Loading ...
Loading ...
Loading ...
7
Operation
Pairing or Disconnecting a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Plunge Max and it will automatically go into pairing mode to search for Bluetooth devices.
You will know you are in pairing mode when the Bluetooth icon is slowly flashing.
3. Navigate to your Bluetooth device’s setup screen, find “Plunge Max” and connect.
Note: If your Bluetooth device prompts for a pairing code, enter “0000”.
4. Press and release the Bluetooth button to disconnect a paired Bluetooth device.
5. To connect to another Bluetooth device, repeat step 3.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
Pairing a Bluetooth Device Using NFC
NFC (near-field communication) allows data exchange from devices, such as pairing, by gently bumping them
together. Check in your device’s manual to see if this feature is supported.
To use NFC to pair with Plunge Max:
1. In order to use NFC, your device must be turned on and unlocked.
2. Enter your device’s Settings menu and check that NFC is turned On (one time step).
3. Power on Plunge Max.
4. Touch and briefly hold your device to the NFC logo.
5. Follow the pairing instructions that appear on your phone. If a passcode is required, enter “0000”.
6. To unpair, gently bump your device against the NFC logo located on Plunge Max’s top panel.
Using the Phone
Note: You must power on and pair Plunge Max with your Bluetooth device before using it to listen to music or
as a speakerphone.
When you have an incoming call, Plunge Max’s speaker will play a ringtone.
1. To answer the call, press Plunge Max's Call Receive button.
Note: If you get an incoming call during music playback, the music will pause until you end the call.
2. Speak into the microphone and adjust the call volume using the Volume buttons.
3. To end the call, press the Call End button.
4. To reject an incoming call, press and hold the Call Receive button.
Loading ...
Loading ...
Loading ...