Loading ...
Loading ...
Loading ...
Mounting Recommendations
14
The controller can be mounted using the existing mounting holes or using the included
mounting brackets.
Mounting Recommendations
NEVER
install the controller in a sealed enclosure with flooded batteries. Gas can
accumulate and there is a risk of explosion.
1. Choose Mounting Location—place the controller on a vertical surface protected from
direct sunlight, high temperatures, and water. Make sure there is good ventilation.
2. Check for Clearance—verify that there is sufficient room to run wires, as well as clearance
above and below the controller for ventilation. The clearance should be at least 3 inches (75mm).
3. Mark Holes
4. Drill Holes
5. Secure the charge controller.
WARNING
3 inches
(75mm)
3 inches
(75mm)
warm air
cool air
Loading ...
Loading ...
Loading ...