Contents
TUBULAR HANDLE
1 Handle
2 Standoff
2 Screw, #10–24 x 2"
2 Screw, #10–24 x 2
1
/4"
2 Washer, at
2 Washer, star
1 Instructions
PRO HANDLE
1 Handle
2 Standoff
2 Screw, #10–24 x 2
1
/4"
2 Screw, #10–24 x 2
1
/2"
2 Washer, at
2 Washer, star
1 Instructions
Handle Installation
Panels thicker than
3
/4" may require additional counter bore
depth or longer bolts.
Determine the overall length of the handle. For pro handles,
the overall length includes the standoffs. Refer to the handle
length chart and illustration for the center to center dimension
(A), then mark and drill two
7
/32" holes. Using a smaller bit to
drill pilot holes will help ensure a proper t.
Counter bore panels so the bolt heads and washers are
completely recessed. Place a star and at washer onto each
bolt then insert the bolts through the panel. Refer to the
illustration.
Insert the bolts through the standoffs and into the handle.
Tighten bolts to secure the handle to the panel.
HANDLE LENGTH A
TUBULAR HANDLE
50
1
/8" (1273) 47
1
/8" (1197)
33
1
/4" (845) 30
1
/4" (768)
27
1
/4" (692) 24
1
/4" (616)
24
1
/4" (616) 21
1
/4" (540)
21
1
/4" (540) 18
1
/4" (464)
PRO HANDLE
48
3
/8" (1229) 47
1
/8" (1197)
31
1
/2" (800) 30
1
/4" (768)
25
1
/2" (648) 24
1
/4" (616)
22
1
/2" (572) 21
1
/4" (540)
19
1
/2" (495) 18
1
/4" (464)
Tubular and Pro Handle Installation
subzero.com 800.222.7820
page 1 of 1
7026122 REV-A 02/2013
A
PANEL
FLAT
WASHER
STAR
WASHER
Hole location.
Panel preparation (side view).
