Sub-Zero Design Guide
REVISED 10/2015
Features and specications are subject to change at any
time without notice. Visit subzero.com/specs for the most
up-to-date information.
IMPORTANT NOTE: Throughout this guide, dimensions may
vary by ±
1
/8" (3). Dimensions in parentheses are millimeters
unless otherwise specied.
Contents
3 Built-In Refrigeration
38 PRO 48 Refrigeration
44 Integrated Refrigeration
54 Wine Storage
84 Undercounter Refrigeration
94 Sub-Zero Warranties
subzero.com/specs
|
3
BUILT-IN REFRIGERATION
• Energy efcient; many models are ENERGY STAR
®
qualied.
• Advanced water ltration and air purication systems.
• NEW! French door models requires less space for door
clearance to accommodate virtually any-size kitchen.
• NEW! Internal dispenser models provide chilled water
inside the refrigerator—some models also dispense ice.
• Crisper and deli drawers form a lower-temperature zone
for produce and meats.
• Flip-up grille provides easy access for quick routine
maintenance.
• All models are Star-K certied.
Built-In Refrigeration
For the built-in line, Sub-Zero designers and engineers took
a fresh look at everything, inside and out. Exterior rene-
ments include redesigned grilles and lower-prole hinges.
Inside, new technology in food preservation makes the built-
in line nothing short of revolutionary.
KEY FEATURES
• Four distinct design approaches: framed, overlay, ush
inset and stainless steel.
• Handle options coordinate with handles of Wolf cooking
products.
• Dual refrigeration; two compressors preserve food’s
goodness in two sealed compartments.
BUILT-IN MODELS
BI-36R BI-36RG BI-36F BI-30U BI-30UG BI-36U(ID) BI-36UG
BI-36UFD(ID) BI-42UFD(ID) BI-36S BI-42S(ID) BI-42SD BI-48S(ID) BI-48S
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
4
|
Sub-Zero Customer Care 800.222.7820
Built-In Design Options
FRAMED
For the classic Sub-Zero look, choose framed custom
door panels that contrast with the stainless steel full-length
handles and louvered grille (shown). The framed applica-
tion is an overlay model with framed design features. Panel,
grille and handle options are available.
Panels | Custom panels, stainless steel or white enamel.
Grille | Classic louvered grille insert or solid custom panel
for 84" (standard), 83" or 88" overall unit height. Dual wide
grille for dual installations.
Handles | Full-length standard or extended.
OVERLAY
Custom overlay door panels can be combined with unique
handle hardware for design exibility. Shown with pro
handle option to complement Wolf ranges. Customize with
panel, grille and handle options.
Panels | Custom panels or stainless steel.
Grille | Solid custom panel or pro louvered grille for 84"
(standard), 83" or 88" overall unit height. Dual wide grille for
dual installations.
Handles | Custom, tubular or pro handles.
BUILT-IN REFRIGERATION
Overlay.
Framed.
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
5
Built-In Design Options
FLUSH INSET
The ush inset design option allows for ush door and grille
panels and custom handle hardware. Shown with tubular
handle option to match Wolf built-in ovens. The ush inset
application is an overlay model with ush inset panels. Cus-
tomize with panel, grille and handle options.
Panels | Custom panels or stainless steel.
Grille | Solid custom panel or pro louvered grille for 84"
(standard), 83" or 88" overall unit height. Dual wide grille for
dual installations.
Handles | Custom, tubular or pro handles.
STAINLESS STEEL
For a professional look, classic stainless steel models
require no customization. To complement the look of Wolf
ranges, choose the pro handle option (shown). Grille and
handle options are available.
Grille | Pro louvered grille for 84" (standard), 83" or 88"
overall unit height. Dual wide grille for dual installations.
Handles | Tubular or pro handles.
BUILT-IN REFRIGERATION
Flush inset.
Stainless steel.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
6
|
Sub-Zero Customer Care 800.222.7820
Overall Dimensions
ALL REFRIGERATOR / ALL FREEZER
Model BI-36R, BI-36RG and BI-36F.
BUILT-IN REFRIGERATION
36" (914)
84"
(2134)
4" (102)
73
3
/4"
(1873)
23
7
/8"
(606)
37
1
/4"
(946)
14
1
/8"
(359)
23
7
/8" (606)
2
3
/8" (60)
HEIGHT DIMENSIONS ±
1
/2" (13)
26
3
/16" (665)
Overall dimensions are based on stainless steel models.
For ush inset applications, add
1
/2" (13) to door clearance
dimensions.
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
7
BUILT-IN REFRIGERATION
Overall Dimensions
OVER-AND-UNDER
Model BI-30U and BI-30UG.
30" (762)
84"
(2134)
4" (102)
50
3
/4"
(1289)
23"
(584)
23
7
/8"
(606)
23
5
/8"
(600)
31
1
/4"
(796)
12
1
/8"
(308)
26
3
/16" (665)
23
7
/8" (606)
2
3
/8" (60)
HEIGHT DIMENSIONS ±
1
/2" (13)
Model BI-36U(ID) and BI-36UG.
36" (914)
84"
(2134)
4" (102)
50
3
/4"
(1289)
23"
(584)
23
7
/8"
(606)
23
5
/8"
(600)
37
1
/4"
(946)
23
7
/8" (606)
2
3
/8" (60)
HEIGHT DIMENSIONS ±
1
/2" (13)
26
3
/16" (665)
14
1
/8"
(359)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
8
|
Sub-Zero Customer Care 800.222.7820
BUILT-IN REFRIGERATION
Overall Dimensions
OVER-AND-UNDER
Model BI-36UFD(ID).
36" (914)
84"
(2134)
4" (102)
50
3
/4"
(1289)
23"
(584)
23
7
/8"
(606)
23
5
/8"
(600)
19
1
/2"
(495)
8"
(203)
23
7
/8" (606)
HEIGHT DIMENSIONS ±
1
/2" (13)
2
3
/8" (60)
26
3
/16" (665)
Model BI-42UFD(ID).
42" (1067)
84"
(2134)
4" (102)
50
3
/4"
(1289)
23"
(584)
23
7
/8"
(606)
22
1
/4"
(565)
9"
(229)
23
7
/8" (606)
HEIGHT DIMENSIONS ±
1
/2" (13)
2
3
/8" (60)
26
3
/16" (665)
23
5
/8"
(600)
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
9
BUILT-IN REFRIGERATION
Model BI-36S.
36" (914)
84"
(2134)
4" (102)
73
3
/4"
(1873)
23
7
/8"
(606)
22
1
/4"
(565)
7
1
/4"
(184)
8
3
/4"
(222)
23
7
/8" (606)
2
3
/8" (60)
HEIGHT DIMENSIONS ±
1
/2" (13)
26
3
/16" (665)
Overall Dimensions
SIDE-BY-SIDE
Model BI-42S, BI-42SID and BI-42SD.
42" (1067)
84"
(2134)
4" (102)
73
3
/4"
(1873)
23
7
/8" (606)
23
7
/8"
(606)
26
1
/4"
(668)
10
3
/8"
(264)
7
1
/2"
(191)
2
3
/8" (60)
HEIGHT DIMENSIONS ±
1
/2" (13)
26
3
/16" (665)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
10
|
Sub-Zero Customer Care 800.222.7820
BUILT-IN REFRIGERATION
Overall Dimensions
SIDE-BY-SIDE
Model BI-48S, BI-48SID and BI-48SD.
48" (1219)
84"
(2134)
4"
(102)
73
3
/4"
(1873)
23
7
/8" (606)
23
7
/8"
(606)
30"
(762)
11
5
/8"
(295)
8
3
/8"
(213)
2
3
/8" (60)
HEIGHT DIMENSIONS ±
1
/2" (13)
26
3
/16" (665)
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
11
Specications
BUILT-IN
INTERIOR CAPACITY
ALL REFRIGERATOR / ALL FREEZER R CU FT (L) F CU FT (L)
BI-36R 23.5 (665)
BI-36RG 23.4 (663)
BI-36F 22.7 (643)
OVER-AND-UNDER R CU FT
(L) F CU FT (L)
BI-30U 13.2 (374) 4.2 (119)
BI-30UG 13.1 (371) 4.2 (119)
BI-36U(ID) 16.4 (464) 5.3 (150)
BI-36UG 16.3 (462) 5.3 (150)
BI-36UFD(ID) 15.7 (445) 5.3 (150)
BI-42UFD(ID) 18.3 (518) 6.4 (181)
SIDE-BY-SIDE R CU FT
(L) F CU FT (L)
BI-36S 12.4 (351) 8.2 (232)
BI-42S 16.3 (462) 8.0 (227)
BI-42SID 15.8 (447) 7.9 (224)
BI-42SD 16.0 (453) 7.9 (224)
BI-48S 19.1 (541) 9.8 (278)
BI-48SID 18.6 (527) 9.6 (272)
BI-48SD 18.8 (532) 9.6 (272)
SHIPPING WEIGHT
ALL REFRIGERATOR / ALL FREEZER LB (KG)
BI-36R 420 (191)
BI-36RG 430 (195)
BI-36F 406 (184)
OVER-AND-UNDER LB
(KG)
BI-30U 462 (210)
BI-30UG 476 (216)
BI-36U(ID) 515 (234)
BI-36UG 529 (240)
BI-36UFD(ID) 529 (240)
BI-42UFD(ID) 582 (264)
SIDE-BY-SIDE LB
(KG)
BI-36S 538 (244)
BI-42S 582 (264)
BI-42SID 608 (276)
BI-42SD 608 (276)
BI-48S 630 (286)
BI-48SID 656 (298)
BI-48SD 656 (298)
Shipping weights are based on stainless steel models.
BUILT-IN REFRIGERATION
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
12
|
Sub-Zero Customer Care 800.222.7820
BUILT-IN REFRIGERATION
Opening Dimensions
STANDARD INSTALLATION
83
3
/4"
(2127)
OPENING
HEIGHT
24" (610)
OPENING
DEPTH
NOTE: Shaded line represents profile of unit.
FRONT VIEWSIDE VIEW
TOP VIEW
W
OPENING WIDTH
OPENING WIDTH
MODEL W
30" Model 29
1
/2" (749)
36" Model 35
1
/2" (902)
42" Model 41
1
/2" (1054)
48" Model 47
1
/2" (1206)
If an 83" (2108) grille height is specied, the opening height
must be decreased by
7
/8" (22). If an 88" (2235) grille height is
specied, the opening height must be increased by 4"
(102).
If two units are installed side by side, refer to page 14 for
dual standard installations.
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
13
BUILT-IN REFRIGERATION
Opening Dimensions
FLUSH INSET INSTALLATION
FLUSH INSET WIDTH
MODEL W
30" Model 32" (813)
36" Model 38" (965)
42" Model 44" (1118)
48" Model 50" (1270)
Dimensions assume a
3
/4" (19) panel thickness.
If an 83"
(2108) grille height is specied, the ush inset
height must be decreased by
7
/8" (22). If an 88" (2235) grille
height is specied, the ush inset height must be increased
by 4"
(102).
If two units are installed side by side, refer to page 15 for
dual ush inset installations.
84"
(2134)
FLUSH
INSET
HEIGHT
1
/4"
(6)
26
3
/16"
(665)
FLUSH
INSET
DEPTH
2
3
/16"
(56)
*3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry.
NOTE: Shaded line represents profile of unit with
3
/4" (19) panel.
FRONT VIEWSIDE VIEW
TOP VIEW
FINISHED
CLEATS*
1
1
/4"
(32)
W
FLUSH INSET WIDTH
4" (102)
1
1
/4"
(32)
2
3
/16"
(56)
3"
(76)*
TYPICAL
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
14
|
Sub-Zero Customer Care 800.222.7820
BUILT-IN REFRIGERATION
Opening Dimensions
DUAL STANDARD INSTALLATION
83
3
/4"
(2127)
OPENING
HEIGHT
24" (610)
OPENING
DEPTH
NOTE: Shaded line represents profile of unit.
FRONT VIEWSIDE VIEW
TOP VIEW
W
OPENING WIDTH
A dual installation kit will be required for this installation.
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
DUAL OPENING WIDTH
MODELS W
Two 30" Models 59
3
/4" (1518)
30" and 36" Models 65
3
/4" (1670)
Two 36" Models 71
3
/4" (1822)
subzero.com/specs
|
15
BUILT-IN REFRIGERATION
Opening Dimensions
DUAL FLUSH INSET INSTALLATION
84"
(2134)
FLUSH
INSET
HEIGHT
1
/4"
(6)
26
3
/16"
(665)
FLUSH
INSET
DEPTH
2
3
/16"
(56)
*3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry.
NOTE: Shaded line represents profile of unit with
3
/4" (19) panel.
FRONT VIEWSIDE VIEW
TOP VIEW
FINISHED
CLEATS*
1
1
/4"
(32)
W
FLUSH INSET WIDTH
4" (102)
1
1
/4"
(32)
2
3
/16"
(56)
3"
(76)*
TYPICAL
Dimensions assume a
3
/4" (19) panel thickness. A dual instal-
lation kit will be required for this installation.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
DUAL FLUSH INSET WIDTH
MODELS W
Two 30" Models 62
1
/4" (1581)
30" and 36" Models 68
1
/4" (1734)
Two 36" Models 74
1
/4" (1886)
16
|
Sub-Zero Customer Care 800.222.7820
BUILT-IN REFRIGERATION
Plumbing
The water supply line should be located within the shaded
area shown in the illustration below. The water supply line
should be connected to the house supply with an easily
accessible shut-off valve. Do not use self-piercing valves.
The water supply line must not interfere with installation of
the anti-tip brackets.
A reverse osmosis system can be used provided there is
constant water pressure of 35–120 psi
(2.4–8.3 bar) supplied
to the unit at all times. A copper line is not recommended
for this application.
Installation must comply with all applicable plumbing codes.
PLUMBING REQUIREMENTS
Water Supply
1
/4" OD copper, braided
stainless steel or PEX tubing
Pressure 35–120 psi (2.4–8.3 bar)
Excess Line for Connection 36" (914)
Electrical
The electrical supply should be located within the shaded
area shown in the illustration below. A separate circuit, ser-
vicing only this appliance is required. A ground fault circuit
interrupter (GFCI) is not recommended and may cause
interruption of operation.
Installation must comply with all applicable electrical codes.
ELECTRICAL REQUIREMENTS
Electrical Supply 115 VAC, 60 Hz
Service 15 amp
Receptacle 3-prong grounding-type
75
1
/2" (1918)
FROM FLOOR
7"
(178)
E
6"
(152)
RIGHT SIDE
OF OPENING
Electrical supply location.
3" (76)
18" (457)
6" (152)
RIGHT SIDE
OF OPENING
AREA EXTENDS
1
/2" (13)
FORWARD ON FLOOR
Water supply location.
