Loading ...
Loading ...
Loading ...
11
IMPORTANT! Never allow the battery packs to become
fully discharged as this will cause irreversible damage to
the batteries.
6. When charging is complete, remove the batteries from the
charger by pulling the push lock button and sliding the
batteries backward to unlock it from the charger.
Assembly
m
WARNING! Do not insert the batteries until assembly is
complete. Failure to comply could result in accidental starting
and serious personal injury.
mWARNING! Before performing any maintenance,
make sure the batteries and the safety key are removed from
the unit. Failure to heed this warning could result in serious
personal injury.
mWARNING! The product must be fully assembled
before operation. Do not use a product that is only partially
assembled or assembled with damaged parts.
NOTE: Before using the mower, follow these instructions to
assemble the handle and grass bag.
Handle Assembly
1. The unit arrives with the lower handle in the storage
position and the upper handle detached. Lift the lower
handle to the desired height and tighten the preassembled
knobs. (Fig. 4).
2. Fit the upper handle onto the lower handle. Insert the
provided bolts into the aligned holes on the handles and
secure the knobs onto the bolts (Fig. 5).
Grass Collection Bag Fitting
1. Lift the ejector ap up, and remove the mulching plug
inserted in the rear discharge opening.
2. With the ejector ap lifted up, hold the grass collection
bag by the handle and hook it in from above onto the
hooks on both sides (Fig. 6).
3. Release the ejector ap so that it rests on the grass bag.
(Fig. 7).
Fig. 4
Lower
handle
frame
Preassembled
knobs
Fig. 5
Upper handle
frame
Knob
Bolt
Fig. 6
Ejector
ap
Grass collection bag
Fig. 7
Ejector ap
Grass
collection
bag
Loading ...
Loading ...
Loading ...