Loading ...
FULLY ASSEMBLE PRODUCT PRIOR TO USE
ASSEMBLY
1.
Insert handle section into vacuum base. Push
down firmly. Using a Phillips screwdriver,
fasten included screw behind handle into
vacuum base.
2.
Wrap hose around top of hose guide located
on the handle. Insert the hose into hose tube
until you hear a click.
3.
Place bottom of dirt cup into vacuum body
first. Pivot cup into vacuum. Dirt cup is secure
when you hear a click.
NOTE: Place the Crevice Tool into
Wand and slide into tool storage area on
left back side of vacuum and place Turbo
Tool on right back side of vacuum as
shown. Place adjustable dusting brush on
top of wand.
OPERATION
ON/OFF SWITCH
Plug cord into electrical outlet. To turn
vacuum ON (I=0N), push ON/OFF switch (A)
to ON position. To turn vacuum OFF (O=OFF),
push switch to OFF position.
A
CORD RELEASE
Prior to using, grasp the end of the plug and
pull to release the cord from the cord reel
until red tape is reached.
IMPORTANT: When pulling
on the cord, yellow tape will identify when
the cord is almost fully extended. When
red tape is visible on the cord, the cord has
reached its full length. (Do not pull the cord
past the red tape.)
CARPET HEIGHT ADJUSTMENT
To adjust height setting, PUSH DOWN and
TURN knob (C) to desired height setting.
USING HOSE AND ATTACHMENTS
C
CAUTION: To reduce the risk
of injury from moving parts - Unplug before
servicing.
CAUTION: Not to be used for
grooming pet.
1.
To remove hose for tool use, press the hose
release button and pull hose end out. To lock
back into place, push hose into hose tube
until you hear a click..
2.
To attach tool or wand to hose, push firmly
into place.
TO CLEAN STAIRS:
3.
Use the Hose and Turbo Tool (Tool varies per
model) for stair cleaning.
CAUTION: Use extra care
when cleaning on stairs. To avoid personal
injury or damage, and to prevent the cleaner
from falling, always place cleaner at the
bottom of the stairs or on the floor. Do not
place cleaner on stairs or furniture, as it
may result in injury or damage. When using
tools, always ensure handle is in the upright
position.
MAINTENANCE
WARNING: To reduce the risk
of personal injury - Unplug before cleaning
or servicing. Do not use vacuum without dirt
cup or filters in place.
This product contains no serviceable parts.
If appliance is not working as it should, has
been dropped, damaged, left outdoors, or
dropped into water, call customer service at
1-800-944-9200 prior to continuing use.
IMPORTANT: The System
Check Indicator located at (A), alerts you to
possible system performance issues.
A
1.
HOW TO EMPTY
C
2.
Press dirt cup release button (C) and pivot
cup out.
MAINTENANCE (CON’T)
E
D
3.
Hold dirt cup over trash receptacle, push dirt
cup door release lever (D) to open dirt cup
door (E). Close dirt cup door (E). Press firmly
to secure.
4.
Place bottom of dirt cup into vacuum body
first. Pivot dirt cup into vacuum body and
press firmly until it locks into place.
NOTE: To maintain optimal
performance, empty the dirt cup before the
dirt cup reaches the max line (B). Place
the vacuum in the upright position before
removing the dirt cup.
RINSABLE FILTER: HOW TO CLEAN
PART #304087001
NOTE: To maintain optimal
performance, filters should be cleaned at
least every two months under normal use.
1.
To clean: Twist the dirt cup handle
counterclockwise to open and remove lid.
2.
Pull tab to remove rinsable filter. Rinse with
water for two minutes or until water runs
clear. Then squeeze out excess water. Allow
24 hours for filter to dry completely. Replace
filter, tab side out.
3.
Replace dirt cup lid and twist clockwise until
locked in position.
IMPORTANT: Allow filter to
dry completely before replacing
NOTE: To maintain optimal
performance, filters should be cleaned at
least every two months under normal use
CYCLONIC FILTER ASSEMBLY: HOW TO
CLEAN
G
1.
Pull filter assembly (G) out of dirt cup and
remove.
MAINTENANCE (CON’T)
2.
Dirt and debris can be cleaned from the filter
assembly with the adjustable dusting brush.
H
3.
Place the filter assembly on the dirt cup. Line
up tabs (H) on lid with dirt cup body.
4.
Replace dirt cup lid and twist clockwise until
locked in position. Replace dirt cup.
EXHAUST FILTER: HOW TO CLEAN
(Exact filter may vary by model)
PART #440005573
A
1.
With fingers under filter door lip, pull filter
frame (A) out and away from vacuum body.
Hold filter over a trash receptacle and tap out
dirt and debris.
B
2.
Bottom filter (B) must be pushed back into
place first.
C
3.
Then push the upper handle in (C) until it clicks.
C
B
4.
Filter diagram: (B) bottom filter. (C) upper
handle
IMPORTANT: DO NOT
RINSE OR WASH THE FILTER MADE WITH
HEPA MEDIA.
WARNING: To reduce the risk
of personal injury - Unplug before cleaning
or servicing. Do not use vacuum without dirt
cup or filters in place.
NOTE: Place handle in the low
position and turn the cleaner over so the
bottom side is up.
MAINTENANCE (CON’T)
1.
Remove the 6 screws as shown with a Phillips
screwdriver.
2.
Lift o bottom plate (A).
D
C
3.
Remove used belt from brushroll (C) then
from motor shaft (metal rod) (D) and discard.
E
G
4.
With lettering on outside of belt, slide new
belt over motor shaft (metal rod) (E). Then slip
around area of brushroll without bristles (G).
D
G
5.
With belt in place, pull and slide brushroll
into nozzle making sure that the brushroll end
caps are in the correct orientation
6.
Place the bottom plate aligning the screw
holes and re-install the 6 screws
POWERED HAND TOOL: HOW TO CLEAN
(Tools vary per model)
A
1.
Clean the Turbo Tool by removing the two
screws (A), located on the bottom cover, with
a Phillips head screwdriver.
B
2.
Remove the bottom cover (B). Clean out any
debris or hair from the brushroll and turbine fan.
3.
Replace the bottom cover, insert and tighten
the (2) screws.
TROUBLESHOOTING
AVAILABLE REPLACEMENT PARTS AND ACCESSORIES SUCH AS BRUSH ROLLS AND BELTS CAN BE FOUND
ON HOOVER.COM.
IF APPLIANCE IS NOT WORKING AS IT SHOULD, HAS BEEN DROPPED, DAMAGED, LEFT OUTDOORS, OR
DROPPED INTO WATER, CALL CUSTOMER SERVICE AT 1 (800) 944-9200 PRIOR TO CONTINUING USE.
ALWAYS IDENTIFY YOUR CLEANER BY THE COMPLETE MODEL NUMBER. (THE MODEL NUMBER APPEARS ON
THE BACK OF THE CLEANER.)
Loading ...
Loading ...
Loading ...