Loading ...
Loading ...
English - 3
Important Safety Instructions
Bose Corporation hereby declares that this product is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive
requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance
The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/
EC, is in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by
Regulation (EU) No. 801/2013.
Required Power State Information
Power Modes
Standby Networked Standby
Power consumption in specified power mode, at
230V/50Hz input
≤
0.5 W Bluetooth® ≤ 2.0 W
Time after which equipment is automatically
switched into mode
≤
30 minutes
≤
5 minutes
Power consumption in networked standby if all wired
network ports are connected and all wireless network
ports are activated, at 230V/50Hz input
N/A
≤
2.0 W
Network port deactivation/activation procedures.
Deactivating all networks will enable standby mode.
Bluetooth: Deactivate by clearing the pairing list by pressing and
holding the Bluetooth button for 10 seconds. Activate by pairing with a
Bluetooth source.
External Power Supply Technical Information
The external power supply provided with the product, in accordance with the Ecodesign Requirements for Energy
Related Products Directive 2009/125/EC, is in compliance with the following norms(s) or documents(s):
Commission Regulation (EU) 2019/1782.
Manufacturer
Bose Products B.V.
Commercial registration
number
36037901
Address
Gorslaan 60
1441 RG Purmerend
The Netherlands
Model identifier
S008XM0500160
Input voltage
100V-240V
Input AC frequency
50Hz/60Hz
Output voltage
5V DC
Output current
1.6A
Output power
8W
Average active efficiency
79.4%
Efficiency at low load (10%)
75.8%
No-load power consumption
0.05W
For Europe:
Frequency band of operation 2400 to 2483.5 MHz.
Maximum transmit power less than 20 dBm EIRP.
Maximum transmit power is below regulatory limits such that SAR testing is not necessary and exempt per
applicable regulations.
Loading ...
Loading ...
Loading ...