Loading ...
Loading ...
Loading ...
USING YOUR OIL FILLED RADIATOR
Page 9
1. Before connecting your appliance to the mains socket,
position the appliance upright on the floor, at least 90cm
away from the wall, away from curtains, furniture or wall
coverings.
2. Insert the mains plug into a suitable 13 amp mains socket.
3. Turn the Power Control to the ‘I’, ‘II’ or ‘III’ position. The
appliance has 3 power settings.
Power Control Position RHOFR5001 RHOFR5002
OFF Power OFF Off Off
I Low heat ON 600W 800W
II Medium heat ON 900W 1.2kW
III High heat ON 1.5kW 2.0kW
4. Turn the Thermostat Control to the desired position. It is
recommended to select the highest position to pre heat
the appliance. It will take 5 -10 minutes for the appliance
to fully heat up, the time taken for the heater to heat the
room it is located in will be dependent on the size of the
room and the ambient temperature of the room. The
indicator light will illuminate when the unit is working, but
the light will cycle on and off when the thermostat control
is set on a low setting and the heater is then maintaining
the room temperature.
Note: this appliance will not operate if the thermostat has
been set too low.
Note: If the thermostat dial is set toward the maximum setting
and the power control is set to off then the indicator light will
stay illuminated. No heat will be emitted as the power to the
heating elements is off.
Loading ...
Loading ...
Loading ...