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
17
FRAMED PANELS
The framed application is an overlay model with framed
design features. It is not a separate model.
If the custom panel is thinner than
1
/4" (6), a ller material
must be added to achieve a proper t. If the panel is thicker
than
1
/4" (6), rout an edge around the panel or mount the
custom panel on a sheet of
1
/4" (6) thick material and insert
into the channel. Refer to the illustrations below.
Routing, recessing or optional extended handles may be
required for nger clearance. Refer to the full-scale template
on page 32.
When installing two units side by side, refer to page 14 for
dual standard installations.
Custom Panels
For framed, overlay and ush inset applications, custom
door panels must be provided. Handle hardware must
also be provided for overlay and ush inset applications.
Refer to panel requirements below and the charts on pages
20–25 for custom panel dimensions for your specic design
application.
IMPORTANT NOTE: Do not cover a glass door with a solid
panel.
Finish all sides of the custom panels. They may be visible
when the door is open or through the window of glass door
models.
PANEL REQUIREMENTS
WEIGHT PER PANEL MAX
BI-36R, BI-36RG, BI-36F 75 lb (34 kg)
All Other Models 50 lb (23 kg)
Grille Panel 13 lb (6 kg)
PANEL THICKNESS MIN
Framed
1
/4" (6)
Overlay and Flush Inset
5
/8" (16)
BUILT-IN REFRIGERATION
DOOR
1
/4" (6) TRIM REVEAL
1
/4" (6) PANEL
1
/4" (6) min
ROUT TO
1
/4" (6)
DOOR
Panel
1
/4" thick or less.
Panel thicker than
1
/4".
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
18
|
Sub-Zero Customer Care 800.222.7820
BUILT-IN REFRIGERATION
PANEL MOUNTING KIT
A Sub-Zero custom panel mounting kit eliminates the need
for a backer and spacer panel and is avail able through an
authorized Sub-Zero dealer. For local dealer information, visit
the nd a showroom section of our website, subzero.com.
The kit consists of mounting cleats, screws and gages used
to properly position the cleats. The kit is available for all
built-in models except glass door models. Dual installations
require two mounting kits.
OVERLAY PANELS
Overlay panels are typically created by combining a
3
/4" (19)
custom panel, a .10"
(3) spacer panel and a
1
/4" (6) backer
panel. Refer to the illustrations below.
When installing two units side by side, refer to page 14 for
dual standard installations.
1
/8" (3) (OVERLAY)
CUSTOM PANEL
SPACER PANEL
BACKER PANEL
TRIM
5
/16" (8) min
1
/4" (6)
.10" (3)
CUSTOM
PANEL
SPACER
PANEL
BACKER
PANEL
3
/4"
(19)
typical
Panel assembly (cross section).
Panel assembly (rear view).
Custom Panels
PARTIAL FRAMED OPTION
The partial framed kit includes a stainless steel panel for
above and below the external dispenser. Refer to the chart
below for panel width. The kit is avail able through an autho-
rized Sub-Zero dealer. For local dealer information, visit the
nd a showroom section of our website, subzero.com.
PARTIAL FRAMED PANEL
MODEL WIDTH
BI-42SD 15
1
/16" (383)
BI-48SD 18
3
/4" (476)
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
19
BUILT-IN REFRIGERATION
Custom Panels
FLUSH INSET PANELS
The ush inset application is an overlay model with ush
inset panels. It is not a separate model.
The ush inset design allows custom panels to be installed
ush with adjacent cabinets. Similar to overlay, ush inset
panels are typically created by combining a
3
/4" (19) custom
panel, a .10"
(3) spacer panel and a
1
/4" (6) backer panel.
Refer to the illustrations for overlay panels.
For ush inset panels thicker than
3
/4" (19), a 90° door stop
may be required to prevent interference with adjacent
cabinets. Refer to the full-scale templates at the end of this
guide.
When installing two units side by side, refer to page 15 for
dual ush inset installations.
ICE AND WATER DISPENSER
For models BI-42SD and BI-48SD, the refrigerator door
panel must include a cut-out to accommodate the external
dispenser. The thickness of the panel in this area can range
from
1
/4" (6) to a maximum of 1
1
/8" (29). Refer to the illustra-
tions below.
6
5
/16" (160)
3
/32"
(2)
1
/8" (3)
RADIUS
5
/8"
(16)
12
7
/8"
(327)
2"
(51)
1"
(25)
HANDLE
GLASSWELL
Dispenser dimensions.
Handle placement.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
20
|
Sub-Zero Customer Care 800.222.7820
BUILT-IN REFRIGERATION
MODEL BI-36U(ID), BI-36UG
REFRIGERATOR W H
Door Panel 35
3
/4" (908) 49
15
/16" (1268)
FREEZER W H
Drawer Panel 35
3
/4" (908) 18
11
/16" (475)
GRILLE (OPTIONAL) W H
Grille Panel 35
3
/4" (908) 8
15
/16" (227)
BI-36UG A
Stiles / Rails 5
3
/16" (132)
MODEL BI-36UFD(ID)
REFRIGERATOR (2 PANELS) W H
Door Panels 17
5
/8" (448) 49
15
/16" (1268)
FREEZER W H
Drawer Panel 35
3
/4" (908) 18
11
/16" (475)
GRILLE (OPTIONAL) W H
Grille Panel 35
3
/4" (908) 8
15
/16" (227)
MODEL BI-42UFD(ID)
REFRIGERATOR (2 PANELS) W H
Door Panels 20
5
/8" (524) 49
15
/16" (1268)
FREEZER W H
Drawer Panel 41
3
/4" (1060) 18
11
/16" (475)
GRILLE (OPTIONAL) W H
Grille Panel 41
3
/4" (1060) 8
15
/16" (227)
MODEL BI-36R, BI-36RG, BI-36F
REFRIGERATOR/FREEZER W H
Door Panel 35
3
/4" (908) 69
9
/16" (1767)
GRILLE (OPTIONAL) W H
Grille Panel 35
3
/4" (908) 8
15
/16" (227)
BI-36RG A B
Stiles / Rails 5
3
/16" (132) 10
5
/16" (262)
MODEL BI-30U, BI-30UG
REFRIGERATOR W H
Door Panel 29
3
/4" (756) 49
15
/16" (1268)
FREEZER W H
Drawer Panel 29
3
/4" (756) 18
11
/16" (475)
GRILLE (OPTIONAL) W H
Grille Panel 29
3
/4" (756) 8
15
/16" (227)
BI-30UG A
Stiles / Rails 5
3
/16" (132)
Framed Panel Dimensions
H
H
W
H
H
H
W
H
H
W
AA
A
B
H
H
H
W
AA
A
A
H
H
H
W
W W
BI-36R, BI-36F
BI-36RG
BI-30U, BI-36U(ID)
BI-30UG, BI-36UG
BI-36UFD(ID),
BI-42UFD(ID)
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
21
BUILT-IN REFRIGERATION
Framed Panel Dimensions
MODEL BI-36S
REFRIGERATOR W H
Door Panel 19
13
/16" (503) 69
9
/16" (1767)
FREEZER W H
Door Panel 15
7
/16" (392) 69
9
/16" (1767)
GRILLE (OPTIONAL) W H
Grille Panel 35
3
/4" (908) 8
15
/16" (227)
MODEL BI-42S, BI-42SID, BI-42SD
REFRIGERATOR W H
Door Panel 24
13
/16" (630) 69
9
/16" (1767)
FREEZER W H
Door Panel 16
7
/16" (418) 69
9
/16" (1767)
GRILLE (OPTIONAL) W H
Grille Panel 41
3
/4" (1060) 8
15
/16" (227)
BI-42SD W H
Dispenser Cut-Out* 5
7
/8" (149) 12
7
/16" (316)
AB
Cut-Out Location 1
7
/8" (48) 28
3
/4" (730)
MODEL BI-48S, BI-48SID, BI-48SD
REFRIGERATOR W H
Door Panel 28
1
/2" (724) 69
9
/16" (1767)
FREEZER W H
Door Panel 18
3
/4" (476) 69
9
/16" (1767)
GRILLE (OPTIONAL) W H
Grille Panel 47
3
/4" (1213) 8
15
/16" (227)
BI-48SD W H
Dispenser Cut-Out* 5
7
/8" (149) 12
7
/16" (316)
AB
Cut-Out Location 1
7
/8" (48) 28
3
/4" (730)
*For models BI-42SD and BI-48SD, panel thickness in the dispenser
area can range from
1
/4" (6) to a maximum of 1
1
/8" (29). If the panel
is thicker, you must rout out a minimum
1
/4" (6) at landing area to
accommodate the dispenser.
H
H
WW
H
H
WW
B
A
BI-36S, BI-42S, BI-42SID,
BI-48S, BI-48SID
BI-42SD, BI-48SD
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
22
|
Sub-Zero Customer Care 800.222.7820
Overlay Panel Dimensions
MODEL BI-36R, BI-36RG, BI-36F
REFRIGERATOR / FREEZER W H
Overlay Panel 36" (914) 69
3
/4" (1772)
Spacer Panel 35
1
/8" (892) 68
15
/16" (1751)
Backer Panel 35
3
/4" (908) 69
9
/16" (1767)
GRILLE W H
Overlay Panel 36" (914) 9
1
/4" (235)*
Spacer Panel 35
1
/8" (892) 8
5
/16" (211)
Backer Panel 35
3
/4" (908) 8
15
/16" (227)
BI-36RG A B
Stiles / Rails 5
1
/4" (133) 10
3
/8" (264)
MODEL BI-30U, BI-30UG
REFRIGERATOR W H
Overlay Panel 30" (762) 50
1
/8" (1273)
Spacer Panel 29
1
/8" (740) 49
5
/16" (1253)
Backer Panel 29
3
/4" (756) 49
15
/16" (1268)
FREEZER W H
Overlay Panel 30" (762) 19" (483)
Spacer Panel 29
1
/8" (740) 18
1
/16" (459)
Backer Panel 29
3
/4" (756) 18
11
/16" (475)
GRILLE W H
Overlay Panel 30" (762) 9
1
/4" (235)*
Spacer Panel 29
1
/8" (740) 8
5
/16" (211)
Backer Panel 29
3
/4" (756) 8
15
/16" (227)
BI-30UG A
Stiles / Rails 5
1
/4" (133)
BUILT-IN REFRIGERATION
H
H
W
H
H
H
W
H
H
W
AA
A
B
H
H
H
W
AA
A
A
H
H
H
W
W W
BI-36R, BI-36F
BI-36RG
BI-30U, BI-36U(ID)
BI-30UG, BI-36UG
BI-36UFD(ID),
BI-42UFD(ID)
MODEL BI-36U(ID), BI-36UG
REFRIGERATOR W H
Overlay Panel 36" (914) 50
1
/8" (1273)
Spacer Panel 35
1
/8" (892) 49
5
/16" (1253)
Backer Panel 35
3
/4" (908) 49
15
/16" (1268)
FREEZER W H
Overlay Panel 36" (914) 19" (483)
Spacer Panel 35
1
/8" (892) 18
1
/16" (459)
Backer Panel 35
3
/4" (908) 18
11
/16" (475)
GRILLE W H
Overlay Panel 36" (914) 9
1
/4" (235)*
Spacer Panel 35
1
/8" (892) 8
5
/16" (211)
Backer Panel 35
3
/4" (908) 8
15
/16" (227)
BI-36UG A
Stiles / Rails 5
1
/4" (133)
MODEL BI-36UFD(ID)
REFRIGERATOR (2 PANELS) W H
Overlay Panels 17
7
/8" (454) 50
1
/8" (1273)
Spacer Panels 17" (432) 49
5
/16" (1253)
Backer Panels 17
5
/8" (448) 49
15
/16" (1268)
FREEZER W H
Overlay Panel 36" (914) 19" (483)
Spacer Panel 35
1
/8" (892) 18
1
/16" (459)
Backer Panel 35
3
/4" (908) 18
11
/16" (475)
GRILLE W H
Overlay Panel 36" (914) 9
1
/4" (235)*
Spacer Panel 35
1
/8" (892) 8
5
/16" (211)
Backer Panel 35
3
/4" (908) 8
15
/16" (227)
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
23
Overlay Panel Dimensions
BUILT-IN REFRIGERATION
H
H
WW
H
H
WW
B
A
BI-36S, BI-42S, BI-42SID,
BI-48S, BI-48SID
BI-42SD, BI-48SD
MODEL BI-42UFD(ID)
REFRIGERATOR (2 PANELS) W H
Overlay Panels 20
7
/8" (530) 50
1
/8" (1273)
Spacer Panels 20" (508) 49
5
/16" (1253)
Backer Panels 20
5
/8" (524) 49
15
/16" (1268)
FREEZER W H
Overlay Panel 42" (1067) 19" (483)
Spacer Panel 41
1
/8" (1045) 18
1
/16" (459)
Backer Panel 41
3
/4" (1060) 18
11
/16" (475)
GRILLE W H
Overlay Panel 42" (1067) 9
1
/4" (235)*
Spacer Panel 41
1
/8" (1045) 8
5
/16" (211)
Backer Panel 41
3
/4" (1060) 8
15
/16" (227)
MODEL BI-36S
REFRIGERATOR W H
Overlay Panel 20
1
/16" (510) 69
3
/4" (1772)
Spacer Panel 19
3
/16" (487) 68
15
/16" (1751)
Backer Panel 19
13
/16" (503) 69
9
/16" (1767)
FREEZER W H
Overlay Panel 15
11
/16" (398) 69
3
/4" (1772)
Spacer Panel 14
13
/16" (376) 68
15
/16" (1751)
Backer Panel 15
7
/16" (392) 69
9
/16" (1767)
GRILLE W H
Overlay Panel 36" (914) 9
1
/4" (235)*
Spacer Panel 35
1
/8" (892) 8
5
/16" (211)
Backer Panel 35
3
/4" (908) 8
15
/16" (227)
MODEL BI-42S, BI-42SID, BI-42SD
REFRIGERATOR W H
Overlay Panel 25
1
/16" (637) 69
3
/4" (1772)
Spacer Panel 24
3
/16" (614) 68
15
/16" (1751)
Backer Panel 24
13
/16" (630) 69
9
/16" (1767)
FREEZER W H
Overlay Panel 16
11
/16" (424) 69
3
/4" (1772)
Spacer Panel 15
13
/16" (402) 68
15
/16" (1751)
Backer Panel 16
7
/16" (418) 69
9
/16" (1767)
GRILLE W H
Overlay Panel 42" (1067) 9
1
/4" (235)*
Spacer Panel 41
1
/8" (1045) 8
5
/16" (211)
Backer Panel 41
3
/4" (1060) 8
15
/16" (227)
BI-42SD W H
Dispenser Cut-Out 5
7
/8" (149) 12
7
/16" (316)
AB
Cut-Out Location 2" (51) 28
13
/16" (732)
MODEL BI-48S, BI-48SID, BI-48SD
REFRIGERATOR W H
Overlay Panel 28
3
/4" (730) 69
3
/4" (1772)
Spacer Panel 27
7
/8" (708) 68
15
/16" (1751)
Backer Panel 28
1
/2" (724) 69
9
/16" (1767)
FREEZER W H
Overlay Panel 19" (483) 69
3
/4" (1772)
Spacer Panel 18
1
/8" (460) 68
15
/16" (1751)
Backer Panel 18
3
/4" (476) 69
9
/16" (1767)
GRILLE W H
Overlay Panel 48" (1219) 9
1
/4" (235)*
Spacer Panel 47
1
/8" (1197) 8
5
/16" (211)
Backer Panel 47
3
/4" (1213) 8
15
/16" (227)
BI-48SD W H
Dispenser Cut-Out 5
7
/8" (149) 12
7
/16" (316)
AB
Cut-Out Location 2" (51) 28
13
/16" (732)
*Panel height may be increased by
7
/16" (11) to hide upper main
frame. For more information, refer to the built-in panel congurator
at subzero.com/trade/panels.
