*P515-302*
P515-302
or o ou
or o ou
1 2 3 4 5
1 Check door preparation.
Verique de la puerta y la preparación de la misma.
Vérier la préparation de porte.
2¹⁄₈” (54 mm)
Through Hole
Agujero Pasante
Trou Traversant
⁷⁄₈” (22 mm)
or o ou
1” (25 mm)
2³⁄₈” (60 mm)
or o ou
2³⁄₄” (70 mm)
2 Choose faceplate to match door.
Escoja la placa delantera para emparejar la puerta.
Choisir la têtière pour égaler la porte.
OR O OU
3 For UL functions only (CF, CS)
Sólo para funciones UL (CF, CS)
Pour fonction UL seulement (CF, CS)
Outside
Exterior
Extérieur
4
F-Series, F-Series UL
Installation Instructions
Instrucciones de instalación
Notice d’installation
L Keyed Entrance (F51) shown
L Se muestra Entrada con llave (F51)
L Vue d’une Entrée avec clé (F51)
C
L
C
L
Fold on door edge.
Mark center of
door thickness for
hole diameter
⁷⁄₈" (22mm) or
1" (25mm) for
circular drive-in.
1³⁄₈"
(35mm)
1³⁄₄"
(44mm)
2³⁄₈"
(60mm)
2³⁄₄"
(70mm)
Important: Place template
on high edge of door bevel.
F-Series universal backset
adjusts for either 2³⁄₈"
or 2³⁄₄" backsets.
Recommended height
from center of lock to floor
is 38" (96.5cm) and to center
of deadbolt is 4" (10cm)
Select correct backset
2³⁄₈" (60mm) or 2³⁄₄" (70mm).
Drill 2¹⁄₈" (54mm) hole.
TEMPLATE
Customer Service Servicio al cliente Service à la clientèle
Phone: 1-888-805-9837
Telefono: 018005067866
www.schlage.com
© Allegion 2018
Printed in U.S.A.
P515-302 Rev. 8/18-h
For warranty, go to
Para obtener garantía e información, diríjase a
Pour obtenir la garantie, consultez le site
https://instructions.allegion.com/instr/114/0
Loading ...
