Loading ...
Loading ...
Loading ...
Operating this unit using the remote
control of a TV
There are three ways to operate this unit using the remote
control of a TV.
0
HDMI control function
Connect this unit to a TV that supports the HDMI control
function with an HDMI cable and enable the HDMI control
setting on the TV to perform basic operations on this unit
(changing the input source, turning the power on and off,
adjusting the volume) with the remote control of the TV.
Refer to “HDMI control function” for more information about
the HDMI control function. (v p. 36)
0
Remote control preset function
If your TV is connected via optical, you may be able control
the volume and mute functions on this unit from your TV
without any further setup if your TV is one of supported
brands.
0
Remote control learning function
If your TV does not support the HDMI control function, use this
unit’s remote control learning function. This enables you to
operate this unit with the remote control of a TV. (“Using the
remote control learning function” (v p. 28))
o
Using the remote control learning function
1
Press and hold the for 3 seconds or more until the
voice guidance responds.
2
Point the remote control of this unit at the remote
sensor of this unit and press the remote control
button to be learned (e.g. VOL +) once.
The voice guidance responds.
.
Approx. 1 ft/30 cm
Contents
Connections Playback Settings Tips Appendix
28
Loading ...
Loading ...
Loading ...