Loading ...
Loading ...
Loading ...
Care and Maintenance
28 - English
Resetting the system
1. Press and hold the Power button on the control console for 5 seconds
or until the system status indicator on the control console changes to red.
The system status indicator on the control console changes to red when the
system shuts down.
2. Release the Power button
on the control console to restart the system.
The system status indicator changes to blinking green and then solid green
when the system is on and ready to use.
3. If you still cannot operate the system using the remote, try the next procedure
to pair the remote with the control console.
Pairing the remote with the console
You may need to perform this procedure if you are replacing a remote or if
troubleshooting instructions recommend it.
1. Make sure your system is on. If not, press the Power button
on the
control console.
2. Hold the remote close to the control console.
3. Press and hold both the Mute button
on the control console and the OK
button on the remote at the same time for five seconds. The system status
indicator blinks when pairing is complete.
4. Press any remote button and verify that the system status indicator on the
control console blinks with each button press.
Loading ...
Loading ...
Loading ...