Grille panel dimensions are for standard 84"
(2134) overall unit
height. For 83" (2108) height, subtract 1" (25) from grille panel height
dimensions and for 88" (2235) height, add 4" (102). A specic panel
grille must be ordered for an 83" or 88" overall unit height.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
24
|
Sub-Zero Customer Care 800.222.7820
BUILT-IN REFRIGERATION
Flush Inset Panel Dimensions
MODEL BI-36R, BI-36RG, BI-36F
REFRIGERATOR / FREEZER W H
Flush Inset Panel 37" (940) 69
3
/4" (1772)
Spacer Panel 35
1
/8" (892) 68
15
/16" (1751)
Backer Panel 35
3
/4" (908) 69
9
/16" (1767)
GRILLE W H
Flush Inset Panel 37" (940) 9
1
/4" (235)
Spacer Panel 35
1
/8" (892) 8
5
/16" (211)
Backer Panel 35
3
/4" (908) 8
15
/16" (227)
BI-36RG A B
Stiles / Rails 5
3
/4" (146) 10
3
/8" (264)
MODEL BI-30U, BI-30UG
REFRIGERATOR W H
Flush Inset Panel 31" (787) 50
1
/8" (1273)
Spacer Panel 29
1
/8" (740) 49
5
/16" (1253)
Backer Panel 29
3
/4" (756) 49
15
/16" (1268)
FREEZER W H
Flush Inset Panel 31" (787) 19" (483)
Spacer Panel 29
1
/8" (740) 18
1
/16" (459)
Backer Panel 29
3
/4" (756) 18
11
/16" (475)
GRILLE W H
Flush Inset Panel 31" (787) 9
1
/4" (235)
Spacer Panel 29
1
/8" (740) 8
5
/16" (211)
Backer Panel 29
3
/4" (756) 8
15
/16" (227)
BI-30UG A B
Stiles / Rails 5
3
/4" (146) 5
1
/4" (133)
MODEL BI-36U(ID), BI-36UG
REFRIGERATOR W H
Flush Inset Panel 37" (940) 50
1
/8" (1273)
Spacer Panel 35
1
/8" (892) 49
5
/16" (1253)
Backer Panel 35
3
/4" (908) 49
15
/16" (1268)
FREEZER W H
Flush Inset Panel 37" (940) 19" (483)
Spacer Panel 35
1
/8" (892) 18
1
/16" (459)
Backer Panel 35
3
/4" (908) 18
11
/16" (475)
GRILLE W H
Flush Inset Panel 37" (940) 9
1
/4" (235)
Spacer Panel 35
1
/8" (892) 8
5
/16" (211)
Backer Panel 35
3
/4" (908) 8
15
/16" (227)
BI-36UG A B
Stiles / Rails 5
3
/4" (146) 5
1
/4" (133)
MODEL BI-36UFD(ID)
REFRIGERATOR (2 PANELS) W H
Flush Inset Panels 18
3
/8" (467) 50
1
/8" (1273)
Spacer Panels 17" (432) 49
5
/16" (1253)
Backer Panels 17
5
/8" (448) 49
15
/16" (1268)
FREEZER W H
Flush Inset Panel 37" (940) 19" (483)
Spacer Panel 35
1
/8" (892) 18
1
/16" (459)
Backer Panel 35
3
/4" (908) 18
11
/16" (475)
GRILLE W H
Flush Inset Panel 37" (940) 9
1
/4" (235)
Spacer Panel 35
1
/8" (892) 8
5
/16" (211)
Backer Panel 35
3
/4" (908) 8
15
/16" (227)
H
H
W
H
H
H
W
H
H
W
AA
A
B
H
H
H
W
AA
B
B
H
H
H
W
W W
BI-36R, BI-36F
BI-36RG
BI-30U, BI-36U(ID)
BI-30UG, BI-36UG
BI-36UFD(ID),
BI-42UFD(ID)
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
25
BUILT-IN REFRIGERATION
Flush Inset Panel Dimensions
MODEL BI-42UFD(ID)
REFRIGERATOR (2 PANELS) W H
Flush Inset Panels 21
3
/8" (543) 50
1
/8" (1273)
Spacer Panels 20" (508) 49
5
/16" (1253)
Backer Panels 20
5
/8" (524) 49
15
/16" (1268)
FREEZER W H
Flush Inset Panel 43" (1092) 19" (483)
Spacer Panel 41
1
/8" (1045) 18
1
/16" (459)
Backer Panel 41
3
/4" (1060) 18
11
/16" (475)
GRILLE W H
Flush Inset Panel 43" (1092) 9
1
/4" (235)
Spacer Panel 41
1
/8" (1045) 8
5
/16" (211)
Backer Panel 41
3
/4" (1060) 8
15
/16" (227)
MODEL BI-36S
REFRIGERATOR W H
Flush Inset Panel 20
9
/16" (522) 69
3
/4" (1772)
Spacer Panel 19
3
/16" (487) 68
15
/16" (1751)
Backer Panel 19
13
/16" (503) 69
9
/16" (1767)
FREEZER W H
Flush Inset Panel 16
3
/16" (411) 69
3
/4" (1772)
Spacer Panel 14
13
/16" (376) 68
15
/16" (1751)
Backer Panel 15
7
/16" (392) 69
9
/16" (1767)
GRILLE W H
Flush Inset Panel 37" (940) 9
1
/4" (235)
Spacer Panel 35
1
/8" (892) 8
5
/16" (211)
Backer Panel 35
3
/4" (908) 8
15
/16" (227)
MODEL BI-48S, BI-48SID, BI-48SD
REFRIGERATOR W H
Flush Inset Panel 29
1
/4" (743) 69
3
/4" (1772)
Spacer Panel 27
7
/8" (708) 68
15
/16" (1751)
Backer Panel 28
1
/2" (724) 69
9
/16" (1767)
FREEZER W H
Flush Inset Panel 19
1
/2" (495) 69
3
/4" (1772)
Spacer Panel 18
1
/8" (460) 68
15
/16" (1751)
Backer Panel 18
3
/4" (476) 69
9
/16" (1767)
GRILLE W H
Flush Inset Panel 49" (1245) 9
1
/4" (235)
Spacer Panel 47
1
/8" (1197) 8
5
/16" (211)
Backer Panel 47
3
/4" (1213) 8
15
/16" (227)
DISPENSER (BI-48SD) W H
Cut-Out 5
7
/8" (149) 12
7
/16" (316)
AB
Cut-Out Location 2" (51) 28
13
/16" (732)
Grille panel dimensions are for standard 84" (2134) overall unit
height. For 83"
(2108) height, subtract 1" (25) from grille panel height
dimensions and for 88" (2235) height, add 4" (102). A specic panel
grille must be ordered for an 83" or 88" overall unit height.
H
H
WW
H
H
WW
B
A
BI-36S, BI-42S, BI-42SID,
BI-48S, BI-48SID
BI-42SD, BI-48SD
MODEL BI-42S, BI-42SID, BI-42SD
REFRIGERATOR W H
Flush Inset Panel 25
9
/16" (649) 69
3
/4" (1772)
Spacer Panel 24
3
/16" (614) 68
15
/16" (1751)
Backer Panel 24
13
/16" (630) 69
9
/16" (1767)
FREEZER W H
Flush Inset Panel 17
3
/16" (437) 69
3
/4" (1772)
Spacer Panel 15
13
/16" (402) 68
15
/16" (1751)
Backer Panel 16
7
/16" (418) 69
9
/16" (1767)
GRILLE W H
Flush Inset Panel 43" (1092) 9
1
/4" (235)
Spacer Panel 41
1
/8" (1045) 8
5
/16" (211)
Backer Panel 41
3
/4" (1060) 8
15
/16" (227)
DISPENSER (BI-42SD) W H
Dispenser Cut-Out 5
7
/8" (149) 12
7
/16" (316)
AB
Cut-Out Location 2" (51) 28
13
/16" (732)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
26
|
Sub-Zero Customer Care 800.222.7820
BUILT-IN REFRIGERATION
Flush Inset Panels
PANEL OFFSET
The illustrations provide panel offsets and reveals for built-in
models in a ush inset application. Refer to the chart below
for reference to the illustrations.
PANEL OFFSET
ALL REFRIGERATOR / ALL FREEZER ILLUS
Door / Grille Sides A
Grille Top C
Grille Bottom / Door Top D
Door Bottom F
OVER-AND-UNDER ILLUS
Door (hinge) / Drawer / Grille Sides A
Doors (handle) Sides (French door only) B
Grille Top C
Grille Bottom / Door Top D
Door Bottom / Drawer Top E
Drawer Bottom F
SIDE-BY-SIDE ILLUS
Doors (hinge) / Grille Sides A
Doors (handle) Sides B
Grille Top C
Grille Bottom / Door Top D
Door Bottom F
5
/8"
(16)
5
/16" (8)
1
/2"
(13)
FLUSH INSET PANEL
SPACER
BACKER
DOOR / DRAWER / GRILLE
TOP VIEW
CABINETRY
1
/4" (6)
REVEAL
5
/16" (8)
1
/8" (3)
DOOR DOOR
TOP VIEW
Illus. A
Illus. B
1
/2"(13)
5
/16"
(8)
1
/8"
(3)
CABINETRY
GRILLE
SIDE VIEW
1
/2"(13)
3
/32"
(2)
5
/16"
(8)
5
/16"
(8)
5
/32"
(4)
GRILLE
DOOR
SIDE VIEW
Illus. C
Illus. D
5
/8"(16)
5
/32"
(4)
5
/16"
(8)
5
/16"
(8)
3
/32"
(2)
DOOR
DRAWER
SIDE VIEW
5
/16"
(8)
3
/32"
(2)
DOOR /
DRAWER
SIDE VIEW
Illus. E
Illus. F
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
27
BUILT-IN REFRIGERATION
Dual Installation
If two units are installed side by side, a dual installation kit
may be required. Installations without a custom ller strip
require a dual installation kit. If a dual installation kit is not
specied, a 2"
(51) ller strip is recommended between units.
A custom ller strip is required when installing two French
door or side-by-side models. Dual installations without a
ller strip can only be accomplished using two units with
opposite hinges. Refer to the illustrations below.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com. For ques-
tions regarding the installation, call Sub-Zero customer care
at 800-222-7820.
WITHOUT FILLER STRIP
FILLER STRIP
Opposite hinges.
Same side hinges.
For dual standard installations, panel dimensions are the
same as for single installations. Refer to the charts on pages
20–23. Panel dimensions and offsets for dual ush inset
installations are listed on the following pages.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
28
|
Sub-Zero Customer Care 800.222.7820
BUILT-IN REFRIGERATION
Dual Flush Inset Panel Dimensions
MODEL BI-36R, BI-36RG, BI-36F
REFRIGERATOR / FREEZER W H
Flush Inset Panel 36
1
/2" (927) 69
3
/4" (1772)
Spacer Panel 35
1
/8" (892) 68
15
/16" (1751)
Backer Panel 35
3
/4" (908) 69
9
/16" (1767)
GRILLE W H
Flush Inset Panel 36
1
/2" (927) 9
1
/4" (235)
Spacer Panel 35
1
/8" (892) 8
5
/16" (211)
Backer Panel 35
3
/4" (908) 8
15
/16" (227)
BI-36RG A B
Stiles / Rails 5
3
/4" (146) 10
3
/8" (264)
MODEL BI-30U, BI-30UG
REFRIGERATOR W H
Flush Inset Panel 30
1
/2" (775) 50
1
/8" (1273)
Spacer Panel 29
1
/8" (740) 49
5
/16" (1253)
Backer Panel 29
3
/4" (756) 49
15
/16" (1268)
FREEZER W H
Flush Inset Panel 30
1
/2" (775) 19" (483)
Spacer Panel 29
1
/8" (740) 18
1
/16" (459)
Backer Panel 29
3
/4" (756) 18
11
/16" (475)
GRILLE W H
Flush Inset Panel 30
1
/2" (775) 9
1
/4" (235)
Spacer Panel 29
1
/8" (740) 8
5
/16" (211)
Backer Panel 29
3
/4" (756) 8
15
/16" (227)
BI-30UG A B
Stiles / Rails 5
3
/4" (146) 5
1
/4" (133)
MODEL BI-36U(ID), BI-36UG
REFRIGERATOR W H
Flush Inset Panel 36
1
/2" (927) 50
1
/8" (1273)
Spacer Panel 35
1
/8" (892) 49
5
/16" (1253)
Backer Panel 35
3
/4" (908) 49
15
/16" (1268)
FREEZER W H
Flush Inset Panel 36
1
/2" (927) 19" (483)
Spacer Panel 35
1
/8" (892) 18
1
/16" (459)
Backer Panel 35
3
/4" (908) 18
11
/16" (475)
GRILLE W H
Flush Inset Panel 36
1
/2" (927) 9
1
/4" (235)
Spacer Panel 35
1
/8" (892) 8
5
/16" (211)
Backer Panel 35
3
/4" (908) 8
15
/16" (227)
BI-36UG A B
Stiles / Rails 5
3
/4" (146) 5
1
/4" (133)
Grille panel dimensions are for standard 84" (2134) overall unit
height. For 83" (2108) height, subtract 1" (25) from grille panel height
dimensions and for 88" (2235) height, add 4" (102). A specic panel
grille must be ordered for an 83" or 88" overall unit height. For dual
wide grilles, refer to page 30.
