Loading ...
Loading ...
Loading ...
4
Unpacking
Quick Setup
When you receive your loudspeakers, you should make sure that the shipping box is in its
original state. If that is not the case, please contact your dealer.
Unpack the loudspeaker carefully, as there are several parts that can be damaged. We suggest
that you keep your box and inserts. You may need them for transporting your loudspeakers.
Make sure that each of your shipping boxes contains the following:
2 pcs Mingus Orchestra loudspeaker
8 pcs Marten IsoPucks
4 pcs terminal jumpers (for single wiring)
1 pcs Owner’s Manual
We recommend that at least two persons help each other in unpacking the loudspeakers.
• Take the lid o the crates close to the intended listening place.
• Tilt the shipping box up.
• Release the brakes on the wheels.
• Roll out the loudspeaker.
• Roll it to the intended placement.
• Remove the cloth material from the loudspeaker.
• Lock the wheels and change the wheels to Marten IsoPucks by tilting the loudspeaker.
Your Mingus Orchestra loudspeakers need quite a bit of playing time in order to reach
their maximum performance. The use of the burn-in CD enclosed with the Mingus
Orchestra loudspeakers is recommended to speed up this process. Follow these steps:
1. Connect the loudspeakers to your system.
2. Put the CD in your CD player.
3. Choose track 1 and set it on repeat
4. Set the volume to a moderate level
The CD should be played for a minimum of 24 hours before attempting to adjust the
loudspeaker placement. For more in-depth information about this process, please refer to
the section about burn-in.
Loading ...
Loading ...
Loading ...