Loading ...
Loading ...
Loading ...
Owners manual
Connecting the Loudspeakers
Choice of cable
Connections
To make the most of your Django XL loudspeakers, please consider the
following suggestions:
The impact loudspeaker cables can have on the sound is dramatic. Be sure to use the
same brand, type, and length of cable on each channel. Mixing different types and/or
lengths of cable can upset the precise timing and balance of your loudspeaker.
We recommend the use of Jorma Design No 3 cable to achieve maximum result. It is
the same as the loudspeaker’s internal wiring.
At the rear of your Django XL, you will find one pairs of WBT terminals that will accept
any standard connection. Whatever type of connection you use, make sure that the
contact is tight, and has a proper contact area. Tighten the posts, then retighten after a
few days to make sure that the connections haven’t loosened.
Always turn off the power of your entire system before making connections to your
speakers. We recommend using an amplifier with sufficient power (typically a minimum
of 40 watts). In order to obtain the best localization of instruments and voices, as well
as the deepest, most natural bass, it is important to connect your loudspeakers in
phase (which means that the drivers are moving in and out in the same direction and at
the same time). The connectors on the speakers are clearly marked, and those on your
amplifier and speakers cables should be also be marked. Keep all markings consistent
in order to ensure in-phase connections.
5
Loading ...
Loading ...
Loading ...