H
H
W
H
H
H
W
H
H
W
AA
A
B
H
H
H
W
AA
B
B
BI-36R, BI-36F
BI-36RG
BI-30U, BI-36U(ID)
BI-30UG, BI-36UG
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
29
BUILT-IN REFRIGERATION
Dual Installation
DUAL FLUSH INSET PANEL OFFSET
The illustrations provide panel offsets and reveals for built-in
models in a dual ush inset application. Refer to the chart
below for reference to the illustrations.
PANEL OFFSET
ALL REFRIGERATOR / ALL FREEZER ILLUS
Door (hinge) / Grille Sides A
Door (handle) Sides B
Grille Top C
Grille Bottom / Door Top D
Door Bottom F
OVER-AND-UNDER ILLUS
Door (hinge) / Drawer / Grille Sides A
Door (handle) Sides B
Grille Top C
Grille Bottom / Door Top D
Door Bottom / Drawer Top E
Drawer Bottom F
5
/8"
(16)
5
/16" (8)
1
/2"
(13)
FLUSH INSET PANEL
SPACER
BACKER
DOOR / DRAWER / GRILLE
TOP VIEW
CABINETRY
DUAL
TRIM
1
/4" (6)
REVEAL
5
/16" (8)
1
/8" (3)
DOOR DOOR
TOP VIEW
Illus. A
Illus. B
1
/2"(13)
5
/16"
(8)
1
/8"
(3)
CABINETRY
GRILLE
SIDE VIEW
1
/2"(13)
3
/32"
(2)
5
/16"
(8)
5
/16"
(8)
5
/32"
(4)
GRILLE
DOOR
SIDE VIEW
Illus. C
Illus. D
5
/8"(16)
5
/32"
(4)
5
/16"
(8)
5
/16"
(8)
3
/32"
(2)
DOOR
DRAWER
SIDE VIEW
5
/16"
(8)
3
/32"
(2)
DOOR /
DRAWER
SIDE VIEW
Illus. E
Illus. F
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
30
|
Sub-Zero Customer Care 800.222.7820
Dual Installation
DUAL WIDE GRILLE
A dual wide grille spans the entire width of both units in a
dual installation and is a part of a dual installation kit.
For overlay and ush inset panel dimensions for the dual
wide grille, refer to the charts below. Dimensions listed are
for a standard 84"
(2134) nished height.
DUAL WIDE GRILLE—OVERLAY
TWO 30" MODELS W H
Overlay Panel 60
1
/4" (1530) 9
1
/4" (235)
Spacer Panel 59
3
/8" (1508) 8
5
/16" (211)
Backer Panel 60" (1524) 8
15
/16" (227)
30" AND 36" MODEL W H
Overlay Panel 66
1
/4" (1683) 9
1
/4" (235)
Spacer Panel 65
3
/8" (1661) 8
5
/16" (211)
Backer Panel 66" (1676) 8
15
/16" (227)
TWO 36" MODELS W H
Overlay Panel 72
1
/4" (1835) 9
1
/4" (235)
Spacer Panel 71
3
/8" (1813) 8
5
/16" (211)
Backer Panel 72" (1829) 8
15
/16" (227)
DUAL WIDE GRILLE—FLUSH INSET
TWO 30" MODELS W H
Flush Inset Panel 61
1
/4" (1556) 9
1
/4" (235)
Spacer Panel 59
3
/8" (1508) 8
5
/16" (211)
Backer Panel 60" (1524) 8
15
/16" (227)
30" AND 36" MODEL W H
Flush Inset Panel 67
1
/4" (1708) 9
1
/4" (235)
Spacer Panel 65
3
/8" (1661) 8
5
/16" (211)
Backer Panel 66" (1676) 8
15
/16" (227)
TWO 36" MODELS W H
Flush Inset Panel 73
1
/4" (1861) 9
1
/4" (235)
Spacer Panel 71
3
/8" (1813) 8
5
/16" (211)
Backer Panel 72" (1829) 8
15
/16" (227)
BUILT-IN REFRIGERATION
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
31
Side Panel
The custom side panels must be a minimum of 24" (610)
deep and
1
/2" (13) thick. Routing will be necessary for the
side panel to t ush against the side of the unit. Refer to
the illustrations below.
When installing a built-in unit with a custom side panel, an
accessory kit is required. Stainless steel and white enamel
side panels are available through an authorized Sub-Zero
dealer. For local dealer information, visit the nd a show-
room section of our website, subzero.com.
84"
(2134)
24" (610)
ROUT TO
3
/16" (5)
(OVER-AND-UNDER
MODELS)
OPTIONAL
TOE KICK
CUT-OUT
4" (102)
20
1
/2"
(521)
5
3
/4"
(146)
1
7
/8"(48)
1" (25)
4
1
/4" (108)
ROUT TO
1
/8" (3)
FRONT
OF SIDE
PANEL
2
5
/8"
(67)
MAIN
FRAME
SIDE PANEL
ROUTING
1" (25)
1
7
/8" (48)
1
/8" (3)
1
/2" (13)
Side panel dimensions.
Routing detail.
BUILT-IN REFRIGERATION
Standard Handles
Optional stainless steel tubular and pro handles are avail-
able through an authorized Sub-Zero dealer. For local dealer
information, visit the nd a showroom section of our
website, subzero.com.
Refer to the chart below for standard handle lengths for
built-in models.
HANDLE LENGTH
BUILT-IN TUBULAR PRO
Full Door 63
7
/8" (1622) 45
3
/16" (1147)
Over-and-Under Door 44
1
/4" (1124) 37
1
/2" (952)
30" Drawer 24
5
/16" (633) 17
9
/16" (447)
36" Drawer 30
5
/16" (770) 23
5
/8" (600)
42" Drawer 36
5
/16" (922) 29
5
/8" (753)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
32
|
Sub-Zero Customer Care 800.222.7820
Framed Panels
FULL-SCALE TEMPLATE
BUILT-IN REFRIGERATION
OPTIONAL EXTENDED
FULL-LENGTH HANDLE
STANDARD
FULL-LENGTH HANDLE
1
/4" (6) FRAMED PANEL
DOOR
1"
(25)
3"
(76)
1
1
/4" (32) PANEL
1" (25) PANEL
1
/2" (13) PANEL
3
/4" (19) PANEL
2"
(51)
Framed panel thickness.
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
33
Overlay and Flush Inset Panels
FULL-SCALE TEMPLATE
Overlay and ush inset panels must be a minimum of
5
/8"
(16)
thick to support mounting the handle. Panel thickness
does not include backer and spacer panel. Mount handle
close to the opening edge of the door.
BUILT-IN REFRIGERATION
Overlay and ush inset panel thickness.
1
/4" (6) BACKER PANEL
DOOR
DEPTH OF TUBULAR
AND PRO HANDLES
1"
(25)
3"
(76)
1
1
/4" (32) PANEL
1" (25) PANEL
3
/4" (19) PANEL
2"
(51)
.10" (3) SPACER PANEL
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
34
|
Sub-Zero Customer Care 800.222.7820
BUILT-IN REFRIGERATION
23
7
/8" (606)
TO REAR OF UNIT
OVERALL WIDTH OF UNIT
1
1
/
4
"
(32)
1
1
/
2
"
(38)
1
3
/
4
"
(44)
0"
(0)
1"
(25)
2"
(51)
2
1
/
4
"
(57)
2
1
/
2
"
(63)
2
3
/
4
"
(70)
3"
(76)
3
1
/
4
"
(83)
3
1
/
2
"
(89)
1
/
4
"
(6)
1
/
2
"
(13)
3
/
4
"
(19)
3
/4" (19) THICK
OVERLAY PANEL
(TYPICAL)
1
/4" (6) BACKER
PANEL
1" (25) THICK
PANEL
1" (25)0"
SCALE
90° door opening (top view).
Overlay Application
FULL-SCALE TEMPLATE
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
35
BUILT-IN REFRIGERATION
1
1
/4" (32)
ASSUMES
3
/4" (19)
FLUSH INSET
PANEL
THICKNESS
2
3
/16" (56)
24" (610)
TO BACK WALL
3
/4" (19) THICK
FLUSH INSET PANEL
(TYPICAL)
1
/4" (6) BACKER
PANEL
1" (25) THICK
PANEL
1" (25)0"
SCALE
110° door opening (top view).
Flush Inset Application
FULL-SCALE TEMPLATE
For panels thicker than
3
/4" (19), a 90° door stop may be
required to prevent interference with adjacent cabinets.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
36
|
Sub-Zero Customer Care 800.222.7820
BUILT-IN REFRIGERATION
1
1
/4" (32)
FILLER STRIP
APPROX PROFILE OF
STAINLESS STEEL WRAPPED
DOOR AND HANDLE
DOOR
OPEN 110°
DOOR
CLOSED
Dual standard installation (top view).
Dual Standard Installation
FULL-SCALE TEMPLATE
Typical framed, overlay or stainless steel dual installation
with ller strip at maximum 110° door opening. Panel thick-
ness may require a 90° door stop.
1" (25)0"
SCALE
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
37
BUILT-IN REFRIGERATION
1
1
/2" (38)
1
/2" (13)
FILLER STRIP
PROFILE OF
3
/4" (19) FLUSH INSET PANEL
AND TUBULAR HANDLE
DOOR
CLOSED
DOOR
OPEN 110°
Dual ush inset installation (top view).
Dual Flush Inset Installation
FULL-SCALE TEMPLATE
Typical ush inset dual installation with ller strip at max-
imum 110° door opening. Panel thickness may require a 90°
door stop.
1" (25)0"
SCALE
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
subzero.com/specs
|
39
PRO 48 Refrigeration
Freshness nds unmistakable expression in the Sub-Zero
PRO 48. An 800-pound monument to food preservation—
equal parts sculpted metal design statement and culinary
secret weapon. Its vast interior, like its bold exterior, is
crafted of stainless steel. The PRO 48 is available with
or without a glass door and may be either built in or
freestanding.
PRO 48 MODELS
KEY FEATURES
• Can be used freestanding or installed as a standard or
ush built-in application.
• Stainless steel interior as well as exterior.
• Handles coordinate with handles of Wolf ranges.
• Dual refrigeration system enhanced with triple evapora-
tors allow independent control of storage conditions in
refrigerator cabinet and drawer compartments.
• Advanced water ltration system.
• Slide-out stainless steel bins t neatly under refrigerator
glass shelves.
• Exterior temperature display.
• Flip-up grille provides easy access for quick routine
maintenance.
• Star-K certied.
PRO 48 REFRIGERATION
648PRO
648PROG
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
40
|
Sub-Zero Customer Care 800.222.7820
SPECIFICATIONS
INTERIOR CAPACITY R CU FT (L) F CU FT (L)
648PRO, 648PROG 18.4 (521) 11.7 (331)
SHIPPING WEIGHT LB
(KG)
648PRO 860 (390)
648PROG 875 (397)
PRO 48 REFRIGERATION
84"
(2134)
4" (102)
HEIGHT DIMENSIONS ±
1
/2" (13)
25
7
/8" (657)
30
1
/2"
(775)
42
1
/8"
(1070)
30
3
/
16
"
(767)
14
1
/2"
(368)
23
7
/8"
(606)
30
3
/4"
(781)
21"
(533)
2
3
/8" (60)
48" (1219)
Overall Dimensions
PRO 48
Model 648PRO and 648PROG.
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
41
PRO 48 REFRIGERATION
H
OPENING
HEIGHT
FRONT VIEWSIDE VIEW
W
OPENING WIDTH
D
OPENING
DEPTH
TOP VIEW
Opening Dimensions
STANDARD AND FLUSH INSTALLATION
For standard built-in installations, the face frame of the unit
will extend 2"
(51) beyond cabinetry. For ush installations,
the front of the face frame will be ush with surrounding
cabinetry.
OPENING DIMENSIONS
INSTALLATION W H D
Standard 47
1
/2" (1206) 83
3
/4" (2127) 24" (610)
Flush 48" (1219) 84
1
/8" (2137) 26" (660)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
42
|
Sub-Zero Customer Care 800.222.7820
Electrical
The electrical supply should be located within the shaded
area shown in the illustration below. A separate circuit, ser-
vicing only this appliance is required. A ground fault circuit
interrupter (GFCI) is not recommended and may cause inter-
ruption of operation.
Installation must comply with all applicable electrical codes.
ELECTRICAL REQUIREMENTS
Electrical Supply 115 VAC, 60 Hz
Service 15 amp
Receptacle 3-prong grounding-type
Plumbing
The water supply line should be located within the shaded
area shown in the illustration below. The water supply line
should be connected to the house supply with an easily
accessible shut-off valve. Do not use self-piercing valves.
The water supply line must not interfere with installation of
the anti-tip bracket.
A reverse osmosis system can be used provided there is
constant water pressure of 35–120 psi
(2.4–8.3 bar) supplied
to the unit at all times. A copper line is not recommended
for this application.
Installation must comply with all applicable plumbing codes.
PLUMBING REQUIREMENTS
Water Supply
1
/4" OD copper, braided
stainless steel or PEX tubing
Pressure 35–120 psi (2.4–8.3 bar)
Excess Line for Connection 36" (914)
PRO 48 REFRIGERATION
75
1
/2" (1918)
FROM FLOOR
7"
(178)
E
6"
(152)
RIGHT SIDE
OF OPENING
Electrical supply location.
3" (76)
6"
(152)
5
3
/16"
(132)
RIGHT SIDE
OF OPENING
AREA EXTENDS
1
/2" (13)
FORWARD ON FLOOR
Water supply location.
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
43
PRO 48 REFRIGERATION
Standard Handles
Optional stainless steel tubular and pro handles are avail-
able through an authorized Sub-Zero dealer. For local dealer
information, visit the nd a showroom section of our
website, subzero.com.
Refer to the chart below for standard handle lengths for
PRO 48 models.
HANDLE LENGTH
PRO 48 TUBULAR PRO
Door NA 27
11
/16" (703)
Refrigerator Drawer NA 19
15
/16" (506)
Freezer Drawer NA 11
9
/16" (294)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
subzero.com/specs
|
45
INTEGRATED REFRIGERATION
KEY FEATURES
• Custom front panels and hardware allow for innite
design options.
• Point-of-use refrigeration that can be placed anywhere in
the home.
• Dual refrigeration; two compressors preserve food’s
goodness in self-contained compartments.
• Energy efcient; many models are ENERGY STAR
®
qualied.
• Star-K certied.
Integrated Refrigeration
With custom front panels and hardware, Sub-Zero invented
integrated columns, tall and drawer models that disappear
into the decor. Integrated units t ush with other cabinets,
making integrated refrigeration as practical and beautiful in
the master suite, bar or theatre room as in the kitchen.
