Loading ...
Loading ...
Loading ...
Frequently Asked Questions
59
Message Possible cause and solution
Clean the lint and
plinth filters. See the
Operating Instruc-
tions for more infor-
mation. lights up
at the end of a
program.
The tumble dryer is not working correctly or econom-
ically. Possible causes could be clogging caused by
lint or detergent residue.
Please see “Cleaning and care” for notes on clean-
ing.
Clean the lint filters.
Also check the plinth filter and clean it if neces-
sary.
To switch off the message: press OK.
You can influence when the Clean the lint and plinth fil-
ters. See the Operating Instructions for more information.
message lights up.
To do this, follow the instructions in “Settings –
Airway indicator”.
Clean the lint filter.
Check the airways.
lights up after a
program has
been canceled.
The system has been clogged by lint or detergent
residue.
To switch off the message: press OK.
Clean the lint filters and the plinth filter.
Please see “Cleaning and care” for notes on clean-
ing.
Check that the lint filters and the plinth filter are
not damaged or worn.
If all lint filters are damaged, deformed, or cannot be
cleaned anymore, they must be replaced. For infor-
mation on when to replace a plinth filter that is not
functioning properly, refer to “Frequently Asked
Questions – Replacing the plinth filter”.
Loading ...
Loading ...
Loading ...