Loading ...
Loading ...
Loading ...
12
3. Extend the pole to the desired length (Fig. 21).
NOTE: Push poles toward each other to shorten the pole
or pull them away from each other to lengthen the pole.
Only extend the pole to the minimum length required to
reach the limb to be cut.
4. Lock the pole in position by tightening the lock nut
clockwise with the knob (Fig. 22), and ensure that the
pole is secure.
mWARNING! Failure to lock the telescoping pole lock nut
as directed could result in personal injury.
Tightening the Lock Nut (Optional)
The retaining lock nut may need tightening to secure the
telescoping pole in place.
To tighten the lock nut behind the knob, use the hex key
wrench and ensure that the pole is secure. The wrench may be
required to loosen the retaining lock nut to adjust the pole to a
dierent height (Fig. 23).
Cutting Tips for Pole Chain
Saw
Proper Cutting Stance
• Balance your weight with both feet on solid ground.
• Your body should always be to the left of the chain line.
• The most typical cutting application is to position the
unit at an angle of 60° or less depending on the specic
situation (Fig. 24). As the angle of the pole chain saw shaft
to the ground increases, the diculty of making the rst
cut (from the underside of limb) increases.
Fig. 21
Telescoping pole
Fig. 22
Knob
Lock nut
Fig. 23
Hex key wrench
Lock nut
R
Fig. 24
60º MAXIMUM
Loading ...
Loading ...
Loading ...