INTEGRATED MODELS
IC-18FI
IC-24R,
IC-24FI
IC-30R(ID),
IC-30FI
IC-36R(ID)
IT-30R(ID),
IT-30FI, IT-30CI(ID)
ID-24R,
ID-24F(I)
ID-27R
ID-30R(P),
ID-30F(I), ID-30C(I)
ID-36R(P),
ID-36C(I)
IT-36R(ID),
IT-36CI(ID)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
46
|
Sub-Zero Customer Care 800.222.7820
INTEGRATED REFRIGERATION
Overall Dimensions
COLUMN
69
1
/2"
(1765)
W 24" (610)
84"*
(2134)
4
1
/2" (114)
3
5
/8" (92)
*83
1
/2" (2121) MIN TO 84
1
/2" (2146) MAX
A
B
1
3
/4" (45)
COLUMN
MODEL W A B
18" Column 18" (457) 2
1
/2" (64) 16
1
/2" (419)
24" Column 24" (610) 4" (102) 22
1
/2" (572)
30" Column 30" (762) 5
5
/8" (143) 28
1
/2" (724)
36" Column 36" (914) 7
1
/4" (184) 34
1
/2" (876)
Specications
INTERIOR CAPACITY
COLUMN R CU FT (L) F CU FT (L)
IC-18FI 8.4 (238)
IC-24R 12.9 (365)
IC-24FI 12.3 (348)
IC-30R(ID) 17.3 (490)
IC-30FI 15.3 (433)
IC-36R(ID) 21.4 (606)
TALL R CU FT
(L) F CU FT (L)
IT-30R(ID) 16.5 (467)
IT-30FI 15.1 (428)
IT-30CI(ID) 10.6 (300) 5.0 (142)
IT-36R(ID) 20.5 (580)
IT-36CI(ID) 13.3 (377) 6.4 (181)
DRAWER R CU FT
(L) F CU FT (L)
ID-24R 4.0 (113)
ID-24F(I) 3.8 (108)
ID-27R 4.6 (130)
ID-30R(P) 5.2 (147)
ID-30F(I) 4.9 (139)
ID-30C(I) 3.0 (85) 2.0 (57)
ID-36R(P) 6.6 (187)
ID-36C(I) 3.4 (96) 2.5 (71)
SHIPPING WEIGHT
COLUMN LB (KG)
18" Column 260 (118)
24" Column 340 (154)
30" Column 400 (181)
36" Column 440 (200)
TALL LB
(KG)
30" Tall 400 (181)
36" Tall 460 (209)
DRAWER LB
(KG)
24" Drawer 170 (77)
27" Drawer 190 (86)
30" Drawer 210 (95)
36" Drawer 250 (113)
IMPORTANT NOTE: Overall dimensions do not include panels
or handles. Dimensions will vary with panel thickness.
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
47
INTEGRATED REFRIGERATION
Overall Dimensions
TALL DRAWER
18
3
/8"
(467)
W 24" (610)
84"*
(2134)
10
9
/16"
(268)
44
7
/8"
(1140)
13
5
/16"
(338)
3
/8" (10)
4
1
/2" (114)
3
5
/8" (92)
*83
1
/2" (2121) MIN TO 84
1
/2" (2146) MAX
3
/8" (10)
A
B
1
3
/4" (45)
W
18
3
/8"
(467)
24" (610)
1
/4" (6)
34
1
/2"*
(876)
10
9
/16"
(268)
13
5
/16"
(338)
3
/8" (10)
3
5
/8" (92)
*34" (864) MIN TO 35" (889) MAX
TALL
MODEL W A B
30" Tall 30" (762) 5
5
/8" (143) 28
1
/2" (724)
36" Tall 36" (914) 7
1
/4" (184) 34
1
/2" (876)
DRAWER
MODEL W
24" Drawer 24" (610)
27" Drawer 27" (686)
30" Drawer 30" (762)
36" Drawer 36" (914)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
48
|
Sub-Zero Customer Care 800.222.7820
INTEGRATED REFRIGERATION
Opening Dimensions
INTEGRATED
25" (635)
OPENING
DEPTH
W
OPENING WIDTH
H
OPENING
HEIGHT
NOTE: 3
1
/2" (89) finished returns will be visible and should be finished to match cabinetry.
SIDE VIEW
TOP VIEW
FRONT VIEW
3
1
/2" (89)
FINISHED
RETURN
FRAMELESS CABINETRY
3
/4"
(19)
TYPICAL
3
1
/2" (89)
FINISHED
RETURN
FILLER
FRAMED CABINETRY
W W
OPENING DIMENSIONS
COLUMN AND TALL W H
18" Column 18" (457) 84" (2134)
24" Column 24" (610) 84" (2134)
30" Column and Tall 30" (762) 84" (2134)
36" Column and Tall 36" (914) 84" (2134)
DRAWER W H
24" Drawer 24" (610) 34
1
/2" (876)
27" Drawer 27" (686) 34
1
/2" (876)
30" Drawer 30" (762) 34
1
/2" (876)
36" Drawer 36" (914) 34
1
/2" (876)
The depth of each integrated model is 24" (610). Allow for
panel thickness when planning the nished opening depth.
A minimum 3
1
/2" (89) nished return is required on all sides
of the opening. Framed cabinets will require additional
nished ller material behind the face frame for a proper
installation. Refer to the illustration.
DUAL INSTALLATION
When installing two units side by side in a dual installa-
tion, the opening width is the width of the two units added
together. A dual installation kit will be required for this instal-
lation. If a dual installation kit is not specied, a minimum
2"
(51) ller strip is required between units.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com. For ques-
tions regarding the installation, call Sub-Zero customer care
at 800-222-7820.
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
49
INTEGRATED REFRIGERATION
Electrical
The electrical supply must be located within the shaded
area shown in the illustration and chart below. A separate
circuit, servicing only this appliance is required. A ground
fault circuit interrupter (GFCI) is not recommended and may
cause interruption of operation.
The electrical outlet must be positioned with the grounding
prong to the right of the thinner blades.
Installation must comply with all applicable electrical codes.
ELECTRICAL REQUIREMENTS
Electrical Supply 115 VAC, 60 Hz
Service 15 amp
Receptacle 3-prong grounding-type
ELECTRICAL SUPPLY LOCATION
MODEL A
18" Model 6" (152)
24" Model 9
1
/2" (241)
27" Model 11" (279)
30" Model 12
1
/2" (318)
36" Model 15
1
/2" (394)
A
1
/4" (6)
1
/4" (6)
4
1
/4"
(108)
4
1
/2"
(114)
FLOOR
LEFT SIDE
OF OPENING
Electrical supply location.
Plumbing
The water supply line should be located within the shaded
area shown in the illustration below. The water supply line
should be connected to the house supply with an easily
accessible shut-off valve. Do not use self-piercing valves.
The water supply line must not interfere with installation of
the anti-tip bracket.
A reverse osmosis system can be used provided there is
constant water pressure of 35–120 psi
(2.4–8.3 bar) supplied
to the unit at all times. A copper line is not recommended
for this application.
Installation must comply with all applicable plumbing codes.
PLUMBING REQUIREMENTS
Water Supply
1
/4" OD copper, braided
stainless steel or PEX tubing
Pressure 35–120 psi (2.4–8.3 bar)
Excess Line for Connection 36" (914)
WATER SUPPLY LOCATION
MODEL A
18" Model 3" (76)
24" Model 5
1
/2" (140)
30" Model 6" (152)
36" Model 9" (229)
3" (76)
6" (152)
RIGHT SIDE
OF OPENING
AREA EXTENDS
1
/2" (13)
FORWARD ON FLOOR
A
Water supply location.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
50
|
Sub-Zero Customer Care 800.222.7820
INTEGRATED REFRIGERATION
Custom Panels
For integrated models, custom door panels and handle
hardware must be provided. Refer to the panel requirements
chart and typical panel dimensions.
The thickness of the custom panel can vary. A minimum
5
/8" (16) thick panel is required, but the thickness can be
increased provided it does not exceed the weight limit. The
depth of each integrated model is 24"
(610). Allow for panel
thickness when planning the nished opening depth. Refer
to the full-scale template on page 53.
CAUTION
As reveals between cabinetry and the unit decrease,
severe nger pinching can occur while door is closing.
Finish all sides of custom panels. They will be visible when
the door/drawer is open.
D-style handles are recommended. Door handles must be
located near the edge of the panel opposite the hinge and
should be centered top to bottom. Drawer handles must
be located near the top edge of each panel. Stainless steel
tubular and pro handles are avail able through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com.
PANEL REQUIREMENTS
WEIGHT PER PANEL MAX
18" Column 45 lb (20 kg)
24" Column 60 lb (27 kg)
30" Column 75 lb (34 kg)
36" Column 75 lb (34 kg)
WEIGHT PER PANEL MAX
30" Tall (door) 50 lb (22 kg)
36" Tall (door) 60 lb (27 kg)
Drawer 15 lb (7 kg)
PANEL THICKNESS MIN
All Panels
5
/8" (16)
TYPICAL PANEL DIMENSIONS
Typical panel dimensions are based on an 84" (2134) nished
height for column and tall models and 34
1
/2" (876) for drawer
models, with a 4"
(102) toe kick and
1
/8" (3) reveals. Panel
dimensions must be adjusted accordingly for all other instal-
lations. Refer to the illustration for panel heights and the
chart below for panel widths.
PANEL WIDTH
MODEL W
18" Model 17
3
/4" (451)
24" Model 23
3
/4" (603)
27" Model 26
3
/4" (679)
30" Model 29
3
/4" (756)
36" Model 35
3
/4" (908)
DUAL INSTALLATION
For dual installations, refer to the illustration for panel
heights and the chart below for panel widths.
PANEL WIDTH
MODEL W
18" Model 17
13
/16" (452)
24" Model 23
13
/16" (605)
27" Model 26
13
/16" (681)
30" Model 29
13
/16" (757)
36" Model 35
13
/16" (910)
W
49
3
/8"
(1254)
13
9
/16"
(345)
16
11
/16"
(424)
WW
79
7
/8"
(2029)
Column
Tall
Drawer
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
51
INTEGRATED REFRIGERATION
Custom Panels
DOOR PANEL HEIGHT
The height of the custom door panel can extend beyond the
typical panel height, provided it does not exceed the weight
limit. Refer to the illustration below.
1
3
/4"
(45)
A DECORATIVE VALANCE
CANNOT EXTEND
BEYOND THIS PLANE
DOOR
PANEL
HINGE
24" (610)
TO BACK OF UNIT
84"
(2134)
1
/8" (3)
Upper valance—column and tall (side view).
TOE KICK CLEARANCE
The height of the toe kick area can extend beyond the
typical toe kick height, provided it does not exceed the
dimensions in the illustration below. Toe kick heights from
2"
(51) to 3
7
/8" (98) require a reduced toe kick accessory
available through an authorized Sub-Zero dealer. For local
dealer information, visit the nd a showroom section of our
website, subzero.com. For questions regarding the installa-
tion, call Sub-Zero customer care at 800-222-7820.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
24" (610)
TO BACK OF UNIT
VENTED
LOUVERS
HINGE
**
DOOR
PANEL
1
1
/8" (29)
MAX
TOE KICK
ADJUSTMENT
A DECORATIVE TOE KICK
CANNOT EXTEND
BEYOND THIS PLANE
2" (51)*
TO
6" (152)
FROM
FLOOR
*2" (51) to 3
7
/8" (98) requires sales accessory.
**Column models only.
Toe kick (side view).
52
|
Sub-Zero Customer Care 800.222.7820
INTEGRATED REFRIGERATION
Standard Handles
Optional stainless steel tubular and pro handles are avail-
able through an authorized Sub-Zero dealer. For local dealer
information, visit the nd a showroom section of our
website, subzero.com.
Refer to the chart below for standard handle lengths for
integrated models.
HANDLE LENGTH
INTEGRATED TUBULAR PRO
Column Door 50
1
/8" (1273) 48
3
/8" (1229)
Tall Door 33
1
/4" (845) 31
1
/2" (800)
24" Drawer 21
1
/4" (540) 19
1
/2" (495)
27" Drawer 24
1
/4" (616) 22
1
/2" (572)
30" Drawer 27
1
/4" (692) 25
1
/2" (648)
36" Drawer 33
1
/4" (845) 31
1
/2" (800)
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
53
INTEGRATED REFRIGERATION
DOOR CLOSED
3
/4" (19) PANEL
POTENTIAL
INTERFERENCE
ADJACENT
CABINETRY
DOOR OPEN
MAXIMUM 105°
POTENTIAL INTERFERENCE
1
/8" (3) REVEAL
3
/4" (19) PANEL
1" (25)0"
SCALE
Maximum door opening (top view).
Maximum Door Opening
FULL-SCALE TEMPLATE
As the panel width and/or depth increases, so does the
potential for panel interference. Interference may be
minimized by utilizing the 90° door stop.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
subzero.com/specs
|
55
WINE STORAGE
KEY FEATURES
• Integrated, overlay, ush inset and stainless steel design
options.
• Full-view glass door standard on all models.
• Discreet interior lighting with illuminated display rack for
prized bottles of wine.
• Two independent storage zones maintain temperature,
humidity and UV protection.
• Full extension, cherrywood-faced wine racks for easy
access.
• Wine racks accommodate 750 ml bottles, half-bottles
and magnums.
• Inventory system helps organize wine collection.
• Freestanding model 424FSG does not require panels or
surrounding cabinetry.
• Model IW-30R features two refrigerator storage drawers.
Wine Storage
Wine nds a well-deserved place of honor in a Sub-Zero
wine storage unit. Every detail is designed to ensure better
wine preservation. Cherrywood-faced racks, soft lighting,
custom cabinetry if desired—Sub-Zero helps make a wine
collection an element of beauty in the home.
315W
424G
424FSG
IW-18
IW-24
IW-30
IW-30R
WS-30
WINE STORAGE MODELS
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
56
|
Sub-Zero Customer Care 800.222.7820
WINE STORAGE
23
7
/8" (606) 24" (610)
34"
(864)
4" (102)
25
3
/8"
(645)
1
3
/4" (44)
15
1
/8" (384) 24" (610)
34
1
/16"
(865)
16
5
/8"
(422)
4" (102)
1
3
/4" (44)
Overall Dimensions
MODEL 315W
SPECIFICATIONS
STORAGE CAPACITY BOTTLES (750 ML)
315W 26
424G 46
424FSG 46
SHIPPING WEIGHT LB (KG)
315W 118 (54)
424G 195 (88)
424FSG 220 (100)
MODEL 424G
Overall dimensions are based on the stainless steel model.
Refer to page 77 for door clearance information.
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
57
WINE STORAGE
Opening Dimensions
MODEL 315W AND 424G
OPENING WIDTH
MODEL W
315W 15
1
/4" (387)
424G 24" (610)
DUAL OPENING WIDTH
MODELS W
Two 24" Models 48
1
/8" (1222)
Dual installation kit required.
