Loading ...
Installing Thermostat Guard with New Thermostat
Disconnect power supply to prevent electrical shock or equipment damage.
WALL
THERMOSTAT
BASE
MOUNTING
SCREWS (4)
MOUNTING
HOLES (4)
SUBBASE
GUARD
W
ALL PLATE
1. Place the thermostat sub-base on the thermostat guard wall plate and use the thermostat sub-base as a guide.
2. Mark and drill the necessary 5/32 inch mounting holes. Take care to align wire opening in both wall plate and
sub-base. NOTE: The curved edge of the wall plate should face down. Ensure mounting position allows adequate
clearance to open doors and covers.
3. Run the system wires through the wiring hole in the thermostat guard wall plate.
4. Mount the thermostat sub-base and the thermostat guard wall plate to the wall. NOTE: If thermostat is a back-wired
thermostat, wire the thermostat before mounting it to the wall.
5. Refer to thermostat manual to wire thermostat.
6. Mount the thermostat on the sub-base.
7. Place the base over the mounted thermostat and wall plate and mount using the four anchors and
screws provided.
Removing Thermostat Guard Cover
• Unlock the thermostat guard by inserting the key and turning clockwise.
• Remove the thermostat guard cover by lifting cover away from the base and off the hinges.
Important Safety Information
Warning
8. Mount the thermostat guard cover by placing the hinged edge of the thermostat guard cover over the top
edge of the base and lowering the cover to the base. NOTE: The key must be in the UNLOCKED position.
9. Lock the thermostat guard by turning the provided key counterclockwise. The key can ONLY be removed when
it is in the LOCKED position.
Limited Warranty
When installed by a professional contractor, this product is backed
by a 1 year limited warranty. Limitations apply. For limitations, terms
and conditions, you may obtain a full copy of this warranty:
· Visit us online: www.braeburnonline.com/warranty
· Phone us: 866.268.5599
· Write us: Braeburn Systems LLC
2215 Cornell Avenue
Montgomery, IL 60538
5970-100-03
Store this manual for future reference.
©2016 Braeburn Systems LLC • 2215 Cornell Avenue, Montgomery, IL 60538
Technical Assistance: www.braeburnonline.com
Call us toll-free: 866-268-5599 (U.S.) • 630-844-1968 (Outside the U.S.)
All Rights Reserved • Made in China