*P518-150*
P518-150
© Allegion 2017
Printed in U.S.A.
P518-150 Rev. 08/17-a
1 Determine the location.
1a Measure the location of other
knobs/levers in the house.
1b Mark these measurements on the
dummy door.
*
*
** **
2 Install the chassis.
Screws are self-drilling. Do not pre-drill.
Install into holes
marked B.
Use notches to
align to marks.
3 Install the trim.
click
hook
OR
click
hook
4 Install the knob/lever.
4a Push knob/lever into place. 4b Then tighten set screw.
5 Repeat all steps for other side of door if necessary.
Model FC170/172, Dummy Installation Instructions
a. Lever
b. Trim
c. Chassis
d. Chassis screws
e. Allen wrench (Do not discard!)
a
b
c
d
e