W
OPENING WIDTH
34
1
/2"
(876)
OPENING
HEIGHT
24" (610)
OPENING
DEPTH
TOP VIEW
SIDE VIEW FRONT VIEW
25
3
/8"
(645)
1
3
/4" (44)
24
1
/4" (616) 24
5
/8" (625)
34
3
/16"
(868)
4" (102)
Overall Dimensions
MODEL 424FSG
Freestanding model 424FSG has a nished stainless steel
exterior and handles.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
58
|
Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Overall Dimensions
COLUMN
69
1
/2"
(1765)
W 24" (610)
84"*
(2134)
4
1
/2" (114)
3
5
/8" (92)
*83
1
/2" (2121) MIN TO 84
1
/2" (2146) MAX
A
B
1
3
/4" (45)
TALL
17
3
/4"
(451)
W 24" (610)
84"*
(2134)
10
9
/16"
(268)
44
7
/8"
(1140)
13
5
/16"
(338)
3
/8" (10)
4
1
/2" (114)
3
5
/8" (92)
*83
1
/2" (2121) MIN TO 84
1
/2" (2146) MAX
3
/8" (10)
A
B
1
3
/4" (45)
TALL
MODEL W A B
IW-30R 30" (762) 5
5
/8" (143) 28
1
/2" (724)
IMPORTANT NOTE: Overall dimensions do not include panels
or handles. Dimensions will vary with panel thickness.
COLUMN
MODEL W A B
IW-18 18" (457) 2
1
/2" (64) 16
1
/2" (419)
IW-24 24" (610) 4" (102) 22
1
/2" (572)
IW-30 30" (762) 5
5
/8" (143) 28
1
/2" (724)
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
59
WINE STORAGE
Specications
INTERIOR CAPACITY
COLUMN BOTTLES (750 ML)
IW-18 59
IW-24 102
IW-30 146
TALL R CU FT (L) BOTTLES (750 ML)
IW-30R 4.0 (113) 86
SHIPPING WEIGHT
COLUMN LB (KG)
IW-18 350 (159)
IW-24 410 (186)
IW-30 460 (209)
TALL LB
(KG)
IW-30R 490 (222)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
60
|
Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Opening Dimensions
INTEGRATED WINE STORAGE
OPENING DIMENSIONS
COLUMN AND TALL W H
18" Column 18" (457) 84" (2134)
24" Column 24" (610) 84" (2134)
30" Column and Tall 30" (762) 84" (2134)
The depth of each integrated (IW) model is 24" (610). Allow
for panel thickness when planning the nished opening
depth. A minimum 3
1
/2" (89) nished return is required on all
sides of the opening. Framed cabinets will require additional
nished ller material behind the face frame for a proper
installation. Refer to the illustration.
DUAL INSTALLATION
The unit can be installed next to an integrated refrigeration
model or another integrated wine storage model in a dual
installation. When installing two units side by side, the
opening width is the width of the two units added together.
A dual installation kit will be required for this installation. If a
dual installation kit is not specied, a minimum 2"
(51) ller
strip is required between units.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com. For ques-
tions regarding the installation, call Sub-Zero customer care
at 800-222-7820.
25" (635)
OPENING
DEPTH
W
OPENING WIDTH
H
OPENING
HEIGHT
NOTE: 3
1
/2" (89) finished returns will be visible and should be finished to match cabinetry.
SIDE VIEW
TOP VIEW
FRONT VIEW
3
1
/2" (89)
FINISHED
RETURN
FRAMELESS CABINETRY
3
/4"
(19)
TYPICAL
3
1
/2" (89)
FINISHED
RETURN
FILLER
FRAMED CABINETRY
W W
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
61
WINE STORAGE
Opening Dimensions
MODEL WS-30 STANDARD INSTALLATION
OPENING WIDTH
MODEL W
WS-30 29
1
/2" (749)
If an 83" (2108) grille height is specied, the opening height
must be decreased by
7
/8" (22). If an 88" (2235) grille height is
specied, the opening height must be increased by 4"
(102).
If two units are installed side by side, refer to page 63 for
dual standard installations.
30" (762)
84"
(2134)
4" (102)
73
3
/4"
(1873)
23
7
/8"
(606)
31
1
/4"
(796)
17"
(432)
23
7
/8" (606)
2
3
/8" (60)
HEIGHT DIMENSIONS ±
1
/2" (13)
26
3
/16" (665)
Overall Dimensions
MODEL WS-30
SPECIFICATIONS
STORAGE CAPACITY BOTTLES (750 ML)
WS-30 147
SHIPPING WEIGHT LB (KG)
WS-30 445 (202)
Overall dimensions are based on the stainless steel model.
For ush inset applications, add
1
/2" (13) to door clearance
dimensions.
83
3
/4"
(2127)
OPENING
HEIGHT
24" (610)
OPENING
DEPTH
NOTE: Shaded line represents profile of unit.
FRONT VIEWSIDE VIEW
TOP VIEW
W
OPENING WIDTH
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
62
|
Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Opening Dimensions
MODEL WS-30 FLUSH INSET INSTALLATION
FLUSH INSET WIDTH
MODEL W
WS-30 32" (813)
Dimensions assume a
3
/4" (19) panel thickness.
If an 83"
(2108) grille height is specied, the ush inset
height must be decreased by
7
/8" (22). If an 88" (2235) grille
height is specied, the ush inset height must be increased
by 4"
(102).
If two units are installed side by side, refer to page 64 for
dual ush inset installations.
84"
(2134)
FLUSH
INSET
HEIGHT
1
/4"
(6)
26
3
/16"
(665)
FLUSH
INSET
DEPTH
2
3
/16"
(56)
*3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry.
NOTE: Shaded line represents profile of unit with
3
/4" (19) panel.
FRONT VIEWSIDE VIEW
TOP VIEW
FINISHED
CLEATS*
1
1
/4"
(32)
W
FLUSH INSET WIDTH
4" (102)
1
1
/4"
(32)
2
3
/16"
(56)
3"
(76)*
TYPICAL
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
63
Opening Dimensions
MODEL WS-30 DUAL STANDARD INSTALLATION
83
3
/4"
(2127)
OPENING
HEIGHT
24" (610)
OPENING
DEPTH
NOTE: Shaded line represents profile of unit.
FRONT VIEWSIDE VIEW
TOP VIEW
W
OPENING WIDTH
DUAL OPENING WIDTH
MODELS W
WS-30 and 30" Built-In 59
3
/4" (1518)
WS-30 and 36" Built-In 65
3
/4" (1670)
A dual installation kit will be required for this installation.
WINE STORAGE
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
64
|
Sub-Zero Customer Care 800.222.7820
Opening Dimensions
MODEL WS-30 DUAL FLUSH INSET INSTALLATION
84"
(2134)
FLUSH
INSET
HEIGHT
1
/4"
(6)
26
3
/16"
(665)
FLUSH
INSET
DEPTH
2
3
/16"
(56)
*3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry.
NOTE: Shaded line represents profile of unit with
3
/4" (19) panel.
FRONT VIEWSIDE VIEW
TOP VIEW
FINISHED
CLEATS*
1
1
/4"
(32)
W
FLUSH INSET WIDTH
4" (102)
1
1
/4"
(32)
2
3
/16"
(56)
3"
(76)*
TYPICAL
DUAL FLUSH INSET WIDTH
MODELS W
WS-30 and 30" Built-In 62
1
/4" (1581)
WS-30 and 36" Built-In 68
1
/4" (1734)
Dimensions assume a
3
/4" (19) panel thickness. A dual instal-
lation kit will be required for this installation.
WINE STORAGE
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
65
ELECTRICAL SUPPLY LOCATION
INTEGRATED MODEL A
18" Model 6" (152)
24" Model 9
1
/2" (241)
30" Model 12
1
/2" (318)
Electrical
The electrical supply must be located within the shaded
area shown in the illustration for your specic model. For
integrated (IW) models, also refer to the chart. For model
315W, the electrical supply can be located anywhere on the
back wall of the opening. A separate circuit, servicing only
this appliance is required. A ground fault circuit interrupter
(GFCI) is not recommended and may cause interruption of
operation.
If the unit will be connected to a home security system,
allow 36"
(914) of excess wiring for proper connection.
IMPORTANT NOTE: For integrated (IW) models, the electrical
outlet must be positioned with the grounding prong to the
right of the thinner blades.
Installation must comply with all applicable electrical codes.
ELECTRICAL REQUIREMENTS
Electrical Supply 115 VAC, 60 Hz
Service 15 amp
Receptacle 3-prong grounding-type
WINE STORAGE
3" (76)
15
1
/2"
(394)
2"
(51)
LEFT SIDE
OF OPENING
FLOOR
75
1
/2" (1918)
FROM FLOOR
7"
(178)
E
6"
(152)
RIGHT SIDE
OF OPENING
Model 424G.
Model WS-30.
A
1
/4" (6)
1
/4" (6)
4
1
/4"
(108)
4
1
/2"
(114)
FLOOR
LEFT SIDE
OF OPENING
Integrated models.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
66
|
Sub-Zero Customer Care 800.222.7820
Custom Panel—315W and 424G
For models 315W and 424G, the custom door panel will
attach directly to the door frame with screws through a
series of pre-drilled holes.
Refer to the charts for panel requirements and dimensions.
PANEL REQUIREMENTS
WEIGHT PER PANEL MAX
315W 10 lb (5 kg)
424G 10 lb (5 kg)
PANEL THICKNESS MIN
All Panels
5
/8" (16)
OVERLAY PANEL DIMENSIONS
H
W
AA
A
A
315W, 424G
PANEL DIMENSIONS
MODEL W H
315W 15" (381) 30
1
/16" (764)
424G 23
3
/4" (603) 30
1
/16" (764)
STILES / RAILS (MIN) A
315W 2
1
/4" (57)
424G 2
1
/4" (57)
DOOR CLEARANCE
Models 315W and 424G can be installed ush with sur-
rounding cabinetry. Depending on the thickness of the
overlay door panel, it may be necessary to install the unit
1
/4" (6) beyond the front surface of adjacent cabinetry to
prevent interference when the door is opened to 145°. Refer
to the full-scale template on page 77.
Custom Panels
For framed, overlay, integrated and ush inset applications,
a custom door panel must be provided. Handle hardware
must also be provided for overlay, integrated and ush
inset applications. Refer to panel requirements and custom
panel dimensions charts for your specic model and design
application.
Do not install a solid panel on a glass door unit. A solid door
is available as a sales accessory (except model 315W and
WS-30) and must be installed if a solid panel is being speci-
ed. Service may be required to install the door. Contact an
authorized Sub-Zero dealer for more information. Overall
dimensions are the same for glass and solid door panels.
Finish all sides of the custom panels. They may be visible
when the door is open or through the window of glass door
models.
Model 424FSG has a nished stainless steel exterior that is
designed to be used in a freestanding application.
WINE STORAGE
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
67
WINE STORAGE
TYPICAL PANEL DIMENSIONS
W
49
3
/8"
(1254)
13
9
/16"
(345)
16
11
/16"
(424)
W
79
7
/8"
(2029)
Column
Tall
Custom Panel—Integrated
For integrated (IW) models, a custom door panel and handle
hardware must be provided. Refer to the panel requirements
chart and typical panel dimensions.
Do not install a solid panel on the glass door unit. A solid
door is available as a sales accessory through an authorized
Sub-Zero dealer.
The thickness of the custom panel can vary. A minimum
5
/8" (16) thick panel is required, but the thickness can be
increased provided it does not exceed the weight limit. The
depth of each integrated model is 24"
(610). Allow for panel
thickness when planning the nished opening depth. Refer
to the full-scale template on page 53.
CAUTION
As reveals between cabinetry and the unit decrease,
severe nger pinching can occur while door is closing.
Finish all sides of custom panels. They will be visible when
the door/drawer is open.
D-style handles are recommended. Door handles must be
located near the edge of the panel opposite the hinge and
should be centered top to bottom. Drawer handles must
be located near the top edge of each panel. Stainless steel
tubular and pro handles are avail able through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com.
PANEL REQUIREMENTS
STILES / RAILS WIDTH
Stiles 3
1
/4" (83)
Top Rail 7
3
/4" (197)
Bottom Rail 9
1
/2" (241)
Bottom Rail (IW-30R) 4
1
/2" (114)
WEIGHT PER PANEL MAX
Door Frame 35 lb (16 kg)
Door Frame (IW-30R) 25 lb (11 kg)
Drawer Panel 15 lb (7 kg)
PANEL THICKNESS MIN
All Panels
5
/8" (16)
Typical panel dimensions are based on an 84" (2134) nished
height, 4"
(102) toe kick and
1
/8" (3) reveals. Panel dimen-
sions must be adjusted accordingly for all other installations.
Refer to the illustration for panel heights and the chart below
for panel widths.
PANEL WIDTH
MODEL W
18" Model 17
3
/4" (451)
24" Model 23
3
/4" (603)
30" Model 29
3
/4" (756)
DUAL INSTALLATION
For dual installations, refer to the illustration for panel
heights and the chart below for panel widths.
PANEL WIDTH
MODEL W
18" Model 17
13
/16" (452)
24" Model 23
13
/16" (605)
30" Model 29
13
/16" (757)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
68
|
Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Custom Panel—Integrated
DOOR PANEL HEIGHT
The height of the custom door panel can extend beyond the
typical panel height, provided it does not exceed the weight
limit. Refer to the illustration below.
1
3
/4"
(45)
A DECORATIVE VALANCE
CANNOT EXTEND
BEYOND THIS PLANE
DOOR
PANEL
HINGE
24" (610)
TO BACK OF UNIT
84"
(2134)
1
/8" (3)
Upper valance (side view).
TOE KICK CLEARANCE
The height of the toe kick area can extend beyond the
typical toe kick height, provided it does not exceed the
dimensions in the illustration below. Toe kick heights from
2"
(51) to 3
7
/8" (98) require a reduced toe kick accessory
available through an authorized Sub-Zero dealer. For local
dealer information, visit the nd a showroom section of our
website, subzero.com. For questions regarding the installa-
tion, call Sub-Zero customer care at 800-222-7820.
24" (610)
TO BACK OF UNIT
VENTED
LOUVERS
HINGE
**
DOOR
PANEL
1
1
/8" (29)
MAX
TOE KICK
ADJUSTMENT
A DECORATIVE TOE KICK
CANNOT EXTEND
BEYOND THIS PLANE
2" (51)*
TO
6" (152)
FROM
FLOOR
*2" (51) to 3
7
/8" (98) requires sales accessory.
**Column models only.
Toe kick (side view).
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
69
WINE STORAGE
Custom Panel—WS-30
FRAMED PANEL
The framed application is an overlay model with framed
design features. It is not a separate model.
