Loading ...
Loading ...
Loading ...
12 | Sub-Zero Customer Care 800.222.7820
INSTALLATION
Side-to-Side Adjustment:
1 Loosen the two mounting screws on the upper and/or
lower cabinet hinge. Refer to the illustration below.
2 Use the Allen wrench provided to rotate the adjustment
screw.
3 Verify the hinge is parallel to the side of the unit, then
tighten the mounting screws.
4 Install the hinge pins and door, then verify the door
alignment.
Alignment
DOOR ADJUSTMENT
The doors are adjustable in and out, up and down, and side
to side. In-and-out and up-and-down adjustments are made
on the door. Side-to-side adjustments are made on the
cabinet hinges. To make any adjustments, remove the door
and hinge pins. Refer to the illustration below.
In-and-Out and Up-and-Down Adjustment:
1 Place the door on a protected work surface, then loosen
the two upper hinge mounting screws.
2 Remove the two lower hinge mounting screws, then
remove the lower hinge.
3 Remove the positioning screw from the bottom of the
door, then use the adjustment pin to make up-and-down
and in-and-out adjustments. Refer to the illustration
below. Each vertical hole location adjusts the door
1
/32"
(1)
. The slotted holes allow for in-and-out adjustment.
4 Once the adjustments are made, install and tighten the
positioning screw.
HINGE
PIN
ADJUSTMENT
PIN
DOOR HINGE
POSITIONING
SCREW
Door removal
Door adjustment
HINGE
SCREW
ADJUSTMENT
SCREW
Cabinet hinge adjustment
Loading ...
Loading ...
Loading ...