Sun Joe JB450E-RM Turbine Electric Jet Blower 440-CFM 8.5-Amp 135-MPH Variable Speed Control Certified Refurbished

OPERATOR’S MANUAL - Page 9

For JB450E-RM.

PDF File Manual, 12 pages, Read Online | Download pdf file

JB450E-RM photo
Loading ...
Loading ...
Loading ...
8
mWARNING! To avoid serious personal injury, do not
wear loose tting clothing or articles such as scarves, strings,
chains, ties, etc., that could get drawn into the air inlet. To
make sure long hair does not get drawn into the air inlet, tie
back long hair.
Blowing Operation
Hold the blower rmly with your dominant hand on the unit
handle. Sweep from side to side with the nozzle several
inches above the ground or oor (Fig. 7).
Slowly advance the unit, keeping the accumulated pile
of debris in front of you. Most dry blowing operations are
better suited to low speeds rather than high speeds. High
speed blowing is best for moving heavier items like large
debris or gravel.
Maintenance
mWARNING! Always wear protective gloves during
maintenance operations. Do not carry out maintenance when
the engine is running or hot.
mWARNING! Use only original manufacturer’s
replacement parts, accessories and attachments. Failure to do
so can cause possible injury and poor performance.
To order genuine replacement parts or accessories for the
Sun Joe
®
JB450E-RM electric jet blower, please visit snowjoe.
com or contact the Snow Joe
®
+ Sun Joe
®
customer service
center at 1-866-SNOWJOE (1-866-766-9563).
mWARNING! Disconnect the extension cord before
performing any maintenance task.
If the extension cord is plugged into the appliance, someone
could accidentally turn on the unit while you are inspecting it,
which could result in serious personal injury.
1. Store the tool, instruction manual and accessories in a
secure, dry place. In this way, you will always have the
information ready at hand.
2. Keep the tool’s air inlet unclogged and clean at all times.
3. Remove dust and dirt regularly. Cleaning is best done with
a rag or brush.
4. Never use water or caustic agents to clean plastic parts.
mWARNING! Do not use cleaning agents to clean the
plastic parts of the tool. A rag or cloth is recommended. Water
must never come into contact with the tool.
Storage
1. Examine the electric jet blower thoroughly for worn, loose,
or damaged parts. Should you need to repair or replace a
part, contact an authorized Snow Joe
®
+ Sun Joe
®
dealer
or call the Snow Joe
®
+ Sun Joe
®
customer service center
at 1-866-SNOWJOE (1-866-766-9563) for assistance.
2. Examine the extension cord thoroughly for signs of excess
wear or damage. If it is worn or damaged, replace it
immediately.
3. Disconnect the extension cord from the electric jet blower
before storing.
4. Clean the blower tube thoroughly before storing. Store the
blower in a dry, well-ventilated place that is inaccessible to
children. Keep away from corrosive agents.
Service + Support
If your Sun Joe
®
JB450E-RM electric jet blower requires
service or maintenance, please call the Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE (1-866-766-
9563).
Model + Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
Fig. 7
Record the following numbers from the housing or handle of your
new product:
Model #:
Serial #:
J B 4 5 0 E - R M
Loading ...
Loading ...
Loading ...