Loading ...
Loading ...
Loading ...
Apply the two Anti-Scratch Stickers made of silicone that are
provided in order to protect the exterior of the PFF.
The PFF switches off automatically at low battery voltage.
Check the plug and cable before you connect the power and
ensure it is 110 voltage.
Only connect the device as follows:
· With DC cable to a 12/24V plug socket in a vehicle
(e.g. cigarette lighter)
· With AC power supply connection cable to AC mains supply
When connected to the DC socket, disconnect it or turn Power
off when the engine is turned off, to prevent discharge of
the battery.
There is an Emergency Override switch on the side of the PFF.
If an electronic failure occurs, push down the switch from
“Normal Use” to “Emergency Override” mode.
If the PFF is operating with battery power supply and if the battery
voltage is low, the display will automatically shut off and the error
code “E1” will be displayed.
Normal Use
12/24V DC
Plug
Emergency
Override
Control Panel
Retractable
Handle
Anti-Scratch
Stickers
3
Loading ...
Loading ...
Loading ...