Loading ...
Loading ...
Loading ...
ENGLISH - 11
SYSTEM CONTROLS
10 - ENGLISH
Touch pad
The system has a touch-sensitive control pad on the front, center
area of the top panel.
Gently tapping the touch pad:
• Powers on or o the system.
• Snoozes an alarm (see page 16).
• Resets an alarm for the next day (see page 16).
Power on the system
There are two ways to power on the system:
Remote control
• Press .
• Press
, or to power on the system to the selected
source.
Note: Selecting
does not power on a cabled audio device.
Make sure to power on the device first.
Touch pad
Tap the touch pad. The last source you listened to is active.
Standby mode
If the button is not pressed after 24 hours, the system switches to
standby (o). If the 18-minute system standby timer is enabled, the
system automatically switches to standby if no audio is played and
no buttons are pressed for 18 minutes. For more information on the
18-minute system standby timer see “The setup menu” on page
20.
If the system is connected to your network when switching to
standby, the connection is maintained.
Adjust the volume
On the remote control:
• Press
to increase the volume.
• Press
to decrease the volume.
VOLUME - 0 (silent) to 99 (loud) appears on the display to indicate
the level.
When the system is o, the volume can only be adjusted between 10
and 75.
Mute the system
Press to mute or unmute the audio.
Note: While muted, you can press
to lower the volume before
unmuting the system.
Messages on the display
Source indicators:
CD, FM, AM, or AUX
Play mode
Clock
Alarm status
Source or system-related information
BLUETOOTH TECHNOLOGY
Connect a mobile device
Bluetooth wireless technology enables you to stream music from
Bluetooth smartphones, tablets, computers or other audio devices to
your SoundTouch® system.
Before you can stream music from a mobile device, you must
connect the device with system.
1. On the remote control, press and release
until “Ready to
connect” appears on the display.
Tip: You can also press and hold for one second to connect
a device.
2. On your mobile device, turn on the Bluetooth feature.
Tip: The Bluetooth feature is usually found in the Settings menu.
3. Select your Wave system from the device list.
Tip: Look for the name you entered for your Wave system in the
SoundTouch® app. If you didn’t name your Wave system,
the default name appears.
Once connected, the system emits a tone.
Reconnect a mobile device
You can stream audio from a mobile device to the system. If there
are multiple paired devices within range, your system connects to
the most recent paired device that streamed to it. It may take a
minute or two for the paired device to connect. Your system’s display
indicates connection status.
Connect using the remote control
1. On the remote control, press and release , until a Bluetooth
searching message appears on the display.
The system connects to the most recent paired device within
range of your system. If that device is not within range, the
system goes through its list of paired devices until it finds an
available device.
2. On the device, play music.
Note: If a mobile device is connected to your system and you want
to connect to a dierent mobile device, see “Connect a
mobile device.”
Connect using the Bluetooth feature on the
paired device
1. On the mobile device, turn on the Bluetooth feature.
2. Select your SoundTouch® system from the device list.
Your system powers on and emits a tone.
Clear the system’s Bluetooth
pairing list
When you connect a mobile device to the system, the connection is
stored in the system’s pairing list. You may need to clear the pairing
list if you cannot connect to a device. Once you clear the list, you
need to connect the device again.
On the remote control, press and hold
(about 10 seconds) until
a pairing list cleared message appears on the display.
The system is ready to connect to a device.
Use the SoundTouch® app
You can also clear the pairing list using the app.
1. From within the app, select
> SETTINGS > Speaker Settings
and select your system.
2. Open the Bluetooth menu item and clear the pairing list.
Loading ...
Loading ...
Loading ...