Loading ...
Loading ...
Loading ...
25
Section 3. Installation
· IMPORTANT! This appliance must be left to stand in an upright position for at
least 4 hours before being switched on for the first time.
· This appliance has been designed for Domestic Use Only.
· Remove all packaging and securing tape from the appliance.
· Wash the interior of the appliance with luke warm water containing a small
amount of bicarbonate soda (5ml to 0.5 litres of water).
· Position the appliance in a dry atmosphere and out of direct sunlight.
· Do not position next to a cooker or other sources of heat, i.e. radiator.
· This appliance should not be sited in a cold atmosphere, i.e. garage or
shed. Doing so may cause the freezer unit to underfreeze.
· If positioned next to another fridge or freezer, leave a minimum gap of 2cm
between the appliances in order to avoid condensation.
· A clearance of 50mm should be left above the appliance. If this cannot be
achieved you should ensure a clearance of 25mm is maintained on each side of
the appliance.
· Fit the plastic wall spacers to the condenser on the rear of the appliance, this will
ensure an air gap between the appliance and the wall.
· Do not place or store heavy items on the top of this appliance.
· Ensure that the appliance is positioned on a firm flat floor.
· This appliance must be level. Adjust the level by screwing the adjustable feet up
or down (use your fingers or a suitable spanner).
· Ensure that the appliance is upright and both feet are in firm contact with the floor
so that the cabinet is stable.
· Connect the plug to an adjacent 13amp socket out let and ensure that the
appliance is not standing on the supply cable.
Loading ...
Loading ...
Loading ...