Loading ...
Loading ...
DESCRIPTION
1) Front guard
2) Safety screw plus nut
3) Guard surround
4) Propeller
5) Propeller fixing screw
6) Screws
7) Rear guard
8) Handle
9) Motor unit + shaft
10) Swing control
11) ON/OFF/MIN/MED/MAX knob
12) Power cable
13) Tilt control
14) Base
15) Screws
ASSEMBLING THE FAN
• Assemble the fan as follows:
• Remove the four screws and washers (15)
from the base of the shaft (9), then attach
the motor unit and shaft (9) to the fan
base (14) using the four washers and
screws (15).
• Remove the four central screws (6) and
washers from the motor unit (9). Attach the
rear guard to the motor unit, centring it
and fixing it with the screws removed pre-
viously.
Note: When positioning the rear guard (7),
make sure the handle (8) faces upwards.
• Fit the propeller (4) with the screw (5)
facing the motor unit. Lock the propeller in
position using the fixing screw (5), making
sure it corresponds to the flattened area of
the motor shaft.
•Position the front guard (1) near the rear
guard (7) and fasten it using the surround
(3), safety screw and nut (2).
IMPORTANT
Make sure your mains voltage corresponds to
the voltage indicated on the rating plate.
• Connect your fan to an efficiently earthed
socket only.
• Complete assembly before turning the
appliance on.
• Children or infirm persons should not be
allowed to use this product unsupervised
• Children should not be allowed to play
with this appliance
• For indoor use only. Rain and water are
dangerous in the presence of electricity.
• Use on stable horizontal surfaces only to
avoid the fan tipping over.
• Do not use in damp environments or in
particularly humid rooms such as bath-
rooms etc.
• Do not insert any object into the guard
while the fan is in operation.
•Before removing the guard, always unplug
from the mains.
• Incorrect installation could be hazardous,
with the risk of electric shock.
• Always disconnect the appliance from the
mains before cleaning or moving.
• If necessary, have the power cable repla-
ced by a qualified person only.
Note: To avoid the risk of fire or electric shock,
never use the appliance with additional
speed controls.
Description/Assembly
GB
GB
GB 5-04-2005 9:30 Pagina 6
Loading ...