Loading ...
Loading ...
Loading ...
CONTROL PANEL FUNCTIONS
3
11
NOTICE
When this heat function is used for the first time, a slight odor may be present.
This is normal and should not occur again unless the heater is not used for an
extended period of time.
½
CONTROLS FUNCTION
Main Power
ON/OFF
Press ON. Power turns ON. All functions are enabled.
Press OFF. Power, flame effect, and all functions
turn off.
Power Indicator
When power is ON, red light will glow.
Flame Button
Press Flame Button to desired flame color.
10 different color options.
Flame +/-
Press Flame (+/-) Button to desired flame brightness.
3 options. ONLY works when flame button is ON.
Flame Speed
Press Flame Speed Button to desired flame speed.
5 options.
Timer +/-
Press Timer (+) once to increase timer setting by
hour increments. Maximum timer setting is 7½ hours.
Indicator light will illuminate.
Press Timer (-) once to decrease timer setting by ½
hour increments.
Heat
Press the Heat Button once, 750W (LOW HEAT)
heater turns on and the fan starts to blow warm air.
Press the Heat Button again, 1,500W (HIGH HEAT)
heater turns on and blows hot air.
Press the Heat Button again and heater turns OFF.
The fan will continue to blow to allow heater to cool
down, and then turns off.
Thermostat
Control
Heater must be ON either LOW or HIGH heat for the
thermostat function to operate. The heat output is
controlled by the Thermostat Control. Set the
Thermostat Control to the maximum position initially.
When the room reaches the desired temperature,
reduce the setting by slowly turning the thermostat knob
counterclockwise until the heater will click and turn off.
The heater will then maintain the room temperature at
the desired level.
1/2h
1h
2h
4h
FLAME
FLAME
+
FLAME SPEED
TIMER
HIGH HEAT
Thermostat
TIMER
ON
OFF
-
+
-
LOW HEAT
FUEL BED
FUEL BED
+
-
Fuel Bed
Press Fuel Bed Button to desired fuel bed color.
10 different color options.
Fuel Bed +/-
Press Fuel Bed (+/-) Button to desired brightness.
3 options. ONLY works when flame button is ON.
Loading ...
Loading ...
Loading ...