Loading ...
Loading ...
Loading ...
6
Cleaning and Maintenance
1. Always turn off the appliance, unplug it, and allow it to cool down before cleaning.
2. You can easily remove any excess oils or crumbs without disassembling the appliance.
NOTE: NEVER SUBMERGE THE APPLIANCE IN WATER OR PLACE IT IN THE DISHWASHER.
3. For best results and preserve the non-stick coating longer, use nylon, plastic, wooden or
rubberutensils.
4. Use a soft cloth on the heating plates and occasionally a metal polish intended for stainless steel on
theouter housing. Never use abrasive scouring pads or steel wool.
5. If there is hardened batter on the plates, pour a little oil and let it sit for about 5-7 minutes.
You can then wipe clean with a paper towel.
6. Do not use the Bubble Wafe Maker for anything other than making wafes.
This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it
yourself. Any servicing requiring disassembly other than cleaning must be performed by a qualied
appliance repair technician.
Steps For Stain Removal and Proper Care of Your Non-Stick Coating
1. Identify stained areas on the cooking surface and sprinkle some baking soda on the stains.
2. Moisten the baking soda to get a paste like texture by adding some water.
3. Let the paste stand for a few minutes on the stains (not more than an hour)
4. Rub with a soft damp cloth or lightly scrub with a plastic scouring pad, wipe clean and dry
thoroughly.
NOTE: Do not rub vigorously when using a plastic scouring pad and NEVER use a metal scouring
pad asthis may damage the non-stick coating.
5. Repeat the cycle once again if necessary. The performance and non-stick property of the coating
will not be affected due to stains.
Storing Instructions
1. Unplug unit and allow to cool. Never store the Bubble Wafe Maker while it is hot or still plugged in.
2. Clean the Bubble Wafe Maker before storing.
3. Store the clean Bubble Wafe Maker in its box vertically or in a clean, dry place (See Figure 3).
Figure 3
17175-17227_BELLA_BubbleWaffleMaker_IM_r3.indd 617175-17227_BELLA_BubbleWaffleMaker_IM_r3.indd 6 8/18/20 4:05 PM8/18/20 4:05 PM
Loading ...
Loading ...
Loading ...