Loading ...
Loading ...
Loading ...
6
TROUBLESHOOTING
STORAGE & CLEANING
Problem Possible cause Solution
No glowing ‘blue’ Power on LED Machine not switched on
Switch on machine at right side and at wall
socket. Press power standby button
Pouch does not completely seal
the item
Item may be too thick to laminate
Maximum document thickness equals .025". Pass
through laminator a second time
Pouch is lost in the machine
Pouch is jammed
Select the reverse button and pull out the pouch
by hand
Pouch was inserted open end first
Pouch was not centered on entry
Pouch was not straight upon entry
Empty pouch was used
Damaged rollers or adhesive on rollers
The reverse button LED is blinking
and a beep is sounding
Pouch is mis-fed or jammed
Press and hold the reverse button on the front of
the machine to remove the laminate
Pouch is damaged after lamination Damaged rollers or adhesive on rollers
Pass cleaning sheets through the machine to test
and clean rollers
Switch the power off located at the rear side of machine. Unplug the machine at the wall. Allow the machine to cool. The outside of
the machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to polish the machine. Cleaning sheets can
be purchased for use with the machine. When the machine is warm – run the sheets through the machine to clean any residue off the
rollers. For optimum performance, it is recommended that cleaning sheets are used with the machine regularly. (Cleaning sheet order
code #5320603).
NEED HELP?
Let our experts help you with a solution.
Customer Service... www.fellowes.com
Always call Fellowes before contacting your place of purchase, see the rear cover for contact details.
Consider registering your machine at www.fellowes.com/register to receive updates and additional information.
Loading ...
Loading ...
Loading ...