If the custom panel is thinner than
1
/4" (6), a ller material
must be added to achieve a proper t. If the panel is thicker
than
1
/4" (6), rout an edge around the panel or mount the
custom panel on a sheet of
1
/4" (6) thick material and insert
into the channel.
Routing, recessing and optional extended handles may be
required for nger clearance. Refer to the full-scale template
on page 78.
PANEL REQUIREMENTS
WEIGHT PER PANEL MAX
Door 75 lb (34 kg)
Grille (optional) 13 lb (6 kg)
PANEL THICKNESS MIN
Framed
1
/4" (6)
FRAMED PANEL DIMENSIONS
H
H
W
AA
A
A
WS-30
FRAMED PANEL
PANEL W H
Door 29
3
/4" (756) 69
9
/16" (1767)
Grille (optional) 29
3
/4" (756) 8
15
/16" (227)
STILES / RAILS A
Minimum 3
3
/16" (81)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
70
|
Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Custom Panel—WS-30
OVERLAY PANELS
Overlay panels are typically created by combining a
3
/4" (19)
custom panel, a .10"
(3) spacer panel and a
1
/4" (6) backer
panel. Refer to the illustrations below.
PANEL REQUIREMENTS
WEIGHT PER PANEL MAX
Door 75 lb (34 kg)
Grille 13 lb (6 kg)
PANEL THICKNESS MIN
Overlay
5
/8" (16)
1
/8"
(3)
CUSTOM PANEL
SPACER PANEL
BACKER PANEL
TRIM
5
/16" (8) min
DOOR FRAME
GLASS
1
/4" (6).10" (3)
CUSTOM
PANEL
SPACER
PANEL
BACKER
PANEL
3
/4"
(19)
typical
Panel assembly (cross section).
Panel assembly (rear view).
OVERLAY PANEL DIMENSIONS
H
H
W
AA
A
A
WS-30
OVERLAY PANELS
DOOR W H
Overlay Panel 30" (762) 69
3
/4" (1772)
Spacer Panel 29
1
/8" (740) 68
15
/16" (1751)
Backer Panel 29
3
/4" (756) 69
9
/16" (1767)
STILES / RAILS A
Minimum 3
1
/4" (83)
GRILLE W H
Overlay Panel 30" (762) 9
1
/4" (235)*
Spacer Panel 29
1
/8" (740) 8
5
/16" (211)
Backer Panel 29
3
/4" (756) 8
15
/16" (227)
*Panel height may be increased by
7
/16" (11) to hide upper main
frame. For more information, refer to the built-in panel congurator
at subzero.com/trade/panels.
Grille panel dimensions are for standard 84" (2134) overall unit
height. For 83" (2108) height, subtract 1" (25) from grille panel height
dimensions and for 88" (2235) height, add 4" (102). A specic panel
grille must be ordered for an 83" or 88" overall unit height.
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
71
WINE STORAGE
Custom Panel—WS-30
FLUSH INSET PANELS
The ush inset application is an overlay model with ush
inset panels. It is not a separate model.
The ush inset design allows custom panels to be installed
ush with adjacent cabinets. Similar to overlay, ush inset
panels are typically created by combining a
3
/4" (19) custom
panel, a .10"
(3) spacer panel and a
1
/4" (6) backer panel.
Refer to the illustrations for overlay panels on the previous
page.
For ush inset panels thicker than
3
/4" (19), a 90° door stop
may be required to prevent interference with adjacent cabi-
nets. Refer to the full-scale template on page 81.
PANEL REQUIREMENTS
WEIGHT PER PANEL MAX
Door 75 lb (34 kg)
Grille 13 lb (6 kg)
PANEL THICKNESS MIN
Flush Inset
5
/8" (16)
FLUSH INSET PANEL DIMENSIONS
H
H
W
AA
A
A
WS-30
FLUSH INSET PANELS
DOOR W H
Flush Inset Panel 31" (787) 69
3
/4" (1772)
Spacer Panel 29
1
/8" (740) 68
15
/16" (1751)
Backer Panel 29
3
/4" (756) 69
9
/16" (1767)
STILES / RAILS A
Minimum 3
3
/4" (95)
GRILLE W H
Flush Inset Panel 31" (787) 9
1
/4" (235)
Spacer Panel 29
1
/8" (740) 8
5
/16" (211)
Backer Panel 29
3
/4" (756) 8
15
/16" (227)
Grille panel dimensions are for standard 84" (2134) overall unit
height. For 83" (2108) height, subtract 1" (25) from grille panel height
dimensions and for 88" (2235) height, add 4" (102). A specic panel
grille must be ordered for an 83" or 88" overall unit height.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
72
|
Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Custom Panel—WS-30
FLUSH INSET PANEL OFFSET
The illustrations provide panel offsets and reveals for model
WS-30 in a ush inset application. Refer to the chart below
for reference to the illustrations.
PANEL OFFSET
FLUSH INSET ILLUS
Door / Grille Sides A
Grille Top B
Grille Bottom / Door Top C
Door Bottom D
5
/8"
(16)
5
/16" (8)
1
/2"
(13)
FLUSH INSET PANEL
SPACER
BACKER
DOOR / DRAWER / GRILLE
TOP VIEW
CABINETRY
1
/2"(13)
5
/16"
(8)
1
/8"
(3)
CABINETRY
GRILLE
SIDE VIEW
Illus. A
Illus. B
1
/2"(13)
3
/32"
(2)
5
/16"
(8)
5
/16"
(8)
5
/32"
(4)
GRILLE
DOOR
SIDE VIEW
5
/16"
(8)
3
/32"
(2)
DOOR /
DRAWER
SIDE VIEW
Illus. C
Illus. D
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
73
WINE STORAGE
DUAL FLUSH INSET PANEL DIMENSIONS
H
H
W
AA
A
A
WS-30
MODEL WS-30
DOOR W H
Flush Inset Panel 30
1
/2" (775) 69
3
/4" (1772)
Spacer Panel 29
1
/8" (740) 68
15
/16" (1751)
Backer Panel 29
3
/4" (756) 69
9
/16" (1767)
STILES / RAILS A
Minimum 3
3
/4" (95)
GRILLE W H
Flush Inset Panel 30
1
/2" (775) 9
1
/4" (235)
Spacer Panel 29
1
/8" (740) 8
5
/16" (211)
Backer Panel 29
3
/4" (756) 8
15
/16" (227)
Grille panel dimensions are for standard 84" (2134) overall unit
height. For 83" (2108) height, subtract 1" (25) from grille panel height
dimensions and for 88" (2235) height, add 4" (102). A specic panel
grille must be ordered for an 83" or 88" overall unit height.
Custom Panel—WS-30
DUAL INSTALLATIONS
If two models WS-30 or a model WS-30 and built-in unit are
installed side by side, a dual installation kit may be required.
Installations without a custom ller strip require a dual instal-
lation kit. If a dual installation kit is not specied, a 2"
(51)
ller strip is recommended between units. Dual installations
without a ller strip can only be accomplished using two
units with opposite hinges. Refer to the illustrations below.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com. For ques-
tions regarding the installation, call Sub-Zero customer care
at 800-222-7820.
For dual standard installations, panel dimensions are the
same as for single installations. Refer to the chart on page
70. Panel dimensions and offsets for dual ush inset instal-
lations are listed on the following pages.
WITHOUT FILLER STRIP
FILLER STRIP
Opposite hinges.
Same side hinges.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
74
|
Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Custom Panel—WS-30
DUAL FLUSH INSET PANEL OFFSET
The illustrations provide panel offsets and reveals for model
WS-30 in a dual ush inset application. Refer to the chart
below for reference to the illustrations.
PANEL OFFSET
DUAL FLUSH INSET ILLUS
Door (hinge) / Grille Sides A
Door (handle) Sides B
Grille Top C
Grille Bottom / Door Top D
Door Bottom E
5
/8"
(16)
5
/16" (8)
1
/2"
(13)
FLUSH INSET PANEL
SPACER
BACKER
DOOR / DRAWER / GRILLE
TOP VIEW
CABINETRY
DUAL
TRIM
1
/4" (6)
REVEAL
5
/16" (8)
1
/8" (3)
DOOR DOOR
TOP VIEW
Illus. A
Illus. B
1
/2"(13)
5
/16"
(8)
1
/8"
(3)
CABINETRY
GRILLE
SIDE VIEW
1
/2"(13)
3
/32"
(2)
5
/16"
(8)
5
/16"
(8)
5
/32"
(4)
GRILLE
DOOR
SIDE VIEW
Illus. C
Illus. D
5
/16"
(8)
3
/32"
(2)
DOOR /
DRAWER
SIDE VIEW
Illus. E
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
75
WINE STORAGE
Custom Panel—WS-30
SIDE PANEL
The custom side panel must be a minimum of 24" (610) deep
and
1
/2" (13) thick. Routing will be necessary for the side
panel to t ush against the side of the unit. Refer to the
illustrations below.
When installing model WS-30 with a custom side panel, an
accessory kit is required. Stainless steel and white enamel
side panels are available through an authorized Sub-Zero
dealer. For local dealer information, visit the nd a show-
room section of our website, subzero.com.
84"
(2134)
24" (610)
OPTIONAL
TOE KICK
CUT-OUT
4" (102)
1
7
/8"(48)
1" (25)
ROUT TO
1
/8" (3)
FRONT
OF SIDE
PANEL
2
5
/8"
(67)
MAIN
FRAME
SIDE PANEL
ROUTING
1" (25)
1
7
/8" (48)
1
/8" (3)
1
/2" (13)
Side panel dimensions.
Routing detail.
Standard Handles
Optional stainless steel tubular and pro handles are avail-
able through an authorized Sub-Zero dealer. For local dealer
information, visit the nd a showroom section of our
website, subzero.com.
Refer to the chart below for standard handle lengths for
wine storage models.
HANDLE LENGTH
WINE STORAGE TUBULAR PRO
315W, 424G Door 24
1
/4" (616) 22
1
/4" (572)
IW-18, IW-24, IW-30 Door 50
1
/8" (1273) 48
3
/8" (1229)
IW-30R Door 33
1
/4" (845) 31
1
/2" (800)
IW-30R Drawer 24
1
/4" (616) 22
1
/2" (572)
WS-30 Door 63
7
/8" (1622) 45
3
/16" (1147)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
76
|
Sub-Zero Customer Care 800.222.7820
Wine Rack Wood Facing
FULL-SCALE TEMPLATE
The natural cherrywood facing on wine storage racks can
be stained and sealed, or replaced with wood more comple-
mentary to surrounding cabinetry. Refer to the full-scale
template below for prole dimensions of the wood facing
and the chart for width.
WINE STORAGE
1
1
/2"
(38)
27
/32"
(21)
7
/64" (3)
5
/64" (2)
23
/64"
(9)
23
/64"
(9)
1
/2"
(13)
1
1
/16"
(27)
1
/4"
(6)
5
/8"
(16)
9
/16"
(14)
5
/64" (2)
9
/16"
(14)
7
/64" (3)
315W, 424G,
424FSG, WS-30
IW-18, IW-24,
IW-30, IW-30R
Wine rack wood facing prole.
WOOD FACING WIDTH
MODEL WIDTH
315W 10
15
/16" (278)
424G, 424FSG 19
1
/2" (495)
IW-18 11
5
/8" (295)
IW-24 17
5
/8" (448)
IW-30, IW-30R 23
5
/8" (600)
WS-30 24
9
/16" (624)
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
77
WINE STORAGE
DOOR CLOSED
UNDERCOUNTER
UNIT
ADJACENT
CABINETRY
3
/4" (19) DOOR PANEL
1
/2"
(13)
1
/8" (3)
1
/4" (6)
HINGE AT 145°
OPENING
(DOOR OPENS PAST 145°)
1" (25)0"
SCALE
145° door opening (top view).
Door Clearance—315W and 424G
FULL-SCALE TEMPLATE
To allow for a 145° door opening, the unit should extend
a minimum of
1
/4" (6) beyond the front surface of adja-
cent cabinetry. The unit can be installed ush, however,
there is potential for interference with the panel if the
door is opened past 90°.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
78
|
Sub-Zero Customer Care 800.222.7820
Framed Panel—WS-30
FULL-SCALE TEMPLATE
OPTIONAL EXTENDED
FULL-LENGTH HANDLE
STANDARD
FULL-LENGTH HANDLE
1
/4" (6) FRAMED PANEL
DOOR
1"
(25)
3"
(76)
1
1
/4" (32) PANEL
1" (25) PANEL
1
/2" (13) PANEL
3
/4" (19) PANEL
2"
(51)
Framed panel thickness.
WINE STORAGE
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
79
Overlay and Flush Inset Panels—WS-30
FULL-SCALE TEMPLATE
Overlay and ush inset panels must be a minimum of
5
/8"
(16)
thick to support mounting the handle. Panel thickness
does not include backer and spacer panel. Mount handle
close to the opening edge of the door.
Overlay and ush inset panel thickness.
1
/4" (6) BACKER PANEL
DOOR
DEPTH OF TUBULAR
AND PRO HANDLES
1"
(25)
3"
(76)
1
1
/4" (32) PANEL
1" (25) PANEL
3
/4" (19) PANEL
2"
(51)
.10" (3) SPACER PANEL
WINE STORAGE
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
80
|
Sub-Zero Customer Care 800.222.7820
WINE STORAGE
23
7
/8" (606)
TO REAR OF UNIT
OVERALL WIDTH OF UNIT
1
1
/
4
"
(32)
1
1
/
2
"
(38)
1
3
/
4
"
(44)
0"
(0)
1"
(25)
2"
(51)
2
1
/
4
"
(57)
2
1
/
2
"
(63)
2
3
/
4
"
(70)
3"
(76)
3
1
/
4
"
(83)
3
1
/
2
"
(89)
1
/
4
"
(6)
1
/
2
"
(13)
3
/
4
"
(19)
3
/4" (19) THICK
OVERLAY PANEL
(TYPICAL)
1
/4" (6) BACKER
PANEL
1" (25) THICK
PANEL
1" (25)0"
SCALE
90° door opening (top view).
Overlay Application—WS-30
FULL-SCALE TEMPLATE
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
81
WINE STORAGE
1
1
/4" (32)
ASSUMES
3
/4" (19)
FLUSH INSET
PANEL
THICKNESS
2
3
/16" (56)
24" (610)
TO BACK WALL
3
/4" (19) THICK
FLUSH INSET PANEL
(TYPICAL)
1
/4" (6) BACKER
PANEL
1" (25) THICK
PANEL
1" (25)0"
SCALE
110° door opening (top view).
Flush Inset Application—WS-30
FULL-SCALE TEMPLATE
For panels thicker than
3
/4" (19), a 90° door stop may be
required to prevent interference with adjacent cabinets.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
82
|
Sub-Zero Customer Care 800.222.7820
WINE STORAGE
1
1
/4" (32)
FILLER STRIP
APPROX PROFILE OF
STAINLESS STEEL WRAPPED
DOOR AND HANDLE
DOOR
OPEN 110°
DOOR
CLOSED
Dual standard installation (top view).
Dual Standard Installation—WS-30
FULL-SCALE TEMPLATE
Typical framed, overlay or stainless steel dual installation
with ller strip at maximum 110° door opening. Panel thick-
ness may require a 90° door stop.
1" (25)0"
SCALE
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
83
WINE STORAGE
1
1
/2" (38)
1
/2" (13)
FILLER STRIP
PROFILE OF
3
/4" (19) FLUSH INSET PANEL
AND TUBULAR HANDLE
DOOR
CLOSED
DOOR
OPEN 110°
Dual ush inset installation (top view).
Dual Flush Inset Installation—WS-30
FULL-SCALE TEMPLATE
Typical ush inset dual installation with ller strip at max-
imum 110° door opening. Panel thickness may require a 90°
door stop.
1" (25)0"
SCALE
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
subzero.com/specs
|
85
Undercounter Refrigeration
Sub-Zero undercounter refrigeration is a helpful addition to a
master suite, bar, home ofce or media room. In the kitchen,
a high-volume ice machine is a must for entertaining. The
design exibility of these compact yet roomy units makes
them all the more welcome in any room or outdoor kitchen.
They are ready to be tted with a custom cabinet panel or
can be ordered with a stainless steel panel.
UNDERCOUNTER MODELS
KEY FEATURES
• Overlay and stainless steel design applications.
• Handle options coordinate with handles of Wolf cooking
products.
• Models UC-24RO and UC-15I(P)O are UL approved for
outdoor use.
• Energy efcient; many models are ENERGY STAR
®
qualied.
• Star-K certied (except ice machine models).
UNDERCOUNTER REFRIGERATION
UC-24R
UC-24BG
UC-24C(I)
UC-24RO
UC-15I(P)
UC-15I(P)O
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
86
|
Sub-Zero Customer Care 800.222.7820
UNDERCOUNTER REFRIGERATION
23
7
/8" (606)
26" (660) 8"
(203)
24" (610)
34"
(864)
25
3
/8"
(645)
4" (102)
18"
(457)
14
3
/4" (375) 23" (584)
33
5
/8"
(854)
4" (102)
6"
(152)
Overall Dimensions
UNDERCOUNTER
SPECIFICATIONS
INTERIOR CAPACITY R CU FT (L) F CU FT (L)
UC-24R, UC-24RO 5.7 (161)
UC-24BG 6.0 (170)
UC-24C(I) 3.6 (102) 1.1 (31)
SHIPPING WEIGHT LB
(KG)
24" Model 130 (59)
Refer to page 91 for door clearance information.
ICE MACHINE
SPECIFICATIONS
STORAGE CAPACITY LB (KG)
UC-15I(P), UC-15I(P)O 26 (12)
SHIPPING WEIGHT LB
(KG)
Ice Machine 100 (45)
Model UC-15I overall dimensions do not include panel or
handle.
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
87
UNDERCOUNTER REFRIGERATION
DUAL INSTALLATION
If two units are installed side by side, a dual installation kit
may be required. Installations without a custom ller strip
require a dual installation kit. If a dual installation kit is not
specied, a 2"
(51) ller strip is recommended between units.
Dual installations without a ller strip can only be accom-
plished using two units with opposite hinges. Refer to the
illustrations below.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com. For ques-
tions regarding the installation, call Sub-Zero customer care
at 800-222-7820.
W
OPENING WIDTH
34
1
/2"
(876)
OPENING
HEIGHT
24" (610)
OPENING
DEPTH
TOP VIEW
SIDE VIEW FRONT VIEW
Opening Dimensions
UNDERCOUNTER
OPENING WIDTH
MODEL W
24" Model 24" (610)
Ice Machine 15
1
/4" (387)
DUAL OPENING WIDTH
MODELS W
Two 24" Models 48
1
/8" (1222)
Dual installation kit required.
WITHOUT FILLER STRIP
FILLER STRIP
Opposite hinges.
Same side hinges.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
88
|
Sub-Zero Customer Care 800.222.7820
UNDERCOUNTER REFRIGERATION
Electrical
The electrical supply should be located within the shaded
area shown in the illustration. For ice machine models, it is
recommended that electrical supply be placed in an adja-
cent cabinet. A separate circuit, servicing only this appli-
ance is required.
IMPORTANT NOTE: For outdoor models UC-24RO and
UC-15I(P)O, a ground fault circuit interrupter (GFCI) is
required to reduce the risk of electrical shock. A GFCI is not
recommended for use with other undercounter models and
may cause interruption of operation.
Installation must comply with all applicable electrical codes.
3" (76)
15
1
/2"
(394)
2"
(51)
LEFT SIDE
OF OPENING
FLOOR
Electrical supply location.
ELECTRICAL REQUIREMENTS
Electrical Supply 115 VAC, 60 Hz
Service 15 amp
Receptacle 3-prong grounding-type
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
89
UNDERCOUNTER REFRIGERATION
Plumbing
The water supply line should be located within the shaded
area shown in the illustrations below. The water supply line
should be connected to the house supply with an easily
accessible shut-off valve between the supply and the
unit. Do not use self-piercing valves. A saddle valve kit is
avail able through an authorized Sub-Zero dealer. For local
dealer information, visit the nd a showroom section of our
website, subzero.com.
IMPORTANT NOTE: A reverse osmosis system can be used
provided there is constant water pressure as indicated in the
chart below at all times. A copper line is not recommended
for this application.
PLUMBING REQUIREMENTS
Water Supply
1
/4" OD copper, braided
stainless steel or PEX tubing
Pressure (UC-24CI) 20–100 psi (1.4–6.9 bar)
Pressure (UC-15I) 20–80 psi (1.4–5.5 bar)
Excess Line for Connection 36" (914)
3" (76)
15
1
/2"
(394)
2"
(51)
LEFT SIDE
OF OPENING
AREA EXTENDS
1
/2" (13)
FORWARD ON FLOOR
LOCATION OF
WATER LINE
8"
(203)
1
/2"
(
13
)
TOP VIEW
Model UC-24CI.
Ice machine.
ICE MACHINE DRAIN
Ice machine models can be ordered with or without a drain
pump. Models without a pump will drain water by gravity.
A drain must be installed.
The drain and inlet water tubes must be plumbed before
connecting to the ice machine. For the gravity drain, hori-
zontal drain lines must have a
1
/4" (6) per 12" (305) fall. An air
gap will likely be required between the unit and drain.
A stand pipe with a trap below is acceptable for the drain.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
90
|
Sub-Zero Customer Care 800.222.7820
UNDERCOUNTER REFRIGERATION
MODEL UC-24BG
For model UC-24BG, the custom door panel will attach
directly to the door frame with screws through a series of
pre-drilled holes. Refer to the illustration below.
Do not install a solid panel on a glass door unit. A solid door
is available as a sales accessory and must be installed if a
solid panel is being specied. Service may be required to
install the door. Contact an authorized Sub-Zero dealer for
more information. Overall dimensions are the same for glass
and solid door panels.
Custom Panel
For overlay undercounter models, custom door panels and
handle hardware must be provided. Refer to the charts for
panel requirements and dimensions.
Finish all sides of the custom panels. They may be visible
when the door is open or through the window of glass door
models.
PANEL REQUIREMENTS
WEIGHT PER PANEL MAX
UC-24R, UC-24C(I) 20 lb (9 kg)
UC-24BG 10 lb (5 kg)
UC-15I(P) 15 lb (7 kg)
PANEL THICKNESS MIN
All Panels
5
/8" (16)
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
91
UNDERCOUNTER REFRIGERATION
Custom Panel
OVERLAY PANEL DIMENSIONS
H
W
H
W
AA
A
A
PANEL DIMENSIONS
MODEL W H
24" Model 23
3
/4" (603) 30
1
/16" (764)
Ice Machine 15" (381) 30
3
/8" (772)
STILES / RAILS (MIN) A
UC-24BG 2
1
/4" (57)
DOOR CLEARANCE
Undercounter models can be installed ush with surround-
ing cabinetry. Depending on the thickness of the custom
door panel, it may be necessary to install the unit
1
/4" (6)
beyond the front surface of adjacent cabinetry to prevent
interference when the door is opened to 145°. Refer to the
full-scale template on page 93.
UC-24R, UC-24C(I),
UC-15I(P)
UC-24BG
Standard Handles
Optional stainless steel tubular and pro handles are avail-
able through an authorized Sub-Zero dealer. For local dealer
information, visit the nd a showroom section of our
website, subzero.com.
Refer to the chart below for standard handle lengths for
undercounter models.
HANDLE LENGTH
UNDERCOUNTER TUBULAR PRO
Door 24
1
/4" (616) 22
1
/2" (572)
Outdoor Door NA 15
11
/16" (399)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
92
|
Sub-Zero Customer Care 800.222.7820
UNDERCOUNTER REFRIGERATION
WOOD FACING WIDTH
MODEL WIDTH
UC-24BG, UC-24C(I) 19
1
/2" (495)
Sub-Zero, Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, and Ingredients are registered trademarks and service
marks of Sub-Zero, Inc. Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf Appliance, Inc.
All other trademarks or registered trademarks are property of their respective owners in the United States and other countries.
Wine Rack Wood Facing
FULL-SCALE TEMPLATE
The natural cherrywood facing on wine storage racks can
be stained and sealed, or replaced with wood more comple-
mentary to surrounding cabinetry. Refer to the full-scale
template below for prole dimensions of the wood facing
and the chart for widths.
1
1
/2"
(38)
27
/32"
(21)
7
/64" (3)
5
/64" (2)
23
/64"
(9)
23
/64"
(9)
1
/2"
(13)
1
1
/16"
(27)
1
/4"
(6)
5
/8"
(16)
9
/16"
(14)
5
/64" (2)
9
/16"
(14)
7
/64" (3)
315W, 424G,
424FSG, WS-30
IW-18, IW-24,
IW-30, IW-30R
Wine rack wood facing prole.
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN
subzero.com/specs
|
93
UNDERCOUNTER REFRIGERATION
DOOR CLOSED
UNDERCOUNTER
UNIT
ADJACENT
CABINETRY
3
/4" (19) DOOR PANEL
1
/2"
(13)
1
/8" (3)
1
/4" (6)
HINGE AT 145°
OPENING
(DOOR OPENS PAST 145°)
1" (25)0"
SCALE
145° door opening (top view).
Door Clearance—Undercounter
FULL-SCALE TEMPLATE
To allow for a 145° door opening, the unit should extend
a minimum of
1
/4" (6) beyond the front surface of adja-
cent cabinetry. The unit can be installed ush, however,
there is potential for interference with the panel if the
door is opened past 90°.
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
Sub-Zero Residential Limited Warranty
FOR RESIDENTIAL USE
FULL TWO YEAR WARRANTY*
For two years from the date of original installation, this Sub-Zero product warranty covers all parts and
labor to repair or replace, under normal residential use, any part of the product that proves to be defec-
tive in materials or workmanship. All service provided by Sub-Zero under the above warranty must be
performed by Sub-Zero factory certied service, unless otherwise specied by Sub-Zero, Inc. Service will
be provided during normal business hours.
FULL FIVE YEAR SEALED SYSTEM WARRANTY
For ve years from the date of original installation, this Sub-Zero product warranty covers all parts and
labor to repair or replace, under normal residential use, these parts that prove to be defective in materials
or workmanship: compressor, condenser, evaporator, drier and all connecting tubing. All service provided
by Sub-Zero under the above warranty must be performed by Sub-Zero factory certied service, unless
otherwise specied by Sub-Zero, Inc. Service will be provided during normal business hours.
LIMITED TWELVE YEAR SEALED SYSTEM WARRANTY
For twelve years from the date of original installation, Sub-Zero will repair or replace the following parts
that prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier and all
connecting tubing. If the owner uses Sub-Zero factory certied service, the service provider will repair or
replace these parts with the owner paying for all other costs, including labor. If the owner uses non-certi-
ed service, the owner must contact Sub-Zero, Inc. (using the information below) to receive repaired or
replacement parts. Sub-Zero will not reimburse the owner for parts purchased from non-certied service
or other sources.
TERMS APPLICABLE TO EACH WARRANTY
The warranty applies only to products installed for normal residential use. The warranty applies only to
products installed in any one of the fty states of the United States, the District of Columbia or the ten
provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by
negligence, accident or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO, INC.
WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION OF
LAW. SUB-ZERO, INC. WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
ARISING FROM THE BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS,
IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specic legal rights and you may also
have other legal rights that vary from state to state.
To receive parts and/or service and the name of Sub-Zero factory certied service nearest you, contact
Sub-Zero, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website,
subzero.com, email us at [email protected] or call 800-222-7820.
*Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited
60-day parts and labor warranty for cosmetic defects.
*Replacement water lters and air purication cartridges are not covered by the product warranty.
Sub-Zero Outdoor Limited Warranty*
FOR RESIDENTIAL USE
FULL ONE YEAR WARRANTY**
For one year from the date of original installation, this Sub-Zero product warranty covers all parts and labor
to repair or replace, under normal residential use, any part of the product that proves to be defective in
materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed
by Sub-Zero factory certied service, unless otherwise specied by Sub-Zero, Inc. Service will be provided
during normal business hours.
FULL FIVE YEAR SEALED SYSTEM WARRANTY
For ve years from the date of original installation, this Sub-Zero product warranty covers all parts and
labor to repair or replace, under normal residential use, these parts that prove to be defective in materials
or workmanship: compressor, condenser, evaporator, drier and all connecting tubing. All service provided
by Sub-Zero under the above warranty must be performed by Sub-Zero factory certied service, unless
otherwise specied by Sub-Zero, Inc. Service will be provided during normal business hours.
TERMS APPLICABLE TO EACH WARRANTY
The warranty applies only to products installed for normal residential use. The warranty applies only to
products installed in any one of the fty states of the United States, the District of Columbia or the ten
provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by
negligence, accident or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO, INC.
WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION OF
LAW. SUB-ZERO, INC. WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
ARISING FROM THE BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS,
IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specic legal rights and you may also
have other legal rights that vary from state to state.
To receive parts and/or service and the name of Sub-Zero factory certied service nearest you, contact
Sub-Zero, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website,
subzero.com, email us at [email protected] or call 800-222-7820.
*Product must be approved for outdoor use, designated by model and serial number.
**Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited
60-day parts and labor warranty for cosmetic defects.
**Replacement water lters are not covered by the product warranty.
SUB-ZERO, INC. P.O. BOX 44848 MADISON, WI 53744 SUBZERO.COM 800.222.7820
