Loading ...
Loading ...
Loading ...
2
1. Tilt the Refrigerator slightly to screw the casters into the
bottom of the unit. Do not place it on its side as this may
cause damage.
2. There are 4 casters. The 2 with locking levers should be
screwed into the front of the Refrigerator and the other 2
casters without locks should be attached at the back.
3. Tighten the casters using a (12mm) wrench and 1/2"
ensure that all the casters are firmly installed.
Installation of Casters
Placement and Operation
Do not tilt the Refrigerator at an angle of more than 45° when
moving it.
The Refrigerator is designed for outdoor use and can withstand
temperatures between 32℉ -101℉ (0℃ to 38℃).
Place the Outdoor Refrigerator in a covered area to protect
from direct sunlight and heavy rainfall.
Place the Refrigerator on a flat level surface.
If placing against a wall, leave at least 3 inches (8 cm) between
the back of the Refrigerator and the wall to allow for adequate
ventilation.
Check the plug and cable before you connect the power and
ensure it is the correct 110 voltage.
Once in place, lock the two front casters to ensure that the
Refrigerator does not move.
After moving the Outdoor Refrigerator in place, wait at least
10 minutes before turning it on, in order to allow the coolant
to settle.
Loading ...
Loading ...
Loading ...