Loading ...
Loading ...
Loading ...
ENG 3
2.2. Calibration
If your hoverboard seems to pull to the left or right, you may need to recalibrate its sensors. Step as below:
Step 1: Shut down/level the scooter.
Step 2: Press the Power button for more than 10 seconds until you see the light flashing 5 times.
Step 3: Shutdown scooter again.
Step 4: Power on, finished calibration.
NOTE:
Built in Self-Balance function, it is easy for driving.
2.3. Operating principal
- The hoverboard uses Dynamic equilibrium, using internal gyroscope and acceleration sensors. The status of
the hoverboard is controlled by the center-of gravity. It is adjusted by motor, which is controlled by the servo
control system. When you lean forward, it will sense your actions to accelerate. When you need to turn, slow
it down and move your foot forwards or backwards then the center-of gravity of the body moves left or right
therefore the hooverboard can sense moving left or right.
- The hooverboard has inertial dynamic stabilization system, so it can keep anterior-posterior balance but
cannot guarantee the left and right. So when turning, the scooter needs to be operated slowing, otherwise,
you may be injured.
DC Port
P
ower On/Off
Loading ...
Loading ...
Loading ...