Loading ...
Loading ...
Loading ...
7
6. REMOVE HYBRID FILTERS
HO0349
Rest the range hood on a table. Protect the table to avoid damaging it. Remove
tape on filters. Lift filters by pushing them towards the back of the hood (opposite
to control side) and flip, then set filters aside.
7. INSTALL GLASS PANELS (SBN MODEL ONLY)
The SBN hood model decorative glass panels are sold separately and have to be installed before completing the hood installation.
HD0568
HD0569
FRONT GLASS PANEL
STUDS LOCATION
REAR GLASS PANEL
STUDS LOCATION
HD0558
GLASS PANEL
STUD
NUT
1. Carefully remove glass panel from its packaging. Remove glass panel nuts (factory installed) from both studs and set aside.
2. Insert glass panel studs in appropriate hood holes.
NOTE: Install the glass panel with the control pictograms on
the front of the hood.
3. While holding glass panel, pre-tighten the previously removed
nuts by hand. Ensure glass panel is centered. Then, using a
3/8” socket, tighten nuts completely.
4. Repeat the same steps for the second glass panel installation.
Loading ...
Loading ...
Loading ...