Loading ...
Loading ...
Loading ...
6
Recommendations
•Do not use abrasive pads for cleaning.
•To remove the anti-scale filter, take the kettle
off its base, and leave it to cool. Never
remove the filter when the appliance
contains hot water.
Any connection error will nullify the
warranty.
•The warranty excludes kettles that have
not been maintained properly and
descaled regularly.
•Never use any anti-scaling method other
than that recommended.
Use
•Before first use, rinse the inside of your
kettle, and boil and empty it twice.
•Place your kettle, on the base, on a stable
surface.(1)
Remove the lid by aligning the “∇” mark
with the “open” position and lifting it off
(2). To close the kettle, engage the lid, with
the spout cover set back, by placing the “∇”
mark to “open” and turn it clockwise to the
“lock” position. The protective cover will
block off the pouring spout. (3)
•With the kettle disconnected and removed
from its base, fill it through the spout or lid.
Please observe the minimum and the
maximum fill levels.(4)
•Close the lid (3), and place the kettle on its
base. (5)
•Switch on by pressing the “I” switch. (6)
•The kettle stops automatically as soon as the
water boils.(7)
•You can also switch the kettle off at any
time during the heating process by pressing
the “0” switch. (8)
•To pour, squeeze the release latch under the
handle. (9)
•Empty the water from your kettle completely
after each use.
Cleaning
To clean your kettle:
•Disconnect it and remove it from its base.
•Leave it to cool, and then clean it with a
damp sponge.
To clean the filter (models with filter):
Clean the filter regularly. Rinse it in clean
running water and use a nylon brush when
needed.
De-scaling
• Descale your kettle regularly.
• Use:
1) a descaler specifically intended for PLASTIC
kettles. Follow the manufacturer’s instruc-
tions closely.
2) or commercial white vinegar at 8°C.
Pour 1/2 l of vinegar into the kettle. Leave it
to work for one hour without heating.
3) or citric acid. Boil 0.5 l of water. Add 25 g
of citric acid. Leave it to work for 15
minutes.
• Repeat if necessary.
• If you are using citric acid, always dilute it
with water.
•Whatever method you use, always
empty your kettle and rinse it 5 or 6
times.
• Never descale your kettle when there is
no liquid inside (descaler, citric acid..).
• Before using again, rinse with cold water
then boil (max level) and discard the water
twice without drinking it.
In the event of a problem
•Check :
. the connection,
. that the kettle is correctly positioned on its
base,
. that the switch is in the "on" position by
pressing “I”.
. that the lid is locked in the "lock" position
and that the protective cover is blocking off
the spout
. that the kettle has not been used without
water. In this case:
take the kettle off its base, fill the appliance
with cold water, then try again.
Bouilloire US/F/E .PM6.5 20/09/04, 15:496
Loading ...
Loading ...
Loading ...