Loading ...
Loading ...
Loading ...
11
EN
6.
CONTROLS AND
INDICATORS
- Dry wardrobe : For laundry that can
be directly stored
-Extra-dry : To get completely dry
garments, ideal for full load.
4.Delay Start Button
To postpone the start of the programm for
3h, 6h, or 9h. Opening of the porthole with
delayed start set, after re-closing the
porthole, press start again to resume
the counting.
C- Led
Filter cleaning - It lights up when the
cleaning of the filters is requested (the
door and the lower filter).
These control lights, light up for indicate
the drying phase:
-DRY: It lights up when the drying cycle is
running.
- It light up when the cycle is in the
cooling phase.
-END: It light up when the cycle is done.
This appliances is equipped with Drying
Manager Function. On automatic cycles,
each level of intermediate drying, prior to
the reaching the selected one, is
indicated by flashing the light indicator
corresponding to the degree of drying
reached
A-Programme Selector -
Rotating the knob in both directions it's
possible to select the desired drying
program. To switch or cancel off the dryer
rotate the knob on OFF.
B-Buttons -
1.Start/Pause Button
To start the selected program and/or
suspend it.
2.Time cycle selection
It's possible switch a cycle from automatic to
timed , up to 3 minutes after the start of the
cycle. After this selection to reset the
automatic
drying
functioning is necessary to
switch off the dryer.
3.Drying Selection Button
It allows to set the desired dryness level
editable option up to 5 minutes after the
starting of the cycle:
- Ready to Iron : It leaves the garments
slightly wet to facilitate ironing.
- Dry Hanger : To get garment ready to
be hang.
B
1
2
3
4
D
C
A
Automatic Anti crease
This option automatically activates an anti-
creases movement of the drum, pre cycle in
case of activation of the delay and at the end
of drying cycle for 6 hours. It is activated
every 10 minutes. To stop the movements
set the knob to OFF.
Useful when it's not possible to remove
immediately the laundry.
Loading ...
Loading ...
Loading ...