Loading ...
Loading ...
Loading ...
9
EN
■ Place the coffee maker on a hard flat surface.
■ Connect the power cord to a 120V wall socket.
1 - When you plug in the coffee maker for the first time, "1:00 pm" will start flashing on the display. Fig. 1.
Set the time by pressing the H button (m) to set the hour and the MIN button (n) to set the minutes.
The time will appear on the display. It will be automatically set after 5 seconds or by pressing the BREW
button (k).
2 - You can also set or change the time at any other time. Set the time by pressing the H button (m) to set
the hour and the MIN button (n) to set the minutes. The time will appear on the display. Figs. 2 and 3.
It will be automatically set after 5 seconds or by pressing the BREW button.
NB: Your clock is now set and will continue to show the time, even when your machine is in standby mode.
If the machine is unplugged or there is a power failure, the clock will revert to 1:00 pm. Repeat the steps
above to reset the clock.
■ Remove stickers from your coffee maker.
■ Before using your coffee maker for the first time, run a cycle without coffee to rinse the circuit. Fill the water
tank to the maximum level and start a cycle by pressing the brew button (k).
IMPORTANT : Your machine has been designed to work with cold or water at room temperature only.
■ Open the coffee maker lid (b). Fig. 4.
■ Fill the carafe (g) with cold or water at room temperature, then pour it into the water tank (c) Fig. 5.
The number of cups is shown by the water level indicator. Do not exceed 12 cups. Fig. 6.
■ Place the carafe (g) with its lid onto the warming plate (h) making sure that it is properly positioned so as
to activate the coffee pouring mechanism. Fig. 9.
■ Make sure that the filter holder (i) is inserted. Fig. 7. Insert the permanent filter (j) Fig. 8a or a #4 paper
filter into the filter holder (i). If using a paper filter, make sure it is fully opened and properly positioned in
the filter holder. Fig. 8b.
■ We recommend removing the filter holder with the filter before adding the ground coffee. If you accidentally
pour ground coffee into the water tank, do not start the cycle. Clean the tank, otherwise the coffee may
block the water circuit.
2. DESCRIPTION
a
Machine body
b
Lid
c
Water tank
d
Water level indicator
e
Carafe lid
f
Carafe handle
g
Carafe
h
Warming plate
i
Filter holder
j
Permanent filter (avoids paper filters)
k
Brew button
l
AUTO ON button
m
H button
n
MIN button
o
BOLD button
p
1 - 4 cups button
q
CLEAN button
r
KEEP WARM button
s
Filter cartridge holder
t
Filter cartridge
u
Cartridge replacement indicator
v
Spoon
3. SETTING THE CLOCK
4. BEFORE FIRST USE
5. MAKING COFFEE
KR_CAFETIERE_SAVOY_EC312_NAFTA_NC00130916.qxp_Mise en page 1 04/06/2015 14:42 Page9
Loading ...
Loading ...
Loading ...