Loading ...
Loading ...
Loading ...
4
Installation
6
8
7
Attach the weights (2) to the hand shower hose at a
suggested distance of 22" [560 mm] from the hose
riser connection. The weights must be attached as
close together as possible. Plumber / Installer
must test and verify the correct distance. Care
must be taken in positioning of the weights so the
hand shower hose does not kink.
Connect the flexible supply hoses to the supply
valves. Turn on the water supply and check for any
leaks
22"
[560 mm]
M15X1
Sealing
washer
&
check
valve
Connect the hand shower hose to the check
valve at the end of the riser. Make sure the
sealing washer is placed between the check
valve and the hand shower hose. Tighten with
wrench.
Plumber / Installer must test and
confirm that all hoses, hose riser and
check valve connection seals are
water tight.
Hand
shower
hose
Loading ...
Loading ...
Loading ...