Loading ...
Loading ...
Loading ...
23
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE WHAT TO DO
Dishwasher
will not start.
No power. Ensure the dishwasher is plugged in and
the power supply is turned on at the wall.
The door is not
properly closed.
Close the door.
Start/Pause button
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
has
not been pressed.
Press the Start/Pause button
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
.
Water tap not turned on. Ensure water is connected and turned on.
Blocked strainer in water
inlet hose.
Check the strainer and clean if necessary
– it is located where the water inlet hose
screws into the tap.
Keylock is activated. Cancel Keylock by pressing and holding
C2, C4 Dishwasher
C6 Dishwasher
and (C1, C2 & C4 models) or
C2, C4 Dishwasher
C6 Dishwasher
and
C2, C4 Dishwasher
C6 Dishwasher
(C6 models) together for
4 seconds until the keylock indicator
goes out.
Lower
spray arm
rotates with
difficulty.
Spray arm holes are
blocked by small items or
food particles.
Clean the spray arm. See ‘Care
and cleaning’ for instructions.
Cover of
detergent
dispenser
cannot be
closed.
Detergent compartment has
been overfilled.
Remove detergent until the cover can
be closed.
Detergent dispenser is
clogged with remnants of
detergent.
Wipe dispenser out with a damp
cloth. Dry the dispenser before
adding detergent.
Remnants
of detergent
stuck inside
dispenser.
Compartment was damp
when filled with detergent.
Wipe dispenser out with a damp
cloth. Dry the dispenser before
adding detergent.
Utensils are blocking the
detergent dispenser
from opening.
Ensure there are no large utensils
positioned in a way that will stop the
dispenser cover from opening when
the dishwasher door is closed.
Buttons beep
and do not
respond.
Keylock is activated. Cancel Keylock by pressing and holding
C2, C4 Dishwasher
C6 Dishwasher
and (C1, C2 & C4 models) or
C2, C4 Dishwasher
C6 Dishwasher
and
C2, C4 Dishwasher
C6 Dishwasher
(C6 models) together for
4 seconds until the keylock indicator
goes out.
Water
remains
inside
dishwasher
after wash
has
ended.
Drain hose is crimped, bent,
or blocked.
Check the drain hose and straighten
if needed.
Pump is jammed. Call your Fisher & Paykel Authorised
Service Centre or Customer Care.
Filter(s) blocked. Clean the filter(s). See ‘Care and cleaning’
for instructions.
Loading ...
Loading ...
Loading ...