Loading ...
Loading ...
Loading ...
10
1.5 Setup Requirements
To set up your wireless network, you need a computer that meets
the following system requirements:
• Ethernet RJ-45 (LAN) port (10Base-T/100Base-
TX/1000BaseTX)
• IEEE 802.11a/b/g/n/ac/ax wireless capability
• An installed TCP/IP service
• Web browser such as Internet Explorer, Firefox, Safari, or
Google Chrome
NOTES:
• If your computer does not have built-in wireless capabilities, you may
install an IEEE 802.11a/b/g/n/ac/ax WLAN adapter to your computer
to connect to the network.
• With its triple band technology, your wireless router supports
2.4GHz, 5GHz-1 and 5GHz-2 wireless signals simultaneously. This
allows you to do Internet-related activities such as Internet surng
or reading/writing e-mail messages using the 2.4GHz band while
simultaneously streaming high-denition audio/video les such as
movies or music using the 5GHz band.
• Some IEEE 802.11n devices that you want to connect to your network
may or may not support 5GHz band. Refer to the device's manual for
specications.
• The Ethernet RJ-45 cables that will be used to connect the network
devices should not exceed 100 meters.
IMPORTANT!
• Some wireless adapters might have connectivity issues to 802.11ax
WiFi APs.
• If you’re experiencing such issue, please ensure you update the driver
to the latest version. Check your manufacturer's ocial support site
where software drivers, updates, and other related information can
be obtained.
• Realtek: https://www.realtek.com/en/downloads
• Mediatek: https://www.mediatek.com/products/connectivity-
and-networking/broadband-wi
• Intel: https://downloadcenter.intel.com/
Loading ...
Loading ...
Loading ...