Loading ...
Loading ...
Loading ...
8
12V DC POWER CONNECTION
When operating this appliance on battery (12 Volt) power, use the 12V DC cable provided. If you
have a blown fuse, always replace the built-in fuse with one of the same rating of 10A.
115V POWER CONNECTION
Use this option when cooling down the unit for the first time and/or when you want to cool down
the unit in preparation for use in your RV or use on your DC generator.
When operating this refrigerator on AC it requires a standard 115/120 Volt A.C./60Hz electrical
outlet with two prong plug.
Electrical Connection (AC Operation
~Warning~
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord
is damaged, have it replaced by an authorized Avanti Products service center.
This appliance should be properly grounded for your safety. The power cord of this
appliance is equipped with a three-prong plug which mates with standard three prong
wall outlets to minimize the possibility of electrical shock.
Do not under any circumstances cut or remove the third ground prong from the power
cord supplied.
This appliance requires a standard 115Volts~/60Hz electrical outlet with three-prong
ground.
The cord should be secured behind the appliance and not left exposed or dangling to
prevent accidental injury.
Never unplug the appliance by pulling the power cord. Always grip the plug firmly and
pull straight out from the receptacle.
Do not use an extension cord with this appliance. If the power cord is too short, have
a qualified electrician or service technician install an outlet near the appliance.
EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly
recommended that you do not use an extension cord with this unit. However, if you
must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-
wire grounding type appliance extension cord having a grounding type plug and
outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
SURGE PROTECTOR
Most electrical appliances use a series of electric control boards to operate. These
boards are very susceptible to power surges and could be damaged or destroyed.
If the appliance is going to be used in an area or if your city / country is prone to
power surges / outages; it is suggested that you use a power surge protector for all
electrical devices / appliances you use. The surge protector that you select must
have a surge block high enough to protect the appliance it is connected to. If you
have any questions regarding the type and size of surge protector needed contact a
licensed electrician in your area.
Damages due to power surges are not considered a manufacturer covered defect
and will void your product warranty.
Loading ...
Loading ...
Loading ...