Loading ...
Loading ...
Loading ...
13
ENGLISH
BEFORE USING FOR THE FIRST TIME
USE
Remove all various packaging, stickers or accessories from both the inside and outside of
the kettle (do not forget to remove the transparent protective lm from the screen).
Adjust the length of the cord by winding it under the base. Wedge the cord into the notch.
(fig. 1)
Before rst use, rinse the kettle. Boil water at maximum capacity 2 or 3 times. Throw away
the water.
1. TO OPEN THE LID.
Press the opening button on the lid. It lifts automatically. (fig. 2 and 3)
To close, press the button down rmly on the lid (fig 6).
2. PLACE THE BASE ON A FLAT, STABLE, HEAT-RESISTANT SURFACE AWAY FROM
WATER SPLASHES AND ANY SOURCES OF HEAT.
Kettle is only to be used with the base provided.
3. FILL THE KETTLE WITH THE DESIRED AMOUNT OF WATER. (fig 4)
Never ll the kettle when it is on its base.
Do not ll it above the maximum level, or below the minimum level. If the kettle is too full,
boiling water may spill out (fig 5).
Do not use without water.
Check that the lid is closed properly before use.
4. POSITION THE KETTLE ON ITS BASE. PLUG IT INTO THE OUTLET.
5. TO START THE KETTLE
Press the on/off button on the handle (fig 7).
All the buttons’ LED rings will light up.
TO BOIL THE WATER
2 options:
–If you would like to boil water, simply press the BOIL/BLACK, the LED light on the side
will turn on and ash indicating the boiling process has started (fig 8).
–If you would like to choose your own temperature (160°/DELICATE 175°/GREEN
- 185°/WHITE - 190°/OOLONG - 200°/HERBAL), press the button associated to your
desired temperature, the LED light on the side will turn on and ash to indicate the
heating process has started. (fig 9).
DESCRIPTION
A Body
B Spout
C Handle
D Lid
E Filter
F Power base
G Control Panel
H ON/OFF button
I “BOIL” / “BLACK” tea button
J “DELICATE” tea button
K “GREEN” tea button
L “WHITE” tea button
M “OOLONG” tea button
N “HERBAL” tea button
O “KEEP WARM” button
Loading ...
Loading ...
Loading ...