Loading ...
Loading ...
Loading ...
8 9
DEMO BUTTON
For a brief demonstration of the features of the
massaging cushion, press the DEMO button. The unit
will briefly go through each function. Once complete,
the unit automatically turns off. The L.E.D. lights will
blink to indicate the active functions.
MASSAGE ZONES
Zone buttons cause the moving massage
mechanism to target specific areas of the back.
To select a massage area, simply press the button
and the corresponding L.E.D. light will illuminate.
To deselect, simply press the button again and the
corresponding L.E.D. light will turn off.
FULL BACK
The massage mechanism travels up and down the
back.
UPPER BACK
The massage mechanism focuses from the mid to
upper back.
LOWER BACK
The mechanism focuses from the mid to lower back.
SEAT VIBRATION
To turn on seat vibration press Seat Vibration button
once for low intensity, twice for medium intensity,
and three times for high intensity. The corresponding
L.E.D light will illuminate. To turn off seat vibration,
simply press seat vibration for a fourth time.
POWER BUTTON
To turn on the massage functions, first press the
power button. The L.E.D. indicator will illuminate
and confirm your selection. To turn off the massage
functions, simply press the button again. The L.E.D.
indicator will blink while the massage mechanism
returns to its lowest point, and then it will turn off.
Note: There is a 15-minute auto shut-off on the unit
for your safety.
HEAT BUTTON
For soothing heat when massage is on, simply press
the heat button and the corresponding L.E.D. light
will illuminate. To deselect, press the button again
and the corresponding L.E.D. light will turn off. For
your safety, heat cannot be turned on if massage is
not selected.
SPOT MASSAGE
While the massage function is activated, press
either button to stop and focus the massage action
in one place. Once the unit is operating in spot
massage, you may adjust the mechanism position by
holding down either button until the desired position
is reached. The up arrow will move the mechanism
upward, and the down arrow will move it down. Once
you release the button, the mechanism will stop in
place.
Loading ...
Loading ...
Loading ...