Loading ...
Loading ...
Loading ...
ROOM LIGHT
The room light switch has three positions:
ON, DOOR and OFF.
ON position
When the switch is in the ON position
O
1
,
the ceiling light will illuminate.
DOOR position
When the switch is in the DOOR position
O
2
,
the ceiling light will illuminate under the
following conditions:
• the power switch is placed in the LOCK
position
–– remains on for about 15 seconds.
• doors are unlocked by pushing the
UNLOCK
button or the request
switch, with the power switch in the LOCK
position
–– remains on for about 15 seconds.
• any door is opened and then closed with
the power switch in the LOCK position
–– remains on for about 15 seconds.
• any door is opened while the power
switch in the ACC or ON position
–– remains on while the door is opened.
When the door is closed, the light turns
off.
The light will automatically turn off after
10 minutes when the light remains illu-
minated to prevent the battery from be-
coming discharged.
OFF position
When the switch is in the OFF position
O
3
,
the ceiling light will not illuminate, regard-
less of the condition.
CARGO LIGHT
The light illuminates when the rear hatch is
opened. When the rear hatch is closed, the
light goes off. For additional information,
see “Exterior and interior lights” (P. 8-23).
The HomeLink® Universal Transceiver pro-
vides a convenient way to consolidate the
functions of up to three individual hand-
held transmitters into one built-in device.
HomeLink® Universal Transceiver:
• Will operate most radio frequency de-
vices such as garage doors, gates, home
and office lighting, entry door locks and
security systems.
• Is powered by your vehicle's 12–volt bat-
tery. No separate batteries are required. If
the vehicle's 12–volt battery is discharged
or is disconnected, HomeLink® will retain
all programming.
When the HomeLink® Universal Trans-
ceiver is programmed, retain the original
transmitter for future programming pro-
cedures (Example: new vehicle pur-
chases). Upon sale of the vehicle, the
programmed HomeLink® Universal
Transceiver buttons should be erased for
security purposes. For additional infor-
mation, see “Programming HomeLink®”
(P. 2-70).
SIC3513
HOMELINK® UNIVERSAL
TRANSCEIVER (if so equipped)
Instruments and controls 2-69
Loading ...
Loading ...
Loading ...