www.coyoteoutdoor.c
om
CCD-WD INSTALL GUIDE
Model No. Height Width Depth
Model No. Height Width Depth
CCD-WD
CCD-WD
Cutout Dimensions for Island
Overall Product Dimensions
19
1
/2"
10
1
/4"
OPENING HEIGHT
CUTOUT WIDTH
CUTOUT
HEIGHT
GRILL OPENING WIDTH
FRONT VIEW
1
1
/2" MIN
SUGGESTED
FOR
FRAMING
INCLUDING
COUNTERTOP
INTERIOR
DEPTH
TOP VIEW
40
5
/8"
OVERALL
HEIGHT
40
5
/8"
19
1
/2"
OVERALL WIDTH
OVERALL WIDTH
EXTERIOR
DEPTH
CUTOUT WIDTH
40
5
/8"
42
1
/8"
20
3
/4"
26
1
/2"
25
1
/4"
20
3
/4"
42
1
/8"
42
1
/8"
25
1
/4"
1
1
/4"
DIMENSIONAL RENDERINGS
42 1/8"
20 3/4"
26 1/2"
25 1/4"
19 1/2"
40 5/8"
2 anchor points are located on each side of the doors interior frame (top, bottom, left and right)
Due to wide variance of possible building materials, anchors are not included
When inserting your anchors be sure to use a framing square to ensure the door is not pulled out of square
Additional framing and/or support underneath the rear (hanging portion) of the cabinet is recommended
These specs are accurate but we always suggest having the product physically on site to ensure full understanding of how this product
will coordinate with your build
Im
portant Note to Installer: This file is not intended to replace your Owners' Manual which contains specific safety requirements and
consumer guidelines. Please refer to your Owners' Manual prior to installing or operating your built-in warming drawer.
Install Notes:
Electrical Requirements:
This refrigerator must be installed in accordance with National Electric Codes, as well as state, municipal and local codes
The correct voltage, frequency and amperage must be supplied to the refrigerator from a grounded circuit which is protected by a
properly sized
circuit breaker or time delay fuse.
The proper voltage, frequency and amperage ratings are listed on the product rating plate.
The warming drawer must be properly grounded at all times when electrical power is applied.
Never allow any debris to build up underneath, or in front of the unit, blocking ventilation.
