Loading ...
Loading ...
Loading ...
12
EN
Cleaning process
1. Open the lid, and ll the stainless steeltank with water.
Note: Running without water may damage the unit.
2. The item should be immerged well into the water. However, do not exceed
the“MAX” mark.
3. Close the lid, and plug in.
4. Plug the machine into proper power source and press “ ON / OFF ” switch
button to start cleaning. When washing, the indication light turns on. And it
will nish washing within tolerant time.
5. Press “ ON / OFF ” switch button to stop cleaning, when it is in the cleaning
process.
6. When the washing process is nished, unplug the power source. Open the
cover and take out the object. Finally, pour out the water and clean the
machine.
Cleaning methods
1. Put the object into the plastic cleaning basket under cleansing water. The
water level should be above the articles but not exceed the mark.
2. For large items, place the item as shown.
3. When item to be cleaned needs extensive cleaning or sterilizing, use
“Enhanced Cleaning” rst, then replace with clean water and add about 5-10
ml of liquid soap (used for washing hands) into the tank, and start the unit
with the working cycle as 90 s. After this working cycle nished, the item can
be cleaned extensively.
Loading ...
Loading ...
Loading ...