Installation Guide
& User Manual
IMPORTANT: Read and save these instructions.
NOTICE:
Installer: Leave this guide with the homeowner Homeowner:
Keep this guide for future reference
Under Cabinet Range Hood
UC & UMC series
Under Cabinet
Range Hood
STAINLESS STEEL BAFFLE FILTERS
THANK YOU FOR YOUR PURCHASE
Safety Instructions ..............................................................................3
Parts Diagram ................................................................................ 5-8
Parts Included / Required .................................................................9
Pre-Installation Requirements ........................................................10
Installation Instructions ...............................................................11-12
Important Safety Instructions .........................................................13
Operating Instructions: Push Button Controls .............................14
Operating Instructions: Soft Touch Controls ................................15
Recirculating Charcoal Filters .........................................................16
Maintenance ......................................................................................17
Troubleshooting ................................................................................18
Technical Information ......................................................................19
Warranty & Service .....................................................................21-22
TABLE OF CONTENTS
8 - 3/4"
PARTS DIAGRAM
PARTS DIAGRAM
UC30 / UMC30
8 - 3/4"
PARTS DIAGRAM
UC36 / UMC36
PARTS DIAGRAM
PARTS INCLUDED
PRE-INSTALLATION REQUIREMENTS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
OPERATING INSTRUCTIONS
COMPATIBLE MODELS: UC30 / UC36
OPERATING INSTRUCTIONS
COMPATIBLE MODELS: UMC30 / UMC36
RECIRCULATING CHARCOAL FILTERS
Step 3: Twist and lock the filter into place.
Step 4: Repeat Steps 2-3 on the left side of the motor.
Step 5: Reinstall the ARC-FLOW Baffle Filters back into place.
NOTE: Chimney vent holes must be open
and visible for the filtered air to
recirculate.
Chimney
vent holes
MOTOR
Step 1: Remove the ARC-FLOW Baffle Filters.
Step 2: Locate the motor (pictured below) and align one of the filters with the right side of the motor.
It is recommended that the charcoal filter be replaced every 4-6 months. Charcoal filter replacements
are available for purchase at: www.cosmoappliances.com Charcoal Filter Kit Part# CFK1-TM
SCAN QR CODE
FOR INSTALLATION
VIDEO
MAINTENANCE
TROUBLESHOOTING
2/3
UC 30/UMC 30
UC 36/UMC 36
TECHNICAL INFORMATION
21 22
