Loading ...
Loading ...
Loading ...
10
5. To turn the tool OFF, release the trigger switch (Fig. 13).
NOTE: Do not press the trigger switch until you are ready
to make a cut.
Adjusting the Telescoping Pole
1. Rotate the collar counterclockwise to loosen (Fig. 14).
2. Push the two ends of the pole towards each other to
shorten the pole or pull them away from each other to
lengthen the pole (Fig. 15).
3. When you achieve the desired length, rotate the collar
clockwise to secure the pole in place (Fig. 16).
4. Make sure you fully tighten the collar before operating the
saw. Check it periodically for proper tightness during use
to avoid serious injury.
Cutting Tips
Proper Cutting Stance
• Balance your weight with both feet on solid ground.
• Your body should always be to the left of the chain line.
• The most typical cutting application is to position the
unit at an angle of 60° or less depending on the specic
situation (Fig. 17). As the angle of the pole chain saw shaft
to the ground increases, the diculty of making the rst
cut (from the underside of the limb) increases.
Fig. 13
Safety lock button
Trigger
switch
Cord
restraint
Fig. 14
Collar
Fig. 15
Lengthen
Shorten
Fig. 16
Collar
Fig. 17
60º MAXIMUM
Loading ...
Loading ...
Loading ...