Loading ...
Loading ...
Loading ...
5/8
2. Flush pipe work to ensure it is free from debris.
3. Remove faucet and hardware from its protective packaging. Unscrew injector mount
from back side of faucet.
4. Place the escutcheons and large 'O'rings over the back end of the faucet and place the
faucet into the desired position.
ATTENTION: The rubber ‘O’ring should be sitting between the wall the faucet
escutcheon. DO NOT use putty or other sealant at this location.
NOTE:
Solid surface installation: The sub-countertop mounting surface needs to be flat and
free of debris; otherwise the faucet will not sit properly.
Tile installation: Avoid installations near or on top of grout lines. The escutcheon will
not sit secure when sitting on such.
5. Assure that the handle and spout are properly aligned in correct positions; spout
should swivel face forward toward range and handle should point outward parallel
with horizon. Handle should 1/4" turn downward toward counter top (clockwise).
6. Tighten injector shank into pre-plumbed 1/2” NPT female fitting.
7. Push faucet up to finished wall onto injector.
Loading ...
Loading ...
Loading ...