Loading ...
Loading ...
Loading ...
3
GB
To access the exhaust lter:
1. Unclip the exhaust lter cover from the rear of the cleaner main body. [14]
2. Remove the exhaust lter from the rear of the cleaner. [15]
3. Gently tap and wash the lter using warm water. Do not use hot water or detergents.
Remove excess water from the lter and leave to dry fully before re-using. [16] [17]
4. Ret the exhaust lter to the rear of the cleaner once fully dry and ret the exhaust lter cover.
IMPORTANT: Do not use the product without the lter pack tted.
Cleaning the dust container / separation unit
This cleaner uses a separation system unique to Hoover. If necessary the separation unit
can be disassembled from the dust container and cleaned.
1. Press the dust container release button and remove the bin assembly from the cleaner. [8]
2. Hold the bin with one hand and with the other hand remove the dust container lid by
rotating anti-clockwise. [9]
3. Remove the dust container lid by rotating anti-clockwise. And remove the pre-motor
lter from dust container assembly.[10] And then remove the vortex nder from the
dust container by pulling. [11]
4. If necessary, use a cloth to remove excessive dust from the vortex nder surface.
Reassemble the internal components to the bin.
5. Reassemble the dust container lid to the dust container. Ret the dustbin to the cleaner.
Removing a blockage
1. Check if the Dust Container is full. If so, refer to ‘Emptying The Dust Container’.
2. If the Dust Container is empty, but suction is still low:
A. Do the lters need cleaning? If so, refer to ‘Cleaning the Washable Filters’.
B. Check if there is any other blockage in the system - Use a rod or a pole to remove any
blockage from the tubes or hose.
C. Check for and clear any blockage in the Nozzle
D. Check if the separation unit needs to be cleaned. Refer to ‘Cleaning the separation
unit.
WARNING - If the cleaner is used for a signicant period of time with a blockage, a thermal cut
out will switch the cleaner o to prevent overheating. If this should happen, switch the cleaner o,
unplug and correct the fault. It will take about 45 minutes for the cut out to automatically reset.
USER CHECKLIST
Should you have a problem with the product, complete this simple user checklist before calling
your local Hoover service.
• Is there a working electricity supply to the cleaner?
Please check with another electrical appliance.
• Is the dust container over-filled? Please refer to ‘Cleaner Maintenance’.
• Is the lter blocked? Please refer to ‘Cleaner Maintenance’.
• Is the hose or nozzle blocked? Please refer to
‘Removing a blockage from the system’.
• Has the cleaner overheated? If so, it will take
approximately 30 minutes to automatically reset.
*Certain Models Only ** Certain models only, nozzles may vary according to model
IMPORTANT: All bagless cleaners require regular lter cleaning. Failure to clean
your lters may result in air blockage, overheating and product failure. This may
invalidate your guarantee.
IMPORTANT:
Regularly check and maintain the lters.
IMPORTANT:
Always ensure the lter pack is fully dry before use.
To access the lter:
1. Remove the dust container from the cleaner [8]
2. Hold the dust container with one hand, and remove the dust container lid by rotating
anti-clockwise. [9]
3. Remove the pre-motor lter assembly from bin assembly. [10]
4. Gently tap and wash the pre-motor lter. Do not use hot water or detergents. Remove
excess water from the lter and leave to dry fully before re-using. [13] [17]
5. Reassemble the pre-motor lter assembly once fully dry and ret to the cleaner.
IMPORTANT INFORMATION
Hoover Spares and Consumables
Always replace parts with genuine Hoover spares. These are available from your local Hoover
dealer or direct from Hoover. When ordering parts always quote your model number.
Quality
Hoover’s factories have been independently assessed for quality. Our products are made using
a quality system which meets the requirements of ISO 9001.
Your Guarantee
The guarantee conditions for this appliance are as dened by our representative in the country
in which it is sold. Details regarding these conditions can be obtained from the dealer from
whom the appliance was purchased. The bill of sale or receipt must be produced when making
any claim under the terms of this guarantee.
Subject to change without notice.