Loading ...
Loading ...
Page | 3327-1417 Color Wind Speed Weather Station
Setup Preparation
Items you will need to setup your station (not included):
1. Phillips head screwdriver for assembly.
2. Fresh Batteries:
3 (three) AA alkaline batteries for the station (optional)
2 (two) AA alkaline or lithium batteries for the TH sensor.
2 (two) C alkaline or lithium batteries for the Wind sensor.
For best results:
• Remove weather station and sensors from the package and place together on a table
or bench, within easy reach.
• Place batteries and screwdriver within reach of setup location.
• Keep sensors and weather station within 5-10 feet for at least 15 minutes after
installing batteries. This allows the sensors and station to sync properly and ensures a
strong connection.
Quick Setup
1. Power up: Select channel 1 on the outdoor Thermo-hygro sensor then insert 2-AA
batteries. Insert 2-C batteries into the Wind sensor. Insert the power cable into the
weather station.
2. Congure basic settings. Set Time, Date etc.
3. After 15 minutes, place sensors outside (see mounting instructions on page 14).
Optional: insert 3-AA batteries into the weather station.
Note: Batteries are
not included
TX
°C/°F
1 2 3
Optional
Power
Cable
AA
AA
+
-
AA
+
-
+
-
AA
AA
+
-
+
-
Thermo-hygro sensor
TX141TH-BCH
Wind Speed sensor
TX144W
Weather Station
327-1417
C
C
Red LED on sensors: Both sensors have a red LED light that ashes once during
sensor signal transmission.
Back
to
Top
Loading ...
Loading ...
Loading ...