Loading ...
Loading ...
Loading ...
11
mWARNING! Do not operate the cordless chain saw in
a tree, on a ladder, or on a scaold. Using the tool under such
circumstances is extremely dangerous.
mCAUTION! The chain will continue to run for several
seconds after turning o the tool.
Do not use the chain saw under wet conditions. Use extreme
caution when cutting small brush, saplings, or limbs under
tension because slender and tense material may catch the
saw and be whipped toward you, pull you o balance, or
spring back.
Do not use the chain saw to cut vines and/or small underbrush.
mWARNING! Do not let familiarity with this type of tool
prevent you from taking all necessary precautions. Remember
that a careless fraction of a second is sucient to inict
serious injury.
mWARNING! Do not cut trees near electrical wires.
mWARNING! Failure to lubricate the chain will cause
damage to the bar and chain. Use only a good quality bar
and chain oil designed specically for use with chain saws.
NOTE: It is normal for oil to seep from the saw when not in
use. To prevent seepage, empty the oil tank after each use.
When storing the unit for a long period of time (3 months or
longer), be sure the chain is lightly lubricated; this will prevent
rust on the chain and bar sprocket.
1. Prior to each cutting session, run through the daily
checklist (see pg. 19).
2. In the event of an accidental activation, the front hand
brake will engage in the ON position to stop the machine.
Reset the safety brake function by returning the front hand
brake to the OFF position (Fig. 7).
3. Insert both the batteries in the battery compartment
(Fig. 8).
4. To turn the tool on, hold the chain saw rmly with both
hands on the handles. Press the safety lock button, then
squeeze the trigger switch. When the chain saw is running,
you can release the safety lock button (Fig. 9).
5. To turn the tool o, simply release the trigger switch.
NOTE: Do not squeeze the trigger switch until you are
ready to make a cut.
Working Load Indicator
The machine is equipped with an working load indication
system located behind the front hand brake (Fig. 10), which will
be illuminated immediately when battery is installed. Consult to
the table below for the indication of the working status of the
chain saw.
Front hand brake
Fig. 7
ON position
OFF position
Battery pack
Fig. 8
Battery compartment
Safety lock
button
Fig. 9
Trigger switch
Working load
indicator
Fig. 10
Loading ...
Loading ...
Loading ...