Loading ...
Loading ...
Loading ...
ASSEMBLY
10
INSTALLINg AN ATTACHmENT TO THE POWER HEAD (See Figure 3.)
WARNINg
Read and understand entire Operator’s Manual for each optional attachment used on this power
head and follow all warnings and instructions. failure to follow all instructions may result in electric
shock, re and/or serious personal injury.
WARNINg
Never install, remove, or adjust any attachment while power head is running. Failure to stop the
motor can cause serious personal injury. Never operate power head without an attachment.
Fig. 2
gUARD
SCREW
ATTACHINg THE gUARD (See Figure 2.)
NOTE: Install the guard before the attachment is connected to the power head.
• Invert the string trimmer to access the trimmer head.
• Using a Phillips head screwdriver (not included), remove the pre-installed screws from the
trimmer head.
• Place the guard on to the trimmer head and place the guard plate on the guard.
• Align the screw holes on the guard with the screw holes on the trimmer head.
• Insert the screws into the trimmer head, fastening the guard in place.
gUARD PLATE
Loading ...
Loading ...
Loading ...