Loading ...
Loading ...
Loading ...
opened. For effective drying, keep the
door open for 30 minutes after a
programme has ended.
Do not stand in front of the door after the
auto-open signal sounds.
In the case of a malfunction, repair
should only be performed by Godrej
authorised service provider, otherwise
the warranty will be void.
Before repair work, the machine
should be disconnected from the mains.
Do not pull the cable to unplug the
machine. Switch off the water tap.
Operation at a low voltage will cause a
decline in performance levels.
For safety, disconnect the plug once a
program has finished.
To avoid an electric shock, do not
unplug the machine with wet hands.
Pull the plug to disconnect the
machine from the mains, never pull on
the cord.
Due to the danger of explosion, do not
place any chemical dissolving agents into
the machine's washing section.
Check the heat-resistance of plastic items
before washing them in the machine.
Only put items in the machine which
are suitable for dishwashing, and take
care not to overfill the baskets.
Do not open the door while the
machine is in operation, hot water may
spill out. Safety devices ensure the
machine stops if the door is opened.
The machine door should not be left
open. It may cause accidents.
Place knives and other sharp objects
in the cutlery basket in a blade-down
position.
For models with the automatic door-
opening system, when the Energy Save
option is active, the door will open at the
end of a program. To prevent damage to
your dishwasher, do not attempt to
close the door for one minute after it has
1.3 During Usage
PACKING AND THE ENVIRONMENT
Packaging materials protect your machine from damage that may occur during transportation. The
packaging materials are environmentally friendly as they are recyclable. The use of recycled material
reduces raw material consumption and therefore decreases waste production.
CE Declaration of Conformity
We declare that our products meet the applicable European Directives, Decisions and Regulations
and the requirements listed in the standards referenced. Producer company has its right to amend
design and technical specifications reserved.
Conformity with the standards and Test data / EC Declaration of Conformity
All stages related to the machine are executed in accordance with the safety rules provided in all
relevant directives of the European Community.
2004/108/EC/, 2006/95/EC, IEC 436/DIN 44990, EN 50242.
Some machine components and packaging consist of recyclable materials.
Plastics are marked with international abbreviations:(>PE<, >PP<, etc. )
The cardboard parts consist of recycled paper. They can be put into waste paper containers for
recycling.
Material unsuitable for domestic waste must be disposed off at recycling centres.
Contact a relevant recycling centre to obtain information about disposal of different materials.
RECYCLING
4
Loading ...
Loading ...
Loading ...