Loading ...
Loading ...
Loading ...
- 9 -
6. CHOOSE THE OPENING(S) (INTERNAL BLOWER HOOD ONLY)
Remove the knockout for the chosen opening(s) (horizontal at the back of the hood or vertical on top). See illustrations below.
VERTICAL DISCHARGE
HORIZONTAL DISCHARGE
1
2 3
HR0021
1
2
3
Punch out the appropriate electrical knockout hole on top (A) or back (B) of the
hood. Install the wire clamp (included in parts bag).
HR0024
B
A
7. HORIZONTAL DISCHARGE INSTALLATION (INTERNAL BLOWER(S) ONLY)
All internal blower hoods are factory shipped with the blowers mounted for a vertical discharge configuration. For a horizontal
discharge configuration, disassemble the blower(s) from the inner top of the hood and mount it (them) to the back panel of the
hood. The procedure below applies for one or two motors.
HE0085
Unplug the blower.
HD0282
RIGHT SIDE
MOUNTING SCREW
LOCATION
Using a 5/16” socket, remove all
blower mounting screws from the
inner top of the hood. Keep the
screws for further use.
HD0269
LEFT SIDE MOUNTING
SCREW LOCATION
Loading ...
Loading ...
